SparkFun

SKU: SF-BOB-18012 | Brand: SparkFun

Qwiic is a very efficient way to quickly prototype an idea but not all Qwiic-enabled devices have two ports. The SparkFun Qwiic MultiPort adds additional ports to boards that have only one Qwiic port on the I2C bus. O...

SKU: SF-DEV-14495 | Brand: SparkFun

The SparkFun Qwiic Adapter provides the perfect means to make any old I2C board into a Qwiic-enabled board. This adapter breaks out the I2C pins from the Qwiic connectors to pins that you can easily solder with you...

SKU: SF-BOB-12918 | Brand: SparkFun

You’ve always wanted to output analog voltages from a microcontroller, the MCP4725 is the DAC that will let you do it! The MCP4725 is an I2C controlled Digital-to-Analog converter (DAC). A DAC allows you to send analo...

SKU: SF-DEV-19426 | Brand: SparkFun

The SparkFun OpenLog Artemis (OLA) is an open-source data logger built on the Artemis module (Cortex-M4F Apollo3 microcontroller). It comes pre-programmed to automatically detect, configure, and log data from Qwiic-en...

SKU: SF-GPS-24114 | Brand: SparkFun

The SparkFun GNSS L1/L5 Breakout - NEO-F10N, SMA is a standard precision GNSS board with meter-level positional accuracy. The NEO-F10N uses the L1/L5 bands instead of the more commonly seen L1/L2 bands. Utilizing the ...

SKU: SF-BOB-13601 | Brand: SparkFun

Are you low on I/O? No problem! The SX1509 Breakout is a 16-channel GPIO expander with an I2C interface – that means with just two wires, your microcontroller can interface with 16 fully configurable digital input/...

SKU: SF-WRL-13231 | Brand: SparkFun

The SparkFun ESP8266 Thing is a breakout and development board for the ESP8266 WiFi SoC — a popular platform for IoT and WiFi-connected projects. All module pins are broken out to breadboard-compatible rows, and on-bo...

SKU: SF-SEN-19096 | Brand: SparkFun

The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...

SKU: SF-DEV-18077 | Brand: SparkFun

🛇 Product Restrictions: To access certain features of the ATECC608A, users will need to contact Microchip and sign an NDA contract to obtain the complete datasheet. Due to the required NDA - technical support, an Ar...

SKU: SF-SEN-16295 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-BOB-15931 | Brand: SparkFun

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The SparkFun Qwiic Button Breakout simplifies all of those ...

SKU: SF-COM-15099 | Brand: SparkFun

Add another eight pins to your microcontroller using a MCP23008 port expander. The MCP23008 uses two I2C pins which can be shared with other I2C devices, and in exchange gives you eight general purpose pins. You can s...

SKU: SF-ROB-14538 | Brand: SparkFun

The SparkFun Haptic Motor Driver breakout board features the Texas Instruments DRV2605L, providing an easy way to add tactile feedback to your projects. Connect a vibration motor, communicate over I2C from any Arduino...

SKU: SF-PRT-14417 | Brand: SparkFun

Here is a tiny 4-pin Qwiic 1mm JST connector. This connector is used on all of our Qwiic-based boards and can be used to create your own I2C-based device compatible with the Qwiic system!Additionally, this connector w...

SKU: SF-BOB-11083 | Brand: SparkFun

The SparkFun FM Tuner Basic Breakout is built around the Silicon Labs Si4703 FM tuner IC, providing a full-featured FM radio receiver on a compact breakout board. Beyond standard FM reception, the Si4703 supports Radi...

SKU: SF-SEN-24540 | Brand: SparkFun

Forget ultrasonic and infrared sensors; the SparkFun Qwiic Pulsed Coherent Radar Sensor - Acconeer XM125 brings powerful 60 GHz radar technology to your projects. This sensor isn't limited to surface detection; it c...

SKU: SF-SEN-23880 | Brand: SparkFun

The SparkFun TMAG5273 Linear 3D Hall-Effect Sensor is a low-power, high-precision magnetic field sensor that detects the presence, strength, and direction of magnetic fields in three dimensions. Built on a standard 25...

SKU: SF-ROB-17590 | Brand: SparkFun

The SparkFun Qwiic Haptic Driver pairs a compact Linear Resonant Actuator (LRA) vibration motor with Dialog Semiconductor's DA7280 motor driver IC for projects that require haptic feedback. Control the vibration motor...

SKU: SF-KIT-18577 | Brand: SparkFun

The SparkFun Tinker Kit (STK) is a great way to get started with programming and hardware interaction with the Arduino programming language. This latest version of the STK adds in the Qwiic functionality. Each Spar...

SKU: SF-BOB-16842 | Brand: SparkFun

Buttons are an easy and tactile way to interface with your project, but why would you want to deal with debouncing, polling, and wiring up pull-up resistors? The Qwiic Button with built-in green LED simplifies all of ...