Sensors

SKU: DF-SEN0291 | Brand: DFRobot

Gravity: I2C Digital Wattmeter is a high-resolution, high-precision, large-scale measurement module that can measure the voltage, current and power of various electronic modules and electrical equipment within 26V 8A,...

SKU: SF-SEN-15440 | Brand: SparkFun

The BME280 Atmospheric Sensor Breakout measures barometric pressure, relative humidity, and temperature from a single compact board. With both Qwiic (I2C) and 0.1″ header connections, it integrates easily into Arduino...

SKU: EF-EF04024 | Brand: ElecFreaks

This is a Rain/steam sensor from ElecFreaks. This steam sensor can be connected to the Arduino IO Expansion shield directly. The output voltage will increase when the humidity of the sensor surface goes up.You even co...

SKU: FT-HUMID | Brand: Freetronics

Measure temperature and relative humidity with this simple, Arduino-compatible sensor module based on the DHT22. With just three connections (GND, power, and data), you can read both temperature and humidity from a si...

SKU: LB-CTCBOX | Brand: Little Bird

Already run the Crack the Code unit of work and want to replenish your component box? At Little Bird Electronics we have put together a replenishment kit for your Crack the Code unit of work.   Kit Contains: ...

SKU: DF-SEN0239 | Brand: DFRobot

A digital infrared proximity sensor with adjustable detection range from 0 to 200 cm. Outputs a simple digital signal — HIGH when an obstacle is detected, LOW when clear. The detection threshold is adjustable via a re...

SKU: AF-1231 | Brand: Adafruit

The ADXL345 from Analog Devices is a triple-axis digital accelerometer with both I2C and SPI interfaces. This breakout board includes an on-board 3.3V regulator and logic-level shifting, making it easy to interface wi...

SKU: PR-PIM355 | Brand: Little Bird

Sense the world around you with enviro:bit! It's loaded with sensors for air and weather, colour and light, and sound, and slots right onto your micro:bit. Just slot in your micro:bit, then code enviro:bit wit...

SKU: AF-1272 | Brand: Adafruit

The Adafruit Ultimate GPS Logger Shield combines the popular Ultimate GPS module with a MicroSD card slot, giving your Arduino a complete GPS datalogging solution. Built around the MTK3339 chipset, it tracks up to 22 ...

SKU: AF-3986 | Brand: Adafruit

This T-Slot Photo Interrupter is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR light acro...

SKU: AF-3984 | Brand: Adafruit

For precision temperature sensing, nothing beats a Platinum RTD. Resistance temperature detectors (RTDs) are temperature sensors that contain a resistor that changes resistance value as its temperature changes, bas...

SKU: AF-3942 | Brand: Adafruit

The HC-SR04 is an ultrasonic distance sensor that measures distances from approximately 2 cm to 400 cm (best results between 10–250 cm). Widely used in robotics, automation, interactive art, and motion sensing project...

SKU: DF-SEN0240 | Brand: DFRobot

The Gravity Analog EMG Sensor by OYMotion detects surface electromyography (sEMG) signals to measure muscle and neural activity. The sensor amplifies the tiny sEMG signal (±1.5 mV) by 1000× and filters noise through d...

SKU: LB-LR0214-73A | Brand: Little Bird

Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes - there's a high powered...

SKU: LB-LR0205 | Brand: Little Bird

An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module a...

SKU: AF-1602 | Brand: Adafruit

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has ...

SKU: AF-2340 | Brand: Adafruit

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...

SKU: DF-SEN0237-A | Brand: DFRobot

This is a dissolved oxygen sensor kit, which is compatible with Arduino microcontrollers. This product is used to measure the dissolved oxygen in water, to reflect the water quality. It is widely applied in many wa...

SKU: DF-FIT0180 | Brand: DFRobot

This type of photoresistor is made of environment-friendly materials(no Cadmium and Lead) compared with the traditional CDS photoresistor. It changes resistance depending on the amount of light it is exposed to. Thes...

SKU: AF-2773 | Brand: Adafruit

Have your next project be controlled by your muscles with this pack of Muscle Sensor Surface EMG Electrodes! Pair the electrodes with the MyoWare Muscle Sensor and a microcontroller (ie. Arduino...