SparkFun
Shop SparkFun Electronics products at Little Bird Electronics, Australia's trusted source for maker and electronics supplies. Browse our range of SparkFun development boards, Qwiic modules, sensors, displays, and accessories — all designed for easy prototyping and learning.
Whether you're building IoT projects, teaching STEM in the classroom, or prototyping professionally, SparkFun's well-documented ecosystem makes getting started straightforward. Fast shipping across Australia.
High Temperature Adhesive Tape - (1cm, 33m)
SKU: SF-PRT-10687 | Brand: SparkFun
A 33-metre roll of polyimide (Kapton-style) tape that withstands temperatures up to 258°C (496°F). This high-temperature adhesive tape is an excellent electrical insulator with good corrosion resistance, and its silic...
Out of stock
SparkFun Pressure Sensor Breakout - MS5803-14BA
SKU: SF-SEN-12909 | Brand: SparkFun
This is the MS5803-14BA Pressure Sensor Breakout, a high resolution pressure sensor with both an I2C and SPI interface. This MEMS pressure sensor measures the absolute pressure of the fluid around it which includes ai...
Out of stock
LED Tactile Button Breakout
SKU: SF-BOB-10467 | Brand: SparkFun
This simple breakout board makes it easy to use our LED tactile switches in a breadboard, or your next project. Note: Populate the board according to the polarity of the LED on the switch. The markings for the swi...
Out of stock
Standoffs Plastic (4-40; 3/8; 10 pack)
SKU: SF-PRT-10461 | Brand: SparkFun
These nylon standoffs are 3/8" long and tapped for a 4-40 screw. These are great for mounting your board in an enclosure, or just getting it up off the table. Each standoff has an outer diameter of 6mm. Sold in pack...
Out of stock
LED Tactile Button - Blue
SKU: SF-COM-10443 | Brand: SparkFun
This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up blue! So now you can get visual feedback, or light up your project. These have a 12mm body a...
Out of stock
LED Tactile Button - Red
SKU: SF-COM-10442 | Brand: SparkFun
A tactile push button with a built-in red LED, combining momentary switching with visual feedback in a single component. Press the button and it lights up red — ideal for control panels, interactive projects, and anyw...
Out of stock
LED Tactile Button - Green
SKU: SF-COM-10440 | Brand: SparkFun
This is a simple LED-illuminated tactile button with a green cap. It’s just like a basic tactile button, but it lights up green! So now you can get visual feedback, or light up your project. These have a 12mm body and...
Out of stock
LED Tactile Button- White
SKU: SF-COM-10439 | Brand: SparkFun
This is a simple LED-illuminated tactile button with a clear cap. It’s just like a basic tactile button, but it lights up white! So now you can get visual feedback, or light up your project. These have a 12mm body and...
Out of stock
SparkFun RGB and Gesture Sensor - APDS-9960
SKU: SF-SEN-12787 | Brand: SparkFun
This is the SparkFun RGB and Gesture Sensor, a small breakout board with a built in APDS-9960 sensor that offers ambient light and color measuring, proximity detection, and touchless gesture sensing. With this RGB and...
Out of stock
JST SH Jumper 4 Wire Assembly - 8
SKU: SF-PRT-10359 | Brand: SparkFun
This is a simple four wire cable. Great for jumping from board to board or just about anything else. These cables mate with the connectors listed below. They have bare wires on one end and a 4-pin JST SH connector on ...
Out of stock
Heaterizer XL-3000 Heat Gun
SKU: SF-TOL-10326 | Brand: SparkFun
The Heaterizer XL-3000 is a compact 300W heat gun suitable for heat-shrink tubing, basic plastic forming, and low-temperature PCB rework. It heats up quickly and is sized conveniently for bench work and electronics us...
Out of stock
DC Barrel Power Jack/Connector (SMD)
SKU: SF-PRT-12748 | Brand: SparkFun
A standard SMD (surface-mount) DC barrel power jack for use with common DC wall adapters. This is the same connector size used on most Arduino boards and many other development platforms. Key Features Surface-Mount...
Out of stock
Molex Jumper 6 Wire Assembly
SKU: SF-PRT-09922 | Brand: SparkFun
A six-wire cable assembly with a 6-pin Molex connector (0.1″ spacing) on one end and bare wires on the other. Includes the mating connector, making it easy to create board-to-board connections or custom wiring harness...
Out of stock
Molex Jumper 2 Wire Assembly
SKU: SF-PRT-09918 | Brand: SparkFun
A two-wire jumper cable with a 2-pin Molex connector (2.54 mm / 0.1" spacing) on one end and bare wire on the other. Includes the mating connector for the Molex header. Useful for board-to-board connections and genera...
Out of stock
SparkFun Full-Bridge Motor Driver Breakout - L298N
SKU: SF-BOB-09540 | Brand: SparkFun
This is a breakout board for the L298N full-bridge dual motor driver; which comes in a staggered, Multiwatt package. All pins of the L298N are broken out to a 15-pin 0.1" pitch header. Two mounting holes are also...
Out of stock
RedBoard Plus Arduino-Compatible Development Board
SKU: SF-DEV-18158 | Brand: SparkFun
This Arduino-compatible development board keeps the familiar Uno-style layout while adding a few genuinely handy upgrades for modern projects. Built around the ATmega328P, it works with the Arduino IDE and fits the Un...
Out of stock
HMC6343 Qwiic Digital Compass
SKU: SF-SEN-30183 | Brand: SparkFun
This compact digital compass module is built around the HMC6343, a fully integrated electronic compass designed to deliver reliable heading data without making your main microcontroller do all the processing.Unlike ba...
Out of stock
Portability Shield for SparkFun Development Boards
SKU: SF-DEV-27510 | Brand: SparkFun
Add the user interface and power features needed to take a compatible SparkFun development board into the field. This shield brings together battery power, charging, storage and controls in a compact add-on board.Powe...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared