USB Cables

SKU: SF-CAB-28389 | Brand: SparkFun

This adapter cable lets a Teensy 4.1 or Teensy 3.6 use its USB host capability by converting the dedicated 5-pin USB host header connection into a standard female USB Type-A port.Once fitted, your Teensy can act as a ...

SKU: AF-6369 | Brand: Adafruit

This short USB-C cable is made for tidy, compact connections where a standard cable would take up too much space. It is well suited to linking USB-C devices inside an enclosure or anywhere you need a low-profile cable...

SKU: AF-6444 | Brand: Adafruit

This woven fabric lanyard looks like a cute space bear-themed conference accessory, but it also works as a USB-A to USB-C cable for powering and syncing your gadgets.It’s a handy match for an electronic badge at a hac...

SKU: AF-6367 | Brand: Adafruit

This short USB-C cable is designed for tight builds where a normal straight connector takes up too much space. The slim right-angle plugs and flexible ribbon-style cable make it handy for compact connections inside en...

SKU: LB-USB-C-TO-MICRO-USB | Brand: Little Bird

This USB-C (female) to MicroUSB (male) Adaptor enables your older Raspberry Pis (Raspberry Pi 3 Model B+, Raspberry Pi Zero W etc) to your Raspberry Pi  15W USB-C Power Supply! Note, this does not work with the...

SKU: LB-1601027 | Brand: Little Bird

This USB-C splitter cable converts a single USB-C port into three USB-C female outputs, allowing simultaneous connections for charging, data transfer, and audio. The cable supports USB 2.0 data speeds and Power Delive...

SKU: ET-2085464 | Brand: Little Bird

A 1-metre USB Type-A male to Micro-B male cable for powering and connecting devices such as Raspberry Pi, Arduino, and other microcontrollers. Suitable for both data transfer and power delivery via any standard USB po...

SKU: LB-USBTESTER | Brand: Little Bird

Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators; The tester is widely used in the quality inspection of 3C digital and peripheral products of USB interface....

SKU: RP-SC0257 | Brand: Raspberry Pi Ltd

Use your existing micro USB cables and power supplies with USB-C devices. This compact adapter converts a micro USB connector to USB-C, letting you power a Raspberry Pi 4 with your Pi 3 power supply. Key Features M...

SKU: EC-MCP00102W | Brand: Elecrow

This USB serial cable supplies +5V at up to 500mA (USB specification limit) along with TxD and RxD sginals -- no hardware handshaking. Now you can test the serial Data with this so cheap one to replace this FT232RL on...

SKU: SS-103990003 | Brand: Seeed Studio

A compact USB 2.0 hub with three USB-A ports and a built-in multi-format memory card reader. Bus-powered from a single USB port — no external power supply needed. Works with Raspberry Pi, laptops, desktops, and other ...

SKU: AT-P1906 | Brand: Little Bird

A 1.5 m USB 2.0 cable with a Type-A male connector on one end and a Micro-B male connector on the other, rated for up to 3 A of current. Designed for powering Raspberry Pi boards and other devices or projects that req...

SKU: AF-2185 | Brand: Adafruit

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. Perfect for connecting to your Raspberry Pi, Arduino Leonard...

SKU: AF-4259 | Brand: Adafruit

If you need to add a panel-mount connection for USB C, but don't have the time or tools to cut a custom oval or square hole, this Round Panel Mount Plug is the easiest and fastest way to panel-ify your project. It's a...

SKU: PI-ADP006 | Brand: Pimoroni

The USB to microUSB OTG Converter Shim is a tiny adapter that slides inside a full-sized USB-A male connector, converting it into a USB On-The-Go (OTG) compatible microUSB connection. It provides a compact, cable-free...

SKU: PI-CAB0225 | Brand: Pimoroni

A short 10 cm USB A to Micro-B cable with a matte black finish and 22 AWG power lines for minimal voltage drop. The TPE cable shroud provides durability and flexibility. Key Features 10 cm Length – Compact cable fo...

SKU: AF-4471 | Brand: Adafruit

The Adafruit MCP2221A Breakout lets your computer talk directly to I2C devices, sensors, and GPIO — no microcontroller required. Drive an OLED display, read a colour sensor, flash LEDs, or read buttons straight from P...

SKU: PI-CAB0231 | Brand: Pimoroni

A 1-metre USB-A to Micro-B cable in matte red with a TPE cable shroud for durability and flexibility. Featuring 22 AWG power lines for low voltage drop, it's well suited for both data transfer and powering devices lik...

SKU: SF-DEV-15096 | Brand: SparkFun

This SparkFun Serial Basic Breakout is an easy-to-use USB-to-Serial adapter based on the CH340G and takes advantage of the handy USB-C connector. With USB-C you can get up to three times the power delivery over the pr...

SKU: AF-3879 | Brand: Adafruit

As technology changes and adapts, so does Adafruit! Rather than the regular USB A, this cable has USB C to Micro B plugs!USB C is the latest industry-standard connector for transmitting data and power. Like Lightning ...