Sensors

SKU: SF-SEN-26092 | Brand: SparkFun

Visualise magnetic fields in real time with a dense 8x8 array of Hall-effect sensors. This tile lets you observe nearby magnets, current flow in wires and fields generated by electric motors as a live magnetic image.T...

SKU: SF-SEN-30381 | Brand: SparkFun

This breakout pairs the Feyman (FMI) IM19 9DoF IMU with a board layout made for high-accuracy PNT and RTK GNSS projects. It combines MEMS sensor data with external GNSS RTK positioning information to provide precise a...

SKU: AF-4503 | Brand: Adafruit

Add motion and orientation sensing to your project with this compact 6 Degree of Freedom IMU breakout built around the ST LSM6DS3TR-C. It combines a 3-axis accelerometer for measuring gravity and acceleration with a 3...

SKU: AF-6455 | Brand: Adafruit

Build a digital nose for indoor air quality projects with this SGP41 gas sensor breakout. The Sensirion SGP41 is a fully integrated MOX gas sensor with I2C interfacing, so you do not need to manage heater control or a...

SKU: DF-SEN0654 | Brand: DFRobot

This lab-grade methane sensor is designed for quantitative CH₄ measurement in research settings, using TDLAS technology to report methane concentration in %LEL rather than the broad estimates typical of MQ-style gas s...

SKU: DF-SEN0682 | Brand: DFRobot

This compact full-solid-state LiDAR module uses a 64×8 DTOF matrix to measure 512 points at once, giving robots and automation projects a wider view of what is directly ahead. It is designed for forward obstacle avoid...

SKU: DF-SEN0664 | Brand: DFRobot

Built around the Bosch BMP585 chip, this Gravity module measures barometric pressure and temperature for altitude, weather and environmental sensing projects. Its gel-filled cavity and industrial protective cover help...

SKU: DF-SEN0665 | Brand: DFRobot

This compact Gravity module brings Bosch BMP581 pressure and temperature sensing to microcontroller projects that need stable altitude or environmental readings. It is designed for applications such as drone altitude ...

SKU: DF-SEN0475 | Brand: DFRobot

Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...

SKU: DF-SEN0639 | Brand: DFRobot

This compact digital anemometer measures air velocity for embedded electronics and intelligent control systems. It is built around the Posifa PAV3015D thermal sensing element, using temperature differences across a th...

SKU: DF-SEN0469 | Brand: DFRobot

This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...

SKU: SF-GPS-28731 | Brand: SparkFun

Built around the Septentrio mosaic-T module, this breakout is made for demanding timing applications such as high-accuracy time stamping, frequency synchronisation and GPS-disciplined oscillators (GPSDO).The mosaic-T ...

SKU: DF-SEN0704 | Brand: DFRobot

This flexible thin-film array gives robots, wearables and HCI projects a compact way to sense where pressure is being applied. It integrates 36 independent sensing points into a 15 x 15mm active area, enabling real-ti...

SKU: DF-SEN0646 | Brand: DFRobot

This ultra-compact dToF laser ranging sensor uses 940nm laser pulses to measure distance up to 7.8 metres with typical ±4cm accuracy. It is designed for precise, real-time ranging in compact robotics, drone, IoT and a...

SKU: SF-GPS-29469 | Brand: SparkFun

This SparkPNT Flex board combines Quectel's LG290P quad-band RTK GNSS receiver with the Feyman (FMI) IM19 IMU, providing centimetre-level positioning with tilt compensation and anti-jamming performance for demanding n...

SKU: SF-GPS-28997 | Brand: SparkFun

This GNSS Flex board combines a u-blox ZED-X20P all-band RTK GNSS receiver with a Feyman IM19 IMU, giving compatible carrier boards centimetre-level positioning plus compensated attitude data for demanding navigation ...

SKU: AF-5841 | Brand: Adafruit

This breakout makes it easier to add a camera module to capable hobby microcontrollers without needing a full computer or FPGA. It uses an OV5640 camera with a 5 Megapixel sensor element and a very-wide 160-degree fis...

SKU: AF-6049 | Brand: Adafruit

Add digital audio input to a capable microcontroller or single-board computer with this tiny breakout for the TDK ICS43434 I2S MEMS microphone. MEMS microphones detect sound like classic electret mics, but are much sm...

SKU: AF-6051 | Brand: Adafruit

Add magnetic sensing to your project with this breakout built around the Texas Instruments DRV5032 digital Hall effect sensor. Its digital output changes when the magnetic flux density threshold is crossed, making it ...

SKU: LB-DHT11-SENSOR | Brand: Little Bird

The Little Bird DHT11 Temperature and Humidity Sensor Module provides calibrated digital temperature and humidity readings from a single sensor. Designed and made in Sydney, Australia, it requires no extra components ...