Temperature Sensors

SKU: LB-LR0214-16 | Brand: Little Bird

This compact 12V temperature controller features a 3-digit LED display for setting and monitoring temperature, along with a built-in 10A relay for switching heating or cooling loads. It uses an NTC thermistor probe (i...

SKU: LB-LR0102 | Brand: Little Bird

The DHT22 (also known in Australia by RHT03) is a low cost humidity and temperature sensor with a single wire digital interface. The sensor comes pre-calibrated and in a breadboard compatible module form so you don...

SKU: LB-LS2696 | Brand: Little Bird

A waterproof NTC thermistor temperature sensor with a 100cm (1 metre) cable and stainless steel probe. The 10KΩ resistance at 25°C and standard B-constant make it easy to read with an Arduino or other microcontroller ...

SKU: PR-PIM357 | Brand: Little Bird

The state-of-the-art BME680 breakout lets you measure temperature, pressure, humidity, and indoor air quality, and is Raspberry Pi and Arduino-compatible! Use this breakout to monitor every aspect of your indoor en...

SKU: LB-LS4690 | Brand: Little Bird

Digital temperature sensor DS18B20, waterproof case. Working range from -55 to 125 degrees. Resolution 0.5 in range from -10 up to 85 degrees.

SKU: DF-SEN0137 | Brand: DFRobot

DHT22 capacitive humidity sensing digital temperature and humidity module is one that contains the compound has been calibrated digital signal output of the temperature and humidity sensors. Application of a dedicate...

SKU: AF-5046 | Brand: Adafruit

The BME688 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...

SKU: LB-LR0298 | Brand: Little Bird

This stand alone DHT11 can read the temperature and humidity and send the information over a one wire, simplex serial bus. Arduino.cc provides a DHT11 library to aid in communicating with this module.**DHT11 Temper...

SKU: AF-2652 | Brand: Adafruit

The Adafruit BME280 Breakout is a precision environmental sensor from Bosch that measures temperature, barometric pressure, and humidity in a single package. With its excellent pressure accuracy, it also functions as ...

SKU: LB-LR20 | Brand: Little Bird

This kit brings together a wide range of sensor and interface modules for Arduino projects, experiments and classroom learning. It includes input sensors, output modules, switching modules, power modules and useful bu...

SKU: AF-5776 | Brand: Adafruit

The Adafruit Sensirion SHT41 is a high-accuracy temperature and humidity sensor with a true I2C interface, part of Sensirion's fourth-generation SHT4x family. Compared to the SHT40, the SHT41 offers significantly bett...

SKU: SF-SEN-00245 | Brand: SparkFun

The DS18B20 is a digital temperature sensor from Maxim (now Analog Devices) that communicates over a 1-Wire bus. It reports temperature in degrees Celsius with 9 to 12-bit configurable resolution. Each sensor has a un...

SKU: AF-4885 | Brand: Adafruit

The Adafruit Sensirion SHT40 is a high-accuracy temperature and humidity sensor featuring a true I2C interface for simple two-wire communication. Part of the fourth generation of Sensirion's acclaimed SHT sensor famil...

SKU: AF-3328 | Brand: Adafruit

The Adafruit PT100 RTD Temperature Sensor Amplifier is a breakout board for the MAX31865 precision RTD-to-digital converter. It reads 2-, 3-, or 4-wire PT100 platinum resistance temperature detectors over SPI, deliver...

SKU: AF-5183 | Brand: Adafruit

The DHT20 is a nice but inexpensive temperature and humidity sensor from the same folks that brought us the DHT22.This little sensor looks an awful lot like the popular DHT11/DHT22 temperature and humidity s...

SKU: AF-5190 | Brand: Adafruit

The Adafruit SCD-41 is a photoacoustic true CO2 sensor that directly measures carbon dioxide concentration in ambient air with a wide measurement range of 400 to 5,000 ppm. It also includes integrated temperature and ...

SKU: DF-SEN0414 | Brand: DFRobot

The SHTC3 digital humidity sensor from Sensirion builds on the success of the proven SHTC1 sensor and offers consistent high accuracy within the measuring range. The sensor covers a humidity measurement range of 0 to ...

SKU: AF-4867 | Brand: Adafruit

The Adafruit SCD-30 is a true NDIR (Non-Dispersive Infrared) CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. With an integrated...

SKU: DF-SEN0527 | Brand: DFRobot

The Fermion AHT20 is a high-precision, low-cost temperature and humidity sensor breakout from DFRobot. Built around an improved MEMS semiconductor capacitive humidity sensor element, it communicates over a standard I2...

SKU: AF-5064 | Brand: Adafruit

The SHT30-D sensor has an excellent ±2% relative humidity and ±0.5°C accuracy for most uses. Unlike earlier SHT sensors, this sensor has a true I2C interface.The enclosed box is a Sensiron SHT-30 digita...