Temperature Sensors

SKU: DF-SEN0435 | Brand: DFRobot

Compared to DS18B20, LM35, and other common temperature sensors, the MCP9808 is one of the more accurate temperature sensing options, with a typical accuracy of ±0.25°C and maximum accuracy of ±0.5°C over the sensor's...

SKU: DF-SEN0434 | Brand: DFRobot

The STS35 temperature sensor from Sensirion gives a fully calibrated, linearized, and supply-voltage-compensated digital output and has an outstanding accuracy of up to +/–0.1°C. It provides an operating temperat...

SKU: DF-SEN0332 | Brand: DFRobot

This Digital Temperature & Humidity Sensor Breakout Board is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap...

SKU: AF-5165 | Brand: Adafruit

The Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement over a simple I2C interface. Connect your thermocouple, wire up I2C (or use the solderless STE...

SKU: AF-4535 | Brand: Adafruit

The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...

SKU: SF-SEN-18521 | Brand: SparkFun

The SparkFun AS6212 Digital Temperature Sensor Breakout delivers high-accuracy temperature measurements with excellent low power consumption. Using the AS6212 sensor from ams AG, it achieves ±0.2 °C accuracy across a ...

SKU: EC-SEM02001S | Brand: Elecrow

Japan's Hokuriku resistive humidity sensor production as a Temperature & Humidity sensor.Application Idea Test and testing equipment; Automatic control; Weather station; Humidity regulator; Features Measure the relati...

SKU: DF-SEN0375 | Brand: DFRobot

BME680 is a 4-in-1 multi-functional MEMS environmental sensor which integrates VOC (Volatile Organic Compounds) sensor, temperature sensor, humidity sensor and barometer. It is designed for air quality monitor, and du...

SKU: EF-EF04087 | Brand: ElecFreaks

Octopus BME280 Pressure Sensor is an electric brick, which has integrated temperature sensor, air pressure sensor and humidity sensor onboard. We can use it to measure humidity, temperature and air pressure, or eve...

SKU: EF-EF04070 | Brand: ElecFreaks

The Octopus LM35 Analog Temperature Brick is a plug-and-play temperature sensor module based on the TI LM35D precision centigrade temperature sensor. The LM35 outputs a voltage linearly proportional to temperature (10...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: SF-SEN-16294 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-SEN-16304 | Brand: SparkFun

The SparkFun TMP102 Qwiic breakout provides accurate digital temperature readings over I2C with minimal wiring. Based on the Texas Instruments TMP102, the sensor delivers 0.0625 °C resolution and ±0.5 °C accuracy, com...

SKU: SF-SEN-16467 | Brand: SparkFun

Looking to keep a log of the climate in your greenhouse, create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perf...

SKU: EF-EF04042 | Brand: ElecFreaks

The Octopus DS18B20 Digital Temperature Brick uses the DS18B20 1-Wire digital temperature sensor from Maxim IC to deliver accurate readings from −55 °C to +125 °C with ±0.5 °C accuracy. Each sensor has a unique 64-bit...

SKU: EF-EF04095 | Brand: ElecFreaks

This sensor is a temperature detector used to test the liquid temperature based on 18b20. Characteristics Standard 3-pin GVS ports is easy to plug. 3V working voltage can drive the micro:bit. Water-proof design ma...

SKU: AF-4369 | Brand: Adafruit

The Adafruit PCT2075 Temperature Sensor is a precise, affordable I2C temperature sensor and a drop-in replacement for the classic LM75. With an 11-bit ADC (compared to the LM75's 9-bit), it delivers finer temperature ...

SKU: DF-SEN0256 | Brand: DFRobot

The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitabl...

SKU: DF-SEN0264 | Brand: DFRobot

DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperatu...

SKU: AF-3895 | Brand: Adafruit

Thermocouples are best used for measuring temperatures that can go above 100°C. This is a bare-wire bead-probe which can measure air or surface temperatures. Most inexpensive thermocouples have a vinyl covering whi...