Sensors
Browse our extensive range of sensor modules and breakout boards, covering temperature, distance, motion, touch, liquid level, radar, infrared, and more. Whether you're building with Arduino, Raspberry Pi, or your own custom PCB, you'll find the right sensor for your project.
Popular with Australian makers, students, and engineers for robotics, home automation, environmental monitoring, and STEM education. Fast shipping Australia-wide from our local warehouse.
Adafruit Ultimate GPS Breakout - 66 channel w/10 Hz updates [Version 3]
SKU: AF-746 | Brand: Adafruit
The Adafruit Ultimate GPS Breakout (Version 3) is a high-performance GPS module built around the MTK3339 chipset. With 66 channels, -165 dBm tracking sensitivity, and up to 10 Hz position updates, it delivers accurate...
Delivered by Thu 1 Oct
Gravity: HUSKYLENS 2 - 6 TOPS LLM MCP AI Vision Sensor (20+ Models, Deploy Custom Models)
SKU: DF-SEN0638 | Brand: DFRobot
HUSKYLENS 2 is a powerful AI vision sensor with a 1.6GHz dual-core processor and 6 TOPS AI accelerator. With 20+ built-in AI models and the ability to train and deploy custom YOLO models, it brings advanced computer v...
Delivered by Thu 1 Oct
Adafruit Ultimate GPS Breakout with GLONASS + GPS - PA1616D
SKU: AF-5440 | Brand: Adafruit
The Adafruit Ultimate GPS Breakout with GLONASS + GPS is an enhanced version of the popular Ultimate GPS, built around the MTK3333 chipset with PA1616D module. It supports both GPS and GLONASS satellite networks, trac...
Delivered by Thu 1 Oct
Maxbotix Ultrasonic Rangefinder - LV-EZ0 [LV-EZ0]
SKU: AF-979 | Brand: Adafruit
The LV-EZ0 from MaxBotix is a compact ultrasonic rangefinder providing short to long-range detection. It can detect objects from 0 to 254 inches (6.45 m) and provides calibrated range information from 6 inches out to ...
Delivered by Thu 1 Oct
PN532 NFC/RFID controller breakout board [v1.6]
SKU: AF-364 | Brand: Adafruit
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...
Delivered by Thu 1 Oct
ESP8266 ESP-01/ESP-01S DHT11 Temperature Humidity WiFi NodeMCU Module for Arduino
SKU: EC-ESP82003S | Brand: Elecrow
A compact sensor shield that pairs with an ESP8266 ESP-01 or ESP-01S module to monitor temperature and humidity over WiFi. The onboard DHT11 sensor captures environmental data, which the ESP8266 processes and uploads ...
Delivered by Thu 1 Oct
RFID Reader ID-12LA (125 kHz)
SKU: SF-SEN-11827 | Brand: SparkFun
RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-12LA, a very simpl...
Delivered by Thu 1 Oct
Gravity: Laser PM2.5 Air Quality Sensor For Arduino
SKU: DF-SEN0177 | Brand: DFRobot
The Gravity Laser PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter concentrations in the air. It detects particles from 0.3 to 10 µm in diameter and outputs digital concentration ...
Delivered by Thu 1 Oct
Fermion: GR10-30 Gesture Sensor (Breakout, UART & I2C, 12 Gestures, 0~30cm)
SKU: DF-SEN0543 | Brand: DFRobot
This GR10-30 gesture sensor is capable of recognizing 12 hand gestures: move up, down, left, right, forward & backward, rotate clockwise & counterclockwise, rotate clockwise & counterclockwise continuously, hover, and...
Delivered by Thu 1 Oct
SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic)
SKU: SF-GPS-15733 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it ca...
Delivered by Thu 1 Oct
SparkFun GPS Breakout - XA1110 (Qwiic)
SKU: SF-GPS-14414 | Brand: SparkFun
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...
Delivered by Thu 1 Oct
Air Quality Monitor (PM 2.5, Formaldehyde, Temperature Humidity Sensor)
SKU: DF-SEN0233 | Brand: DFRobot
A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemica...
Delivered by Thu 1 Oct
SparkFun GPS Breakout
SKU: SF-BOB-11818 | Brand: SparkFun
This is a more universal GPS breakout board that uses a vertical SMD connector which is perfect for the GP-735T GPS receiver that we sell. It features 2 mounting holes and through-hole connections for wires or headers...
Delivered by Thu 1 Oct
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared