Standoffs & Screws

Get cracking on your robot, fixture or gantry with this luxurious extruded aluminum starter kit. You get tons of stuff, so you won't end up frustra...

An essential for working with slotted aluminum extrusion, these slim metal nuts slide into the ends of the extrusion. The oval shape means that as ...

An essential for working with slotted aluminum extrusion, these slim metal nuts slide into the side-slot of the extrusion. The slightly oval shape ...

Cute as a button, these button-head hex screws are what we suggest for putting together a project with our slotted extruded aluminum. Use a 2.5mm h...

Cute as a button, these button-head hex screws are what we suggest for putting together a project with our slotted extruded aluminum. Use a 2.5mm h...

 If you need to connect a battery pack or wired power supply to a board that has a DC jack - this adapter will come in very handy! 2.1mm DC plug o...

Totaling 420 pieces, this White Nylon M2.5 Screw Set is a must-have smörgåsbord for your workstation. You'll have more than enough screws, nuts,...

0.3125" tall, brass swage attachable stand off. Non-threaded.

Description: These are standard locknuts with 4-40 thread. For use with 4-40 machine screws. They have a nylon insert that allows them to stay tigh...

Sometimes you need to fasten something down with a nut, but don’t want to worry about shorting anything. A nylon nut can save you the hassle of sho...

This handy bent-wire display stand was originally designed to hold up 7" tablets but the rubberized design is great for general purpose electron...

After a long day out harvesting in the terminal block fields, we've returned with a veritable bounty of these very nice and compact terminal blocks...

Finally we get our very own super sweet sixteen... 16 millimeters that is! Our Black Plated M/F Brass 16mm Standoffs are engineered specifically...

Combines the power of screw shield and prototyping shield. This Proto Screw shield offers a better way to do prototyping. The Screw termina...

These nuts can be used to install your circuit boards, sensors and mechanical mountings. The wide flange at one end with an uneven surface eli...

These are M3 Fly nuts. Great for circuitboard, mechanical, and sensor mounting. These nuts provide great grip for hand tightening, eliminating t...

These 16" long aluminum tubes have an outer diameter of 1", an inner diameter of 0.82", and a wall thickness of 0.09". When used with the mating tu...

These terminal blocks have terminals that hold and release wires through the simple adjustment of a screw, allowing you to easily make temporary co...

These side-entry screw terminal blocks have a pitch of 5 mm (0.197″). Each block has three terminals for the stripped ends of 22 – 14 AWG wires, ...

These zinc-plated socket head machine screws are 3/16” long and have a tread pitch of 6-32. Sold in packs of 25. Note: These screws require a 7/64...

Suitable for all kinds of circuit boards, sensors, mechanical support of the installation. They are great for building a multi-level rob...

These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bear...