USB Cables

SKU: SF-BOB-00549 | Brand: SparkFun

Use this unique device to download data and control GPIB bus enabled oscilloscopes, logic analyzers, function generators, power supplies, and any other GPIB instrument seamlessly through USB! Features: Drivers for ...

SKU: SF-CAB-00512 | Brand: SparkFun

This is a standard issue USB 2.0 cable. This is the most common A to B Male/Male type peripheral cable, the kind that’s usually used for printers. Compatible with most SFE designed USB boards as well as USB Arduino bo...

SKU: DF-FIT0351-OE | Brand: DFRobot

Simple and practical design with bold and dazzling color, it's a collision of undertone and publicity, making yourself stand out and become a trendsetter. Gold plating crafts assure the quality and efficiency of da...

SKU: TB-WC7702 | Brand: Little Bird

A 1.8 m USB 2.0 Type-A extension cable with a male plug on one end and a female socket on the other. Conforms to the USB 2.0 standard with data transfer speeds up to 480 Mbps. Useful for extending the reach of USB dev...

SKU: AF-1829 | Brand: Adafruit

A DIY Micro USB B female connector in a panel-mount-style shell. The black plastic shell can be glued into your project enclosure, with the Micro B connector press-fitted into place. The five pins are spaced for easy ...

SKU: SF-BOB-12731 | Brand: SparkFun

This is the SparkFun USB to Serial Breakout for the FT232RL, a small board with a built in USB to serial UART interface. This little breakout is built around the FT232RL IC from FTDI, with an internal oscillator, EEPR...

SKU: SF-BOB-09966 | Brand: SparkFun

A simple breakout board for the USB Mini-B connector, bringing all 5 pins out to a breadboard-friendly 0.1" pitch header. Useful for prototyping USB connections or as a convenient 5V power source (up to 100 mA, unregu...

SKU: AF-907 | Brand: Adafruit

This handy USB extension cable will make it easy for you to enclose a device that has a B type port. We think this would be most handy when putting an Arduino in a box.The jack half has two mounting 'ears' with M3 scr...

SKU: SF-DD-21211 | Brand: SparkFun

The Hydra is a handy USB power breakout cable for powering maker projects from a USB power supply or computer. It brings out the USB 5V and GND lines so you can connect them to common project power inputs without buil...

SKU: DF-FIT0990 | Brand: DFRobot

This high-performance USB4 USB-C cable is made for modern devices that need both fast data and serious power through a single connection. It supports up to 40Gbps data transfer, PD3.1 charging up to 240W, and Thunderb...

SKU: SF-CAB-28389 | Brand: SparkFun

This adapter cable lets a Teensy 4.1 or Teensy 3.6 use its USB host capability by converting the dedicated 5-pin USB host header connection into a standard female USB Type-A port.Once fitted, your Teensy can act as a ...

SKU: LB-1601027 | Brand: Little Bird

This USB-C splitter cable converts a single USB-C port into three USB-C female outputs, allowing simultaneous connections for charging, data transfer, and audio. The cable supports USB 2.0 data speeds and Power Delive...

SKU: AF-1318 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might mak...

SKU: LB-USBTESTER | Brand: Little Bird

Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators; The tester is widely used in the quality inspection of 3C digital and peripheral products of USB interface....

SKU: EC-MCP00102W | Brand: Elecrow

This USB serial cable supplies +5V at up to 500mA (USB specification limit) along with TxD and RxD sginals -- no hardware handshaking. Now you can test the serial Data with this so cheap one to replace this FT232RL on...

SKU: SS-103990003 | Brand: Seeed Studio

A compact USB 2.0 hub with three USB-A ports and a built-in multi-format memory card reader. Bus-powered from a single USB port — no external power supply needed. Works with Raspberry Pi, laptops, desktops, and other ...

SKU: LB-LR0293-3 | Brand: Little Bird

An 80 cm USB-A to Micro USB cable for data transfer and charging. Compatible with development boards such as the Arduino Leonardo, as well as Raspberry Pi, mobile devices, and other electronics that use a Micro USB co...

SKU: AT-P1906 | Brand: Little Bird

A 1.5 m USB 2.0 cable with a Type-A male connector on one end and a Micro-B male connector on the other, rated for up to 3 A of current. Designed for powering Raspberry Pi boards and other devices or projects that req...

SKU: AF-2185 | Brand: Adafruit

This is your standard USB A-Plug to Micro-USB cable. It's 2 meters long so you'll have plenty of cord to work with for those longer extensions. Perfect for connecting to your Raspberry Pi, Arduino Leonard...

SKU: AF-4261 | Brand: Adafruit

A round panel-mount USB-C pass-through adapter that lets you add a USB-C port to any enclosure using a simple drilled hole — no custom oval or square cutouts required. At approximately 30mm diameter, a standard hole s...