Temperature Sensors

SKU: EF-EF04079 | Brand: ElecFreaks

Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...

SKU: LB-LR0010 | Brand: Little Bird

Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is availab...

SKU: TB-RN3444 | Brand: Little Bird

A 100 kΩ NTC (Negative Temperature Coefficient) thermistor in a radial dipped-epoxy package. These ceramic sensors change resistance rapidly with temperature, making them ideal for temperature measurement, compensatio...

SKU: DF-SEN0139 | Brand: DFRobot

This is a K type Thermocouple (Temperature sensor) which is very popular for 3D printers such as Ultimaker and Makerbot. You can hardly damage them or mishandle them. You just need an additional IC (Like an AD595) ...

SKU: SF-DEV-08777 | Brand: SparkFun

Detecting temperature changes has never been easier. The MCP9700 is a small thermistor type temperature sensor. This sensor will output 0.5V at 0 degrees C, 0.75V at 25 C, and 10mV per degree C. Doing an analog to dig...

SKU: AF-576 | Brand: Adafruit

Put a temperature meter anywhere with this very handy display. This panel meter displays the temperature of the attached waterproof 1% thermistor in °C. It does require a DC voltage to run, at 4.5-30VDC. It has revers...

SKU: EF-EF04070 | Brand: ElecFreaks

The Octopus LM35 Analog Temperature Brick is a plug-and-play temperature sensor module based on the TI LM35D precision centigrade temperature sensor. The LM35 outputs a voltage linearly proportional to temperature (10...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: DF-SEN0256 | Brand: DFRobot

The DFRobot TS01 is a non-contact infrared temperature sensor that measures surface temperature via infrared radiation. The all-metal IP65 housing provides protection against impact, water, and dust, making it suitabl...

SKU: DF-SEN0264 | Brand: DFRobot

DFRobot TS01 IR temperature sensor is a non-contact thermal sensor, which can be used to measure the infrared intensity of the object so as to calculate its surface temperature without touching. The built-in temperatu...

SKU: LI-650-0022 | Brand: Little Bird

The littleBits Temperature Sensor responds to the ambient temperature surrounding its probe, sending a stronger signal as the temperature increases. It's a simple way to add temperature sensing to your littleBits circ...

SKU: TB-RN3442 | Brand: Little Bird

A 47 kΩ NTC (Negative Temperature Coefficient) thermistor in a compact 5 mm radial package. NTC thermistors decrease in resistance as temperature rises, making them ideal for temperature sensing, thermal protection, a...

SKU: TB-RN3436 | Brand: Little Bird

A 1 kΩ NTC (negative temperature coefficient) thermistor in a 5 mm radial dipped-epoxy package. The resistance decreases as temperature increases, making it suitable for temperature sensing, thermal compensation, and ...

SKU: AF-1778 | Brand: Adafruit

The AD8495 from Analog Devices is an analog-output K-type thermocouple amplifier on a compact breakout board. Simply power the board with 3–18V DC, connect a K-type thermocouple to the terminal block, and read the tem...

SKU: SF-SEN-00251 | Brand: SparkFun

36" high temperature Type-K Thermocouple with glass braid insulation.

SKU: AF-249 | Brand: Adafruit

This pack includes everything you need to build a light and temperature data logger with an Arduino. The Adafruit data logger shield records sensor readings to an SD card with real-time timestamps, while the included ...

SKU: DF-SEN0198 | Brand: DFRobot

What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to me...

SKU: DF-SEN0451 | Brand: DFRobot

This industrial Gravity kit measures electrical conductivity in aqueous solutions, helping you evaluate water quality by tracking dissolved content or salinity. It is suited to hydroponics, aquaculture and environment...

SKU: SF-SEN-17059 | Brand: SparkFun

This PT100 is a platinum RTD (Resistance Temperature Detector) for accurate temperature sensing. It has a nominal resistance of 100Ω at 0°C, with resistance changing as temperature changes.It is suitable for applicati...

SKU: LB-DHT11-SENSOR | Brand: Little Bird

The Little Bird DHT11 Temperature and Humidity Sensor Module provides calibrated digital temperature and humidity readings from a single sensor. Designed and made in Sydney, Australia, it requires no extra components ...