DFRobot
GPS Receiver for Arduino (Model A)
All Products
GPS & Location Sensors
New Arrivals
Sensors
Arduino
Brands and Manufacturers
LoRa & Cellular Modules
DFRobot
Sensors & Modules
Connectivity
$81.03
|
Out of stock
This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement. GPS receivers can be easily fo...
Estimated Delivery
Arrives
Disclaimer
Secure checkout
This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement.
GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. They are used to track the loaction all over the globe.
This GPS Receiver for Arduino is a unit which embeds a GPS module and an antenna in a small foot-print enclosure. By using TinyGPS library, Arduino can retrieve geographic coordinates (latitude and longitude, altitude), speed, heading and GMT time directly.
The update rate is an important performance index of a GPS receiver. Most GPS in mobile phones provide an update rate of 1Hz, which means, only one set of data can be retrieved in one second. This GPS receiver has an update rate of 5Hz, which means the data interval is greatly reduced and thus can be very useful in more demanding applications (e.g. on fast-moving vehicles).
Note: The new batch GPS mode changes its manufacturer Baudrate from 38400 to 115200 bps, you can refer to U-Blox Parameter Setting Protocol for the further setting. Pin Definition
- Black: RxD
- White: TxD
- Red: VCC
- Black (thick): GND
SPECIFICATION
- U-BLOX G6010 solution
- 5Hz output
- 115200bps TTL serial interface (New)
- 3.3V @ 41mA
- 50-Channel receiver
- Extremely high sensitivity -161dBm
- Accuracy 2.5m (Autonomous) / <2m[SBAS]
- Operating temperature: -40°C to 85°C
- Hot Start : 1s
- Warm Start : 32s
- Cold Start : 32s
- Ceramic Antena 25*25*2mm(0.98x0.98x0.08")
- Module Size 25*28*7.5mm(0.98x1.10x0.29")
- Enclosure Size 40x30x10mm(1.57x1.18x0.39")
- LED indicator
DOCUMENTS
- Wiki Page
- U-Blox Parameter Setting Protocol
- Introduction to GPS
- NMEA Reference Manual
- GPS Tutorial by Michael Simpson
SHIPPING LIST
- GPS Receiver for Arduino(Model) x1
Jargon buster
Plain-language definitions for the technical terms used above.
- GPS
- The US satellite navigation system used by GNSS receivers to calculate position and time. Support for GPS is important because it is widely available and often used together with other constellations for more reliable positioning.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- SBAS
- Satellite-Based Augmentation System, a set of regional services that broadcast correction information for GNSS receivers. SBAS can improve ordinary GPS-style positioning, although it is not the same as centimetre-level RTK correction.
- TTL serial
- A simple serial data connection that uses microcontroller logic-level signals rather than computer RS-232 voltage levels. It matters because the camera can connect directly to many microcontroller pins or a USB-to-TTL serial adapter, but not safely to an old-style RS-232 port without conversion.
Find this product in
Brands
Sensors & Input
Related Tutorials
Free guides on learn.littlebird.com.au
