Temperature Sensors

SKU: SF-SEN-15805 | Brand: SparkFun

The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs w...

SKU: AF-4089 | Brand: Adafruit

Get precise temperature readings with the ADT7410 High Accuracy I2C Temperature Sensor from Analog Devices. Featuring 16-bit resolution (0.0078°C) and ±0.5°C accuracy, this breakout delivers reliable measurements over...

SKU: AF-3721 | Brand: Adafruit

The AM2320 is a low-cost digital temperature and humidity sensor with an I2C interface — a simpler alternative to the classic DHT11/DHT22 sensors that require timing-critical bit-bang protocols. With standard I2C comm...

SKU: AF-1727 | Brand: Adafruit

The MAX31850K breakout board is a 1-Wire thermocouple amplifier with cold-junction compensation for K-type thermocouples. Unlike SPI-based amplifiers, the 1-Wire interface allows any number of thermocouple breakouts t...

SKU: AF-3251 | Brand: Adafruit

The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperat...

SKU: AF-642 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor made with a PTFE wire cable. Handy for when you need to measure something far away, or in wet conditions. This sensor is a little more expensive th...

SKU: AF-6403 | Brand: Adafruit

This compact breakout uses Melexis' MLX90632 FIR sensor to read the temperature of a target without making contact. It's handy for checking surfaces that are hot, cold, moving, delicate or awkward to reach with a prob...

SKU: AF-6478 | Brand: Adafruit

This compact breakout combines the STCC4 CO2 sensor with a Sensirion SHT41 temperature and humidity sensor for convenient indoor air monitoring. The STCC4 measures true CO2 using a thermal conductivity method rather t...

SKU: AF-6482 | Brand: Adafruit

Built around Texas Instruments' TMP119, this breakout makes it easy to add extremely accurate temperature monitoring to your project over I2C. It is designed for applications where temperature really matters, includin...

SKU: DF-SEN0678 | Brand: DFRobot

This Gravity air quality module uses Sensirion’s STCC4 gas sensing chip to directly measure carbon dioxide with the thermal conductivity measurement principle. It is designed for compact, cost-effective indoor monitor...

SKU: DF-SEN0664 | Brand: DFRobot

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...

SKU: PR-PIM638 | Brand: Little Bird

A wireless environmental monitoring board to keep track of inside conditions in your home, office or other habitat. Onboard sensors can measure temperature, humidity, pressure, gas and light. The top of the range...

SKU: LB-LS4690-50CM | Brand: Little Bird

A waterproof DS18B20 digital temperature probe with a 0.5m cable and XH2.54mm connector. Ideal for monitoring temperatures in wet or harsh environments including aquariums, hydroponics, brewing, and outdoor weather st...

SKU: AF-270 | Brand: Adafruit

A Type-K thermocouple with fiberglass braid insulation, rated to 500°C — far beyond the ~200°C limit of standard vinyl-insulated thermocouples. The bare bead probe design is suited to measuring both air and surface te...

SKU: AF-5989 | Brand: Adafruit

The Adafruit HDC3021 is a high-precision I²C temperature and humidity sensor breakout featuring the TI HDC302x series chip. With typical humidity accuracy of ±0.5% RH (and just 0.19% long-term drift) and temperature a...

SKU: PR-PIM181 | Brand: Little Bird

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables!It's ideal for monitoring c...

SKU: PI-COM1701 | Brand: Pimoroni

The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to provide t...

SKU: PI-RPI-005 | Brand: Pimoroni

Make your Raspberry Pi into an Astro Pi with the Sense HAT - Pressure, humidity, temperature and orientation sensors combined with a beautiful 8x8 LED matrix!Attach the HAT to your Pi's GPIO pins and you can...

SKU: PR-PIM031 | Brand: Little Bird

The Weather module reads temperature and pressure. It's ideal for setting up a mini weather station to monitor conditions in your house or garage. Features BMP280 sensor Detects temperature and pressure ...

SKU: PR-PIM203 | Brand: Little Bird

Enviro pHAT packs 4 different sensors, letting you measure temperature, pressure, light level, colour, 3-axis motion, compass heading, and analog inputs. That's up to 10 different variables! It's ideal for monitoring ...