Temperature Sensors

SKU: EF-EF04070 | Brand: ElecFreaks

The Octopus LM35 Analog Temperature Brick is a plug-and-play temperature sensor module based on the TI LM35D precision centigrade temperature sensor. The LM35 outputs a voltage linearly proportional to temperature (10...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: SF-SEN-16294 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-SEN-16304 | Brand: SparkFun

The SparkFun TMP102 Qwiic breakout provides accurate digital temperature readings over I2C with minimal wiring. Based on the Texas Instruments TMP102, the sensor delivers 0.0625 °C resolution and ±0.5 °C accuracy, com...

SKU: SF-SEN-16467 | Brand: SparkFun

Looking to keep a log of the climate in your greenhouse, create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perf...

SKU: EF-EF04042 | Brand: ElecFreaks

The Octopus DS18B20 Digital Temperature Brick uses the DS18B20 1-Wire digital temperature sensor from Maxim IC to deliver accurate readings from −55 °C to +125 °C with ±0.5 °C accuracy. Each sensor has a unique 64-bit...

SKU: EF-EF04095 | Brand: ElecFreaks

This sensor is a temperature detector used to test the liquid temperature based on 18b20. Characteristics Standard 3-pin GVS ports is easy to plug. 3V working voltage can drive the micro:bit. Water-proof design ma...

SKU: AF-4369 | Brand: Adafruit

The Adafruit PCT2075 Temperature Sensor is a precise, affordable I2C temperature sensor and a drop-in replacement for the classic LM75. With an 11-bit ADC (compared to the LM75's 9-bit), it delivers finer temperature ...

SKU: DF-SEN0256 | Brand: DFRobot

The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitabl...

SKU: DF-SEN0264 | Brand: DFRobot

DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperatu...

SKU: AF-3895 | Brand: Adafruit

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare-wire bead-probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering whi...

SKU: AF-3846 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: AF-3515 | Brand: Adafruit

The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...

SKU: SF-SEN-15112 | Brand: SparkFun

The SCD30 from Sensirion is a high quality Nondispersive Infrared (NDIR) based CO₂ sensor capable of detecting 400 to 10000ppm with an accuracy of ±(30ppm+3%). In order to improve accuracy the SCD30 has temperature an...

SKU: LI-650-0022 | Brand: Little Bird

The littleBits Temperature Sensor responds to the ambient temperature surrounding its probe, sending a stronger signal as the temperature increases. It's a simple way to add temperature sensing to your littleBits circ...

SKU: AF-3721 | Brand: Adafruit

The AM2320 is a low-cost digital temperature and humidity sensor with an I2C interface — a simpler alternative to the classic DHT11/DHT22 sensors that require timing-critical bit-bang protocols. With standard I2C comm...

SKU: TB-RN3442 | Brand: Little Bird

A 47 kΩ NTC (Negative Temperature Coefficient) thermistor in a compact 5 mm radial package. NTC thermistors decrease in resistance as temperature rises, making them ideal for temperature sensing, thermal protection, a...

SKU: TB-RN3436 | Brand: Little Bird

A 1 kΩ NTC (negative temperature coefficient) thermistor in a 5 mm radial dipped-epoxy package. The resistance decreases as temperature increases, making it suitable for temperature sensing, thermal compensation, and ...

SKU: AF-1727 | Brand: Adafruit

The MAX31850K breakout board is a 1-Wire thermocouple amplifier with cold-junction compensation for K-type thermocouples. Unlike SPI-based amplifiers, the 1-Wire interface allows any number of thermocouple breakouts t...

SKU: AF-1778 | Brand: Adafruit

The AD8495 from Analog Devices is an analog-output K-type thermocouple amplifier on a compact breakout board. Simply power the board with 3–18V DC, connect a K-type thermocouple to the terminal block, and read the tem...