Sensors

SKU: AF-4871 | Brand: Adafruit

A compact passive infrared (PIR) motion sensor that detects movement from people and animals at distances of 2 to 5 metres. Much smaller than standard PIR modules, this sensor is ideal for unobtrusive projects and plu...

SKU: DF-SEN0386 | Brand: DFRobot

A high-precision serial 6-axis accelerometer and gyroscope module with a built-in microprocessor, Kalman filter algorithm, and attitude solver. Outputs real-time roll, pitch, and yaw angles with a static accuracy of 0...

SKU: SF-GPS-17285 | Brand: SparkFun

The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive sign...

SKU: SF-SEN-17241 | Brand: SparkFun

The SparkFun ADXL313 Breakout is a low power, high resolution (up to 13-bits) 3-axis accelerometer for measurement up to ±4g. This breakout measures the static acceleration of gravity in tilt-sensing applications, as ...

SKU: SF-SEN-17050 | Brand: SparkFun

The MQ-9B is a CO and CH₄ gas detection sensor form Winsen. The sensing material of the MQ-9B is SnO2, which has a low conductivity in clean air. It detects carbon monoxide (1.5V) by method of cycling high and low tem...

SKU: SF-SEN-17049 | Brand: SparkFun

The MQ-2 is a smoke and combustible gas sensor manufactured by Winsen. It detects flammable gases and smoke in a concentration range of 300–10,000 ppm, with particularly high sensitivity to propane and smoke. It's wid...

SKU: EF-EF04100 | Brand: ElecFreaks

Octopus MG811 CO2 Gas Sensor is a CO2 electronic brick in our OCTOPUS series, the basic design for the outlook, PCB fixing holes and connections are the same with them.The higher the CO2 concentration is, the lower th...

SKU: EF-EF04087 | Brand: ElecFreaks

Octopus BME280 Pressure Sensor is an electric brick, which has integrated temperature sensor, air pressure sensor and humidity sensor onboard. We can use it to measure humidity, temperature and air pressure, or eve...

SKU: EF-EF04070 | Brand: ElecFreaks

The Octopus LM35 Analog Temperature Brick is a plug-and-play temperature sensor module based on the TI LM35D precision centigrade temperature sensor. The LM35 outputs a voltage linearly proportional to temperature (10...

SKU: DF-SEN0321 | Brand: DFRobot

The Gravity IIC Ozone Sensor measures ozone (O₃) concentration from 0 to 10 ppm with 10 ppb resolution using an electrochemical sensing element. Factory-calibrated for accurate readings out of the box, it connects via...

SKU: AF-4686 | Brand: Adafruit

The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...

SKU: AF-4648 | Brand: Adafruit

The Adafruit PCF8591 Quad 8-bit ADC + 8-bit DAC combines four analogue input channels and one analogue output channel in a single I2C breakout. Measure voltages from potentiometers, sensors, or other analogue sources ...

SKU: AF-4627 | Brand: Adafruit

The Adafruit H3LIS331 is an ultra-high-range triple-axis accelerometer capable of measuring up to ±400g across all three axes. Part of the ST LIS331 family, it's designed for applications where standard ±16g accelerom...

SKU: AF-4626 | Brand: Adafruit

The Adafruit LIS331 Accelerometer Breakout features the LIS331HH from ST — a triple-axis accelerometer capable of measuring up to ±24g, well beyond the ±16g limit of most standard accelerometers. It's ideal for high-i...

SKU: AF-4634 | Brand: Adafruit

Add motion, direction and orientation sensing to your project with this compact STEMMA QT version of the LSM9DS1 9-DOF sensor from Adafruit. The LSM9DS1 combines a 3-axis accelerometer, 3-axis magnetometer and 3-axis ...

SKU: AF-4633 | Brand: Adafruit

The Adafruit LPS22 Pressure Sensor Breakout features the ST LPS22HB — a tiny absolute barometric pressure sensor capable of measuring atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude ...

SKU: SF-SEN-16294 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-SEN-16304 | Brand: SparkFun

The SparkFun TMP102 Qwiic breakout provides accurate digital temperature readings over I2C with minimal wiring. Based on the Texas Instruments TMP102, the sensor delivers 0.0625 °C resolution and ±0.5 °C accuracy, com...

SKU: SF-SEN-16467 | Brand: SparkFun

Looking to keep a log of the climate in your greenhouse, create a humidor control system or want to track temperature and humidity data for a weather station project? The SparkFun SHTC3 Humidity Sensor may be the perf...

SKU: SF-SEN-16474 | Brand: SparkFun

The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout includes the MAX30101, a highly sensitive optical sensor and successor to the MAX30105 and MAX30102. The MAX30101 Brea...