Sensors

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...

SKU: DF-DFR0095 | Brand: DFRobot

An infrared transmitter is simply a Light Emitting Diode which generates IR light (invisible IR light)--light with a wavelength of between 1 mm and 750 nanometers, and some associated circuitry. In an infrared ...

SKU: SF-SEN-15901 | Brand: SparkFun

This Weather Meter Kit provides the three core sensors for a DIY weather station: an anemometer (wind speed), a wind vane (wind direction), and a rain gauge. All three sensors use passive magnetic reed switches rather...

SKU: AF-1766 | Brand: Adafruit

The "poor man's" accelerometer/motion sensor! These spring-vibration switches are high sensitivity non-directional vibration induced trigger switches. Inside is a very soft spring coiled around a long metal pin....

SKU: DF-SEN0244 | Brand: DFRobot

The Gravity Analog TDS Sensor is an Arduino-compatible kit for measuring Total Dissolved Solids (TDS) in water. TDS indicates how many milligrams of soluble solids are dissolved per litre — the higher the value, the l...

SKU: WS-24370 | Brand: Waveshare

The LC76G is a multi-GNSS positioning module that supports GPS, BeiDou (BDS), GLONASS, Galileo, and QZSS satellite systems. It allows multi-system combined or single-system independent positioning for fast, accurate l...

SKU: DF-SEN0257 | Brand: DFRobot

The Gravity Analog Water Pressure Sensor measures water or gas pressure and outputs a linear 0.5–4.5 V analogue signal proportional to the applied pressure (0–1.6 MPa). Using the DFRobot Gravity 3-pin interface, it co...

SKU: LB-24-ATMOS | Brand: Little Bird

A compact barometric pressure and temperature sensor module that communicates over I2C. Ideal for weather stations, altitude estimation, and environmental monitoring projects with micro:bit, Arduino, or other microcon...

SKU: DF-SEN0171 | Brand: DFRobot

A passive infrared (PIR) motion sensor from DFRobot's Gravity series. It detects infrared radiation from people and animals in motion and outputs a digital HIGH signal when movement is detected — ideal for security sy...

SKU: DF-TEL0094 | Brand: DFRobot

You must have used a GPS receiver. It is easy to be found in most places, such as smartphones, cars, and computers. They are used to track your loaction all over the globe. GPS Receiver for Arduino is a unit embed...

SKU: DF-SEN0311 | Brand: DFRobot

A commercial-grade waterproof ultrasonic distance sensor with UART serial output. The A02YYUW features a much smaller blind zone (3 cm) and wider sensing angle than many comparable sensors, plus penetration through sm...

SKU: DF-DFR0094 | Brand: DFRobot

Infrared devices are widely used, and often for remote controlled devices. With this IR receiver, your Arduino project is now able to receive command from any IR remote controller. Well, it will be also easy...

SKU: DF-DFR0129 | Brand: DFRobot

A capacitive touch sensor kit for Arduino based on the MPR121 touch controller. Includes three interchangeable touch pads — a scroll wheel, a keypad with backlight support, and a grid pad for gesture and pattern recog...

SKU: AF-189 | Brand: Adafruit

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...

SKU: SF-COM-09117 | Brand: SparkFun

This is a 12-step rotary encoder with a nice ‘clicking’ feel. It’s breadboard friendly, and has a pretty handy select switch (by pushing in on the knob). The encoder is different from a potentiometer in that an enc...

SKU: DF-DFR0315 | Brand: DFRobot

FEATURESAPPLICATIONSSPECIFICATIONSNote: It has been newest Model: A1M8 --2017/5/15 DOCUMENTS SLAMTEC Website Development Kit SDK & Datasheet Related Rplidar Review by Gavin (@MechatronicsGuy) ICP-SLAM based on Rob...

SKU: AF-3386 | Brand: Adafruit

The Adafruit PiRTC is a battery-backed real-time clock that plugs directly onto your Raspberry Pi's GPIO header, letting your Pi keep accurate time even when powered off. Built around the PCF8523 RTC with native Linux...

SKU: AF-377 | Brand: Adafruit

This high-quality 24-pulse rotary encoder features detented rotation with a satisfying click at each step, a built-in push-button switch, and a panel-mount design. It comes with a soft-touch knob with an arrow indicat...

SKU: DF-SEN0448 | Brand: DFRobot

A 4-wire slot-type photoelectric switch with integrated optical transmitter and receiver. The 5mm detection slot can detect objects passing through, including transparent materials, making it ideal for counting, posit...

SKU: DF-SEN0290 | Brand: DFRobot

Gravity: Lightning Sensor employs AMS innovative AS3935 Franklin lightning sensor IC and Coilcraft MA5532-AE dedicated antenna to detect lightning distance, intensity, and frequency within a radius of 40km both indoor...