SparkFun

SKU: SF-DEV-15270 | Brand: SparkFun

The gator:log is the perfect data logging tool for your next experiment. With the automation of the data collection process, gone are the days of rushing around with a pen and composition notebook to simultaneously re...

SKU: SF-KIT-15367 | Brand: SparkFun

The SparkFun Qwiic Kit for Raspberry Pi provides everything you need to start using I2C sensors and displays with your Raspberry Pi via the Qwiic connector system. The kit includes a Qwiic HAT that adds four Qwiic con...

SKU: SF-SEN-15436 | Brand: SparkFun

The SparkFun VEML6030 Ambient Light Sensor is a high-accuracy, 16-bit light sensor that measures ambient light in lux with a spectral response similar to the human eye. It connects via the Qwiic I2C system for solderl...

SKU: SF-DEV-15316 | Brand: SparkFun

Control up to 16 servo motors from your Raspberry Pi over I2C with the SparkFun Servo pHAT. By using I2C for PWM generation, this HAT keeps all your GPIO pins free for other tasks. It also provides a serial terminal c...

SKU: SF-CAB-15428 | Brand: SparkFun

A USB 2.0 Type-A to Micro-B cable with reversible connectors on both ends. No more fumbling with orientation — both the USB-A and Micro-B plugs insert correctly either way up, bringing USB-C convenience to your Micro-...

SKU: SF-SEN-15271 | Brand: SparkFun

The SparkFun gator:particle micro:bit Accessory Board incorporates the powerful MAX30102 sensor, enabling sensing of pulse oximetry (SpO2), heart rate (HR) monitoring, and particle (PM) detection. As part of SparkFun'...

SKU: SF-SEN-15272 | Brand: SparkFun

If your plants could talk, would they call out "Water me, Seymour?" Unfortunately (or fortunately, perhaps) plants have yet to develop the ability to speak. But thanks to the SparkFun gator:soil micro:bit Accessory Bo...

SKU: SF-PRT-15217 | Brand: SparkFun

The SparkFun LiPo Charger Plus is the souped-up power option in the SparkFun line of single-cell lithium polymer (LiPo) battery chargers. With this iteration, we've changed the input charge connector to USB-C and prov...

SKU: SF-COM-15208 | Brand: SparkFun

The SparkFun Buck-Boost Converter is a handy power accessory board that allows you to fine tune the amount of power your project receives. This converter can take an input voltage of anywhere from 3-16V which can then...

SKU: SF-PRT-15315 | Brand: SparkFun

A small plastic jig for bending 5 mm LED legs to a right angle, allowing you to mount LEDs sideways on a PCB. Simply insert a standard 5 mm two-leg LED into the holder, bend the leads over, and solder it to your board...

SKU: SF-TOL-15256 | Brand: SparkFun

The iFixit Essential Electronics Toolkit is a compact repair kit containing the precision tools needed for basic electronics maintenance and repair. It includes a selection of common and specialty driver bits, plastic...

SKU: SF-PRT-15307 | Brand: SparkFun

Cherry MX switches are great for building your own keyboards. Whether you are looking to build a full sized 108-key keyboard, your own 10-key, or just a custom input for your computer Cherry MX switches give you that ...

SKU: SF-TOL-15295 | Brand: SparkFun

One ruler to rule them all. This is a basic 12 inch ruler, but made from a PCB. We have included a lots of useful information on each side of the ruler that you might use on a daily basis including Wire Gauge holes, t...

SKU: SF-LCD-15143 | Brand: SparkFun

The SparkFun TFT LCD Breakout features a 1.8″ colour display with 128 × 160 pixel resolution and a 4-wire SPI interface. A built-in microSD card holder on the same SPI bus provides storage for images and multimedia fi...

SKU: SF-GPS-15210 | Brand: SparkFun

The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...

SKU: SF-GPS-15193 | Brand: SparkFun

The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...

SKU: SF-SEN-14722 | Brand: SparkFun

This SparkFun Distance Sensor Breakout utilizes the VL53L1X next generation ToF (Time of Flight) sensor module to give you the highly accurate measurements at long ranges for its size. The VL53L1X uses a VCSEL (V...

SKU: SF-SPX-14669 | Brand: SparkFun

The SparkFun BlackBoard is an Arduino Uno-compatible development board with a range of improvements over the standard Uno. It features the CH340G USB-to-serial converter for broad driver compatibility, a reinforced th...

SKU: SF-SEN-14599 | Brand: SparkFun

The LIDAR-Lite v3HP is a compact, high-performance optical distance measurement sensor from Garmin. Housed in a durable IPX7-rated enclosure, it delivers accurate range measurements from 5 cm to 40 m, making it an ide...

SKU: SF-SEN-14571 | Brand: SparkFun

It’s time to start utilizing the superior magnetometer, and what better way than to throw it onto an easy-to-use breakout board? The SparkFun MLX90393 Magnetometer Breakout is a triple-axis magnetic sensor bo...