Temperature Sensors

SKU: EF-EF04070 | Brand: ElecFreaks

The Octopus LM35 Analog Temperature Brick is a plug-and-play temperature sensor module based on the TI LM35D precision centigrade temperature sensor. The LM35 outputs a voltage linearly proportional to temperature (10...

SKU: SF-SEN-16294 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-SEN-16467 | Brand: SparkFun

Looking to keep a log of the climate in your greenhouse, create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perf...

SKU: EF-EF04042 | Brand: ElecFreaks

The Octopus DS18B20 Digital Temperature Brick uses the DS18B20 1-Wire digital temperature sensor from Maxim IC to deliver accurate readings from −55 °C to +125 °C with ±0.5 °C accuracy. Each sensor has a unique 64-bit...

SKU: SF-SEN-15805 | Brand: SparkFun

The SparkFun Qwiic TMP117 breakout is a high precision temperature sensor equipped with an I2C interface. It outputs temperature readings with high precision of ±0.1°C across the temperature range of -20°C to +50°Cs w...

SKU: AF-4369 | Brand: Adafruit

The Adafruit PCT2075 Temperature Sensor is a precise, affordable I2C temperature sensor and a drop-in replacement for the classic LM75. With an 11-bit ADC (compared to the LM75's 9-bit), it delivers finer temperature ...

SKU: AF-992 | Brand: Adafruit

This pressure sensor from Freescale is a great low-cost sensing solution for measuring barometric pressure. At 1.5 hPa resolution, it's not as precise as our favorite pressure sensor, the BMx280 series, which has u...

SKU: AF-4089 | Brand: Adafruit

Get precise temperature readings with the ADT7410 High Accuracy I2C Temperature Sensor from Analog Devices. Featuring 16-bit resolution (0.0078°C) and ±0.5°C accuracy, this breakout delivers reliable measurements over...

SKU: AF-1727 | Brand: Adafruit

The MAX31850K breakout board is a 1-Wire thermocouple amplifier with cold-junction compensation for K-type thermocouples. Unlike SPI-based amplifiers, the 1-Wire interface allows any number of thermocouple breakouts t...

SKU: AF-1778 | Brand: Adafruit

The AD8495 from Analog Devices is an analog-output K-type thermocouple amplifier on a compact breakout board. Simply power the board with 3–18V DC, connect a K-type thermocouple to the terminal block, and read the tem...

SKU: SF-SEN-14049 | Brand: SparkFun

The MAX31820 ambient temperature sensor provides 9-bit to 12-bit Celsius temperature measurements with ±0.5°C accuracy over a +10°C to +45°C temperature range. Over its entire -55°C to +125°C operating range, the devi...

SKU: SF-SEN-13314 | Brand: SparkFun

The TMP102 is an easy-to-use digital temperature sensor from Texas Instruments. The TMP102 breakout allows you to easily incorporate the digital temperature sensor into your project. While some temperature sensors use...

SKU: AF-3251 | Brand: Adafruit

The Adafruit Si7021 is a temperature and humidity sensor from Silicon Labs with a PTFE filter for protection against dust and contaminants. It provides ±3% relative humidity accuracy over 0–80% RH and ±0.4 °C temperat...

SKU: SF-SEN-10740 | Brand: SparkFun

An evaluation board for the MLX90614 non-contact infrared thermometer sensor. It pairs the MLX90614 with an ATmega328 running at 3.3 V (8 MHz Arduino bootloader), giving you a ready-to-use IR temperature sensor with s...

SKU: AF-1899 | Brand: Adafruit

The Adafruit HTU21D-F is an accurate I²C digital temperature and humidity sensor breakout board. With typical humidity accuracy of ±2% (optimised for 5–95% RH) and temperature accuracy of ±1°C across -30 to 90°C, it's...

SKU: DF-SEN0198 | Brand: DFRobot

What sensor should you use when you need to measure temperature? Most people will think of a DS18B20 temperature sensor first, but this sensor is only capable of measuring temperatures up to 125C. In order to me...

SKU: AF-6403 | Brand: Adafruit

This compact breakout uses Melexis' MLX90632 FIR sensor to read the temperature of a target without making contact. It's handy for checking surfaces that are hot, cold, moving, delicate or awkward to reach with a prob...

SKU: DF-SEN0667 | Brand: DFRobot

This compact Fermion module is built around Bosch Sensortec’s BMP581 high-performance barometric pressure sensor chip. It measures pressure and temperature with high precision, offering ±0.3 hPa typical absolute press...

SKU: AF-6411 | Brand: Adafruit

Bosch’s BMP580 is a precision barometric pressure, temperature and altimeter sensor for projects that need fine height or pressure tracking. It follows on from Bosch’s BMP2xx and BMP3xx sensors and can be used over ei...

SKU: AF-6407 | Brand: Adafruit

This Bosch BMP581 breakout is a precision barometric pressure, temperature and altimeter sensor for environmental sensing, drones, wearables and projects that need to track height above sea level. It offers much finer...