Raspberry Pi Ltd
Electronics Kit for Raspberry Pi Pico 2 WH
All Products
Beginner's Electronics Kits
New Arrivals
Complete Kits & Projects
Circuitry & IOT
DIY Project Kits
Raspberry Pi
Electronics Kits
Raspberry Pi Pico
Pico
Raspberry Pi Pico Kits
Digital Technologies
Education
Learning & Starter Kits
Raspberry Pi Kits
Microcontrollers
STEM Education Kits
$39.00
|
In stock
If you're looking for a Raspberry Pi Pico 2W Starter Kit, look no further!This is an awesome and affordable electronics kit for the Raspberry Pi Pico 2W.The ...
Get notified when back in stock
Estimated Delivery
Arrives
Disclaimer
Secure checkout
If you're looking for a Raspberry Pi Pico 2W Starter Kit, look no further!
This is an awesome and affordable electronics kit for the Raspberry Pi Pico 2W.
The components of this Pico 2W Electronics Kit enable you to create electronics circuits for light and sound.
Pico 2 Breadboarding can be hard, that's why we've included a Raspberry Pi Pico 2W with soldered headers (done in Sydney, Australia) to make bread boarding easier.
This is an awesome and affordable electronics kit for the Raspberry Pi Pico 2W.
The components of this Pico 2W Electronics Kit enable you to create electronics circuits for light and sound.
Pico 2 Breadboarding can be hard, that's why we've included a Raspberry Pi Pico 2W with soldered headers (done in Sydney, Australia) to make bread boarding easier.
Includes:
- 1 x Pico 2W with soldered Headers
- 1 x 400 Point Breadboard
- 5 x 5mm LED Pack Multicolour
- 1 x Momentary Pushbutton Switch - 12mm Square
- 1 x Mini Photocell
- 1 x Active Buzzer
- 1 x Trimpot 10K with Knob
- 5 x 220ohm Resistors
- 2 x 10K Resistor
- 10 x Jumper wire F/M
- 10 x Jumper wire M/M
- 10 x Jumper wire F/F
- Fabric USB Micro-B Cable
- Little Bird Lorikeet
- Plastic case to keep all your parts in!
Jargon buster
Plain-language definitions for the technical terms used above.
- Headers
- Rows of connector contacts on a fixed pitch (commonly 2.54 mm) used to link a board to a breadboard, jumper wires, or another board. They come as male pin headers and female socket headers; when a module ships with pre-soldered headers it can be used straight away, whereas bare pads require soldering the pins yourself.
- LED
- A light-emitting diode (LED) is a small electronic component that emits light when current flows through it in the correct direction. Because it only conducts one way, its polarity matters, and a through-hole LED must be soldered the correct way around to light up.
- photocell
- A light-sensitive component whose electrical resistance changes with the amount of light falling on it. It matters when choosing or using light sensors, automatic lights, or brightness-detecting circuits because its response speed, resistance range, and sensitivity affect how reliably it detects light levels.
Find this product in
