Standoffs & Screws

SKU: AF-2392 | Brand: Adafruit

Whaddya got a screw loose or something?This 3/8" to 1/4" Adapter Screw is super handy if you're building projects that connect to a tripod or a camera. It's a simple fix for getting a tripod with a 1/4" machine screw ...

SKU: DF-FIT0223 | Brand: DFRobot

A medium-sized aluminium heat sink with pre-applied 3M 8810 thermal adhesive tape on the back. Simply peel off the blue protective film and stick it directly onto your IC or chip — no thermal paste or glue required. T...

SKU: DF-FIT0294 | Brand: DFRobot

A 10-pack of M3 × 6mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cle...

SKU: DF-FIT0273 | Brand: DFRobot

A 10-pack of M3 × 16mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: DF-FIT0281 | Brand: DFRobot

A 10-pack of M3 × 25mm low-profile hex head cap screws with matching nuts. The hex socket drive provides a more secure fastening than standard Phillips or slot-head screws, and the low-profile head sits flush for a cl...

SKU: SF-PRT-11796 | Brand: SparkFun

These nylon standoffs are ¾" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. The black nylon will give your project a very sessy look. ...

SKU: SF-PRT-13227 | Brand: SparkFun

These are Philips-head M3 screws. They are 12mm long and come in packs of three. This is the screw size that the MiP robotic Platform and its add-on boards uses. Check below for the associated hardware.

SKU: PL-1985 | Brand: Pololu

Keep your components separated with this 25-pack of 12mm-long (0.47") nylon spacers. These spacers have an outer diameter (OD) of 5 mm (0.20") and an inner diameter (ID) of 3.3 mm (0.13"), and they work with...

SKU: PL-1959 | Brand: Pololu

A pack of 25 steel machine screws in the #2-56 thread size with a 1-1/4″ (31.75 mm) length. These pan-head Phillips screws are zinc-plated for corrosion resistance and are commonly used in robotics, electronics enclos...

SKU: SF-PRT-10454 | Brand: SparkFun

Standard 4-40 zinc-plated hex nuts. A common thread size used in electronics enclosures, PCB mounting, and small hardware assemblies. Specifications Thread Size – 4-40 (UNC) Material – Zinc-plated steel Quantity ...

SKU: DF-FIT0064 | Brand: DFRobot

A 10-pack of M3 × 50mm hexagonal standoffs with matching screws and nuts. Use them to mount circuit boards, sensors, and other components with consistent 50mm spacing and secure mechanical support. At 50mm height, th...

SKU: SF-ROB-12365 | Brand: SparkFun

These center hole adaptors come in packs of four, are .08” thick, and have an outer diameter .54”. Their ½” diameter lip allows them to fit snuggly into the large holes on Actobotics™ channels that change them from...

SKU: SF-PRT-15432 | Brand: SparkFun

These aluminum hex standoffs are 2.375in. (60.33mm) long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table.Sold individually.Features: Screw, Thr...

SKU: SF-KIT-22197 | Brand: SparkFun

This GNSS Antenna Mounting Hardware Kit gives all of the basic parts you'll need to mount your antenna to a structure or support. We love to use this kit to secure one of our two GNSS Multi-Band Antennas (either the S...

SKU: SF-PRT-21232 | Brand: SparkFun

This is an M3 hex nut. For use with M3 screws.

SKU: SF-PRT-19296 | Brand: SparkFun

This is a 5-pack of the M.2 screws that SparkFun uses with the MicroMod ecosystem.MicroMod uses the common M.2 connector. This is the same connector found on modern motherboards and laptops. There are various location...

SKU: AF-5052 | Brand: Adafruit

A pair of red anodised aluminium bumper feet with embedded black rubber non-slip pads. Originally designed for keyboard enclosures, these sturdy feet add a polished look and stable footing to any electronics project o...

SKU: AF-5055 | Brand: Adafruit

A pair of silver anodised aluminium bumper feet designed for electronics enclosures, keyboard cases, and DIY projects. Each foot features a black rubber insert for non-slip grip and a clean metallic finish that comple...

SKU: AF-5053 | Brand: Adafruit

Keep your electronics from going barefoot, and give them sleek cyberpunk metal feet! These aluminum bumpers are originally designed for keyboard enclosures that are made of anodized aluminum with a black rubber nubbin...

SKU: AF-5248 | Brand: Adafruit

  Here is the perfect hardware kit to make a RP2040 QT Trinkey into any kind of USB-connected smart sensor with a QT-sensor-sandwich! You can assemble it with just a plain Phillips screwdriver. Takes less than...