USB Cables

SKU: LB-LS1202 | Brand: Little Bird

Oooh it's so soft and pretty! If you have to have visible cables then you might as well have the nicest fabric bound cable with a eye-catching snake-like pattern.  That's why we now carry this standard A to micr...

SKU: LB-LR0130 | Brand: Little Bird

Features:Chip: FT232RL compatibleDraw out all signal port of FT232RL chip.RXD/TXD transceiver communication indicator.USB power supply, can choose 5V or 3.3V ,set by jumper.With over current protection, using 500MA...

SKU: RP-SC0727 | Brand: Raspberry Pi Ltd

Connect USB peripherals to devices with a micro USB port using this OTG (On-The-Go) host cable. Perfect for adding a keyboard, mouse, USB drive, or other accessories to your Raspberry Pi Zero, tablets, or Arduino Due....

SKU: LB-PT91063 | Brand: Little Bird

This cable is prefect for connecting your Micro:bit to you computer using USB-C.  With USB-C becoming standard this is a very handy cable for connecting your Micro:bit, Shakeup or Pico directly to you computer...

SKU: LB-LS1222 | Brand: Little Bird

Attach your laptop to external monitors, flash drives, keyboards, and more with this USB adapter that extends your USB-C port to USB-A.

SKU: LB-LS1832 | Brand: Little Bird

Create a USB powered device.  This 1 meter cable can be soldered to your project to provide 5v of power. 

SKU: LB-90-USB-C | Brand: Little Bird

A 90-degree right-angle USB-C male-to-female adapter, ideal for tight spaces where a straight connector won't fit. Supports USB 3.1 Gen 2 data transfer speeds up to 10Gbps and includes multiple built-in safety protect...

SKU: LB-LS4167 | Brand: Little Bird

This USB Male to USB Female + MicroUSB + USB-C Adapter is perfect for connecting your USB devices to your computer. It features a male USB connector on one end and a female USB connector on the other, as well as a ...

SKU: DF-FIT0265 | Brand: DFRobot

Micro USB 2.0 to USB type A cable, a standard USB connector for cellphones, Arduino Leonardo or other embeded boards to common computer connector. This is a consumer standard, smaller connector for USB devices. Mic...

SKU: WS-7965 | Brand: Waveshare

A USB to TTL serial adapter cable with an embedded PL2303 converter chip. This 1-metre cable provides a simple way to add serial communication to your projects, connecting a standard USB-A port to 3.3V TTL-level UART ...

SKU: LB-LS5638 | Brand: Little Bird

A 90-degree right-angle Micro USB male-to-female adapter that redirects your cable sideways, reducing strain on the connector and fitting neatly into tight spaces. The male end is right-angled while the female end is ...

SKU: AF-5450 | Brand: Adafruit

This cable will let you get rid of all those wall adapters you have stashed in the plastic bin in the basement. Instead of multiple wall warts with different power and current capabilities, this cable will convert any...

SKU: AF-4090 | Brand: Adafruit

The Adafruit USB C Breakout Board (Downstream Connection) gives you easy access to all the pins on a USB Type-C connector, configured for downstream device use. Two 5.1K resistors on the CC1 pins signal the upstream h...

SKU: LS-LS7430 | Brand: Little Bird

This short data cable connects a USB-C equipped computer, power bank or other device to a Micro USB device such as a micro:bit.At just 30 cm long, it is handy for classroom kits, maker benches and travel cases where a...

SKU: LB-LR0293-4A | Brand: Little Bird

This cable is the standard connection for Arduinos, Arduino like products and various other devices and doodads. Perfect to pick up as a spare for the workbench or draw in a conveniant length that will save you fro...

SKU: LB-1601104 | Brand: Little Bird

USB C to 3.5mm Audio Headphone Jack DAC Adapter OverviewThe USB C to 3.5mm Audio Headphone Jack DAC Adapter is your go-to solution for connecting traditional 3.5mm audio devices to modern USB-C devices without a headp...

SKU: AF-592 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0. Perfect for connecting a PC to your Metro, Feather, Raspberry Pi or other dev-board or microcontroller Approximately 3 feet / 1 meter long

SKU: DF-FIT0641 | Brand: DFRobot

This 1-metre USB-A to USB-C cable supports both data transfer and power delivery at up to 5V/3A (15W). It provides a reliable connection for charging and programming USB-C devices including the Raspberry Pi 4B, Jetson...

SKU: AF-1318 | Brand: Adafruit

This here is your standard A to micro-B USB cable, for USB 1.1 or 2.0, but with a twist! Literally! Instead of the cable coming straight out from the connector, there's a right angle bend. We thought this might mak...

SKU: SF-CAB-15464 | Brand: SparkFun

This panel mount USB micro-B extension cable enables you to more easily enclose a project that contains a USB micro-B port. The cable is 6" in length and includes two 14mm M3 screws compatible with the cable's 3mm ...