Sensors

SKU: AF-4258 | Brand: Adafruit

The Adafruit LPS35HW is a water-resistant barometric pressure and temperature sensor from ST. The sensing element is housed in a ceramic package with waterproof gel protection, making it safe to use in damp and humid ...

SKU: AF-2651 | Brand: Adafruit

The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...

SKU: AF-6413 | Brand: Adafruit

The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...

SKU: DF-SEN0590 | Brand: DFRobot

##Introduction This laser distance ranging sensor has a compact size, comparable to the size of a fingernail, and a measurement range of up to 4m. It is specifically designed to address the issues commonly found in di...

SKU: AF-6174 | Brand: Adafruit

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. Featuring a PTFE membrane for protection a...

SKU: SF-SEN-23715 | Brand: SparkFun

The SEN55 environmental node is a straightforward, all-in-one sensor solution platform for the accurate measurement of various environmental parameters, such as particulate matter, volatile organic compounds (VOCs), o...

SKU: AF-5744 | Brand: Adafruit

The Tiny Code Reader from Useful Sensors is a small, low-cost hardware module that reads QR codes. It's designed to be a simple way to provision a system, for example, by providing the Wi-Fi network name and password ...

SKU: SF-SEN-22398 | Brand: SparkFun

The SparkFun BMI270 Micro 6DoF IMU Breakout is a Qwiic-enabled breakout board based on the ultra-low power BMI270 from Bosch. This chip is a highly integrated, low-power IMU optimized for wearables providing precise a...

SKU: DF-SEN0562 | Brand: DFRobot

What is an Ambient Light Sensor?An ambient light sensor is a type of sensor that measures the amount of light in the surrounding environment. These sensors can be used in various applications, including lighting and b...

SKU: DF-SEN0466 | Brand: DFRobot

This is a sensor that detects carbon monoxide and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of carbon ...

SKU: AF-4375 | Brand: Adafruit

A simple I2C temperature sensor in a breadboard-friendly TO-220 package. The TC74A0 provides basic temperature readings with ±2°C accuracy — a straightforward choice when you need easy temperature logging or monitorin...

SKU: LB-LS1747 | Brand: Little Bird

A compact distance sensor with a measurement range of 10–180 cm, featuring both UART and I2C output interfaces. It operates on 3–5 V, making it compatible with Arduino and other microcontrollers. The sensor includes h...

SKU: DF-SEN0334 | Brand: DFRobot

Gravity: SHT31-F digital temperature and humidity sensor is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap ...

SKU: DF-SEN0263 | Brand: DFRobot

We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the sensor reach thermal equilibrium. This ca...

SKU: AF-3660 | Brand: Adafruit

The BME680 from Bosch delivers comprehensive environmental sensing in a single compact package. This precision sensor measures temperature, humidity, barometric pressure, and VOC gas levels, all accessible over I2C or...

SKU: DF-SEN0227 | Brand: DFRobot

This SHT20 I2C temperature & humidity sensor is equipped with waterproof probe. It comes with the 4C CMOSens® SHT20 temperature & humidity sensor chip and the probe has gone through dual waterproof protection test...

SKU: WS-31940 | Brand: Waveshare

Elevate your technological projects with our cutting-edge Long-wave IR Thermal Imaging Camera Module. Designed for seamless integration with Raspberry Pi and other development boards, this module is an ideal addition ...

SKU: DF-SEN0648 | Brand: DFRobot

The TOFSense F2P is a professional-grade laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 50m range, ±3cm accuracy, and 100Hz refresh rate, it's engineered for drones, traffic monitoring, indu...

SKU: AF-6420 | Brand: Adafruit

The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...

SKU: AF-6426 | Brand: Adafruit

The Adafruit STHS34PF80 is a compact IR presence and motion sensor that detects human and animal presence up to 4 metres away — without requiring a lens. Unlike traditional chunky PIR sensors with simple digital outpu...