Temperature Sensors

SKU: SF-SEN-11050 | Brand: SparkFun

This sealed digital temperature probe lets you precisely measure temperatures in wet environments with a simple 1-Wire interface. The DS18B20 provides 9 to 12-bit (configurable) temperature readings over a 1-Wire i...

SKU: AF-165 | Brand: Adafruit

The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert ...

SKU: AF-3263 | Brand: Adafruit

The Adafruit Universal Thermocouple Amplifier MAX31856 Breakout reads temperature from virtually any thermocouple type — K, J, N, R, S, T, E, or B — with 0.0078125°C resolution and a measurement range of -210°C to +18...

SKU: AF-269 | Brand: Adafruit

The MAX31855 Thermocouple Amplifier Breakout converts K-type thermocouple readings into digital data via SPI, handling cold-junction compensation automatically. It measures temperatures from −200°C to +1350°C in 0.25°...

SKU: SF-SEN-18367 | Brand: SparkFun

A sealed, waterproof DS18B20 digital temperature probe for precise measurements in wet or harsh environments. The sensor communicates over a 1-Wire interface, requiring just one data pin (plus ground) to connect to yo...

SKU: AF-5181 | Brand: Adafruit

The AM2301B is an affordable enclosed temperature and humidity sensor featuring an I2C interface — a modern upgrade over the classic DHT22/AM2302 sensors that required bit-bang timing protocols. Inside is the proven A...

SKU: AF-2857 | Brand: Adafruit

The Adafruit Sensirion SHT31-D is a high-accuracy temperature and humidity sensor with a true I2C interface and PTFE filter for protection against dust and contaminants. Part of Sensirion's third-generation SHT sensor...

SKU: SF-SEN-13715 | Brand: SparkFun

This is a stainless steel, Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals, connecting them at the two ends, and making a temperature gradient between one end and the othe...

SKU: SF-SEN-19096 | Brand: SparkFun

The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...

SKU: DF-SEN0511 | Brand: DFRobot

This waterproof DS18B20 digital temperature sensor delivers accurate readings over a simple 1-Wire interface, requiring just a single data pin on your microcontroller. The sealed probe and silicone lead wire make it i...

SKU: AF-4821 | Brand: Adafruit

The Adafruit TMP117 is a high-accuracy I2C temperature sensor from Texas Instruments, offering 16-bit resolution (0.0078°C) and up to ±0.1°C accuracy across the most common temperature ranges. It's ideal for applicati...

SKU: SF-SEN-16295 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: AF-6413 | Brand: Adafruit

The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...

SKU: AF-6174 | Brand: Adafruit

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...

SKU: AF-5182 | Brand: Adafruit

The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with...

SKU: DF-SEN0254 | Brand: DFRobot

The TC01 is a non-contact infrared temperature sensor with a 16×4 pixel array, producing a 64-pixel thermal image. Housed in a waterproof, dustproof metal enclosure (IP65), it communicates via RS485 using the standard...

SKU: SF-SEN-13676 | Brand: SparkFun

The SparkFun BME280 Atmospheric Sensor Breakout measures barometric pressure, humidity, and temperature in a compact package. Whether you're building a weather station, home automation system, or indoor air quality mo...

SKU: SF-SEN-13266 | Brand: SparkFun

The SparkFun MAX31855K Thermocouple Breakout is a simple 14-bit resolution, SPI-compatible, serial interface thermocouple digitizer that makes reading a wide range of temperatures possible. A thermocouple works by ...

SKU: AF-6420 | Brand: Adafruit

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...

SKU: AF-6331 | Brand: Adafruit

The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...