Sensors

SKU: DF-SEN0586 | Brand: DFRobot

The LPB40B is a single-point ranging LiDAR sensor based on Direct Time-of-Flight (DToF) technology. It measures distances from 0.05 to 40 m on high-reflectivity targets, with ±5 cm accuracy across the full range. The ...

SKU: DF-SEN0591 | Brand: DFRobot

##Introduction With a measurement range of up to 3m, the RS485 ultrasonic obstacle avoidance distance ranging sensor offers advantages such as small blind zones (Measurement accuracy: 1 + (S * 0.3%) cm), narrow measur...

SKU: DF-SEN0589 | Brand: DFRobot

The STL-27L is a compact 360° dToF (direct Time-of-Flight) LIDAR sensor with a measuring range of 0.03–25 m. It delivers high-resolution point cloud data at an angular resolution of 0.167° with a scanning frequency of...

SKU: DF-SEN0098-V2 | Brand: DFRobot

##Introduction This is an updated version. Retired Product: Gravity: Analog 50A Current Sensor (AC/DC) V1Get this low-power current sensor to monitor your project every second for saving energy or protecting the circu...

SKU: DF-SEN0598 | Brand: DFRobot

An IP68-rated ultrasonic obstacle avoidance sensor specifically designed for underwater applications. With a measurement range of 2–300cm and UART output, this compact sensor enables underwater vehicles and robots to ...

SKU: AF-6067 | Brand: Adafruit

The Adafruit LPS28 Pressure Sensor Breakout features the ST LPS28DFW — a barometric pressure sensor with an extended range up to 4060 hPa, far beyond the ~1260 hPa limit of most competing sensors. This makes it suitab...

SKU: AF-6062 | Brand: Adafruit

The Adafruit INA3221 breakout monitors current, voltage, and power on up to three independent power rails simultaneously over I2C. Each channel supports high or low-side measurement up to +26V DC at ±3.2A with ±1% pre...

SKU: DF-SEN0611 | Brand: DFRobot

The Gravity: Correlated Color Temperature (CCT) & ALS Meter is a high-performance light sensing device, specifically designed to meet the needs of professional videographers and photographers. With precise calibration...

SKU: DF-SEN0617 | Brand: DFRobot

The Gravity BME688 is an advanced MEMS environmental sensor from Bosch that measures temperature, humidity, barometric pressure, and volatile organic compounds (VOC) in a single compact module. It supports both I²C an...

SKU: DF-SEN0616 | Brand: DFRobot

The Gravity: Thin-film Pressure Sensor measures pressure through the deformation of a flexible film material. As pressure increases, the film deforms, producing higher analog output values, while lighter pressure resu...

SKU: WS-28730 | Brand: Waveshare

Elevate your precision measurement needs with our cutting-edge TOF (Time of Flight) Laser Range Sensor, designed for remarkable long-range detection with steadfast accuracy. Whether you're engineering automation solut...

SKU: EF-EF05004 | Brand: ElecFreaks

It is sensitive to changes in ambient temperature and humidity and can be used for high-temperature alarms and environmental humidity detection.PlanetX DHT11

SKU: EF-EF05028 | Brand: ElecFreaks

PM2.5 is the particulates in the air with a diameter less than or equal to 2.5 microns. It usually carries heavy metals and microorganisms, and it stays in the air for a long time, which has a great impact on human he...

SKU: EF-EF05036 | Brand: ElecFreaks

The Elecfreaks PlanetX WiFi Sensor adds wireless connectivity to your micro:bit projects via the ESP8266 module. Upload sensor data to IoT platforms, monitor readings remotely, and send commands back to your micro:bit...

SKU: EF-EF05047 | Brand: ElecFreaks

We provide the PlanetX RFID, two labels, and a card. The PlanetX RFID can write or read data in tags and cards without contact. Use it to make an unmanaged parking lot! PlanetX RFID

SKU: EF-EF05031 | Brand: ElecFreaks

The gas sensor is an essential sensor for environmental detection. ELECFREAKS PlanetX MQ2 Sensor can be used for smoke detection, the greater the smoke is, the greater the voltage value will be. It is able to detect t...

SKU: EF-EF05033 | Brand: ElecFreaks

The ELECFREAKS PlanetX MQ5 Sensor is an essential sensor for environmental detection. The ELECFREAKS PlanetX MQ5 Sensor can be used to detect the leakage of flammable gas, you can use it to make a household gas leak a...

SKU: EF-EF05030 | Brand: ElecFreaks

The gas sensor is an essential sensor for environmental detection. The ELECFREAKS PlanetX CO2 Sensor is designed to detect the concentration of CO2 with high sensitivity. The higher the concentration of CO2 is, the sm...

SKU: EF-EF05053 | Brand: ElecFreaks

The ELECFREAKS PlanetX 4-Channel Tracking Sensor has integrated 4 groups photocell recevier and the fill light LEDs(We call them all as the Probes). At the mean time, it is able to learn by itselft, which means it cou...

SKU: EF-EF05022 | Brand: ElecFreaks

ELECFREAKS PlanetX BME280 Environment Sensor is a combination sensor based on digital humidity, pressure, and temperature sensors. It is also able to calculate the altitude based on the air pressure value.Learn Plane...