Adafruit
Adafruit DotStar LED Strip - APA102 Warm White - 60 LED/m [~3000K]
The Adafruit DotStar APA102 Warm White LED Strip (60 LED/m, ~3000K) uses the same integrated DotStar driver as the RGB strips but with dedicated warm white p...
The Adafruit DotStar APA102 Warm White LED Strip (60 LED/m, ~3000K) uses the same integrated DotStar driver as the RGB strips but with dedicated warm white phosphor LEDs. The result is an incredibly bright, consistent warm white light — far superior to mixing RGB to approximate white.
Controlled via a 2-wire SPI interface at up to 32 MHz, each LED features 24-bit PWM brightness control at 20 KHz for smooth, flicker-free dimming. No timing-critical code is required, making these strips compatible with any microcontroller or microprocessor. This is the 60 LED/m density on white flex PCB, sold from 4-metre reels.
Key Features
- Warm White ~3000K – Dedicated white phosphor LEDs for true, consistent warm white light
- SPI Interface – 2-wire (clock + data) protocol works with any processor speed
- 24-Bit Brightness Control – High-frequency 20 KHz PWM for smooth, flicker-free dimming
- Up to 32 MHz Data Rate – Hardware SPI supported but not required
- Weatherproof Sheathing – Flexible PCB with protective coating
- Cuttable – Cut lines every 1 LED, solder to 0.1" copper pads
- Chainable – Connect strips together for longer runs
- 4-Pin JST SM Connectors – Included on each end of full reels
Also Available
- DotStar Warm White 30 LED/m (~3000K)
- DotStar Warm White 144 LED/m (~3000K)
- DotStar Cool White 30 LED/m (~6000K)
- DotStar Cool White 60 LED/m (~6000K)
- DotStar Cool White 144 LED/m (~6000K)
Ideal For
- Under-cabinet and task lighting
- Architectural accent and ambient lighting
- Photography and video lighting rigs
- Smart home lighting with programmable dimming
Package Contents
- 1× DotStar Warm White LED strip – 60 LED/m, ~3000K, 1 metre, white flex PCB
Jargon buster
Plain-language definitions for the technical terms used above.
- LED
- A light-emitting diode is a small electronic component that lights up when current flows through it in the correct direction. In this kit, LEDs create the flashing effect, so polarity and correct soldering matter for the project to work.
- microcontroller
- A microcontroller is a small computer on a chip that runs your program and controls connected inputs and outputs. For this product, it is the part that reads buttons and sensors, drives the display and speaker, and communicates over Bluetooth.
- PCB
- A printed circuit board is a rigid board with copper tracks that connect electronic parts without loose wires. For this kit, the PCBs also form the airplane shape, so they are both the circuit base and part of the finished model.
- PWM
- Pulse Width Modulation is a way for a digital pin to simulate variable output power by switching on and off very quickly. It matters for controlling things like LED brightness, motor speed, or servo-style signals from a microcontroller pin.
- RGB
- Short for red, green and blue, usually referring to an LED that can mix those three colours. It matters because controlling an RGB LED teaches how separate outputs combine to create different colours.
- SPI
- A fast serial communication bus often used for displays, memory cards, and sensors. It matters because SPI devices need specific pins for clock and data, plus a separate chip-select line for each device.
Find this product in
Brands
Related Tutorials
Free guides on learn.littlebird.com.au
