SparkFun

SKU: SF-TOL-19653 | Brand: SparkFun

The Wowstick 1F+ is a lithium-powered rechargeable electric screwdriver kit with 56 precision bits covering all the common styles used in electronics repair. The sleek aluminium driver pen features three built-in LEDs...

SKU: SF-KIT-19519 | Brand: SparkFun

The SparkFun 170uA PIR Breakout Starter Kit comes with everything you need to get started using Passive Infrared (PIR) sensors. PIR sensors are great for detecting motion in a small area around the sensor. The 170µA S...

SKU: SF-SEN-20176 | Brand: SparkFun

The SparkFun Qwiic Micro ISM330DHCX Six Degrees of Freedom IMU is a micro-sized 0.75in. by 0.30in. sensor featuring STMicroelectronics' ISM330DHCX; a high-performance 3D digital accelerometer and 3D digital gyroscope ...

SKU: SF-SEN-19833 | Brand: SparkFun

The SparkFun Qwiic Micro Pressure Sensor features the BMP384 pressure sensor from Bosch Sensortec. The BMP384 excels at high-resolution measurements (up to 21-bit) and uses a gel-filled cavity to provide extra res...

SKU: SF-GPS-19576 | Brand: SparkFun

When experimenting with GPS or RF it can be very handy to have the antenna on the top of your house or car with a clear view of the sky while you stay in doors and warm at your keyboard. This 2m (6.5ft) magnetic mount...

SKU: SF-KIT-19935 | Brand: SparkFun

The SparkFun MicroMod mikroBUS™ Starter Kit is designed to give you just what you need to start using the MicroMod and Click ecosystems side-by-side. The core of this kit is designed around the SparkFun MicroMod mikro...

SKU: SF-SEN-19451 | Brand: SparkFun

The SparkFun Qwiic Mini dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device i...

SKU: SF-ROB-19224 | Brand: SparkFun

A servo adapter cable with a shrouded male servo connector on one end and three individual breadboard-compatible pigtail wires on the other. Makes it easy to connect a servo to a breadboard, development board, or any ...

SKU: SF-SEN-19036 | Brand: SparkFun

A direct time-of-flight (dToF) sensor from AMS that measures distances up to 5 metres using SPAD (Single Photon Avalanche Photodiode) and histogram technology. The TMF8820 provides 3×3 multi-zone output with multi-obj...

SKU: SF-KIT-19627 | Brand: SparkFun

This is a 10 pack of the MyoWare® Reference 2.0 Cables. The MyoWare 2.0 Reference Cable is meant as an extension for the MyoWare 2.0 Muscle Sensor's reference pin. You will just need to insert the pin into its housing...

SKU: SF-SEN-19218 | Brand: SparkFun

The SparkFun Qwiic Mini dToF TMF8820 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device i...

SKU: SF-SEN-19037 | Brand: SparkFun

The SparkFun Qwiic dToF TMF8821 Imager is a direct time-of-flight (dToF) sensor that includes a single modular package with an associated Vertical Cavity Surface Emitting Laser (VCSEL) from AMS. The dToF device is bas...

SKU: SF-SWG-19631 | Brand: SparkFun

This is a sticker sized to the ATMEGA328 IC with the pinout printed on top.

SKU: SF-DEV-19254 | Brand: SparkFun

TIMI-Click is a unique breadboard compatible display development module designed to provide development boards/modules which have a mikroBUS™ Click socket a simple to interface display solution. TIMI Click is aimed to...

SKU: SF-LCD-19253 | Brand: SparkFun

TIMI-Click is a unique breadboard compatible display development module designed to provide development boards/modules which have a mikroBUS™ Click socket a simple to interface display solution. TIMI Click is aimed to...

SKU: SF-DEV-19257 | Brand: SparkFun

An adapter board that adds a MatesBUS interface to any development board with a mikroBUS Click socket, allowing direct connection of TIMI display modules (such as the TIMI-96). Communication between the host and the c...

SKU: SF-LCD-19251 | Brand: SparkFun

The TIMI-96 is a breadboard-compatible 0.96″ TFT LCD display module powered by the 4D Labs PIXXI-28 graphics processor. Designed to plug directly into a breadboard via its unique MatesBus interface, it lets you simula...

SKU: SF-SEN-18737 | Brand: SparkFun

The OAK-D-IoT-40 is an Embedded/IoT version of the OAK-D imaginf platform from Luxonis. This sensor can be used completely standalone or via USB with a host like normal USB-only variants of DepthAI. It has a built-in ...

SKU: SF-SEN-19325 | Brand: SparkFun

The SEN54 sensor module from Sensirion combines the measurement of particulate matter, VOC, humidity, and temperature in a single package. The SEN54 sensors provide fully calibrated outputs with a digital interface, a...

SKU: SF-CAB-18984 | Brand: SparkFun

This is the 100mm 16-way 0.5mm-pitch Flexible Printed Circuit used to interconnect smôl boards end to end. smôl is an ecosystem of miniature processor boards, peripheral boards, power boards and accessories. Designed ...