Sensors & Modules

SKU: SF-SEN-09602 | Brand: SparkFun

The MPL115A1 is a digital barometer that uses MEMs technology to give accurate pressure measurements between 50kPa and 115kPa. We stock the SPI interface version of the sensor. Average current consumption is 10µA at o...

SKU: DF-SEN0221 | Brand: DFRobot

The Hall Angle Sensor is a miniature 360 degree sensor which works based on the principle of the Hall effect. It is compatible with the DFRobot Gravity sensor interface, and works with a 5V DC power supply. The ...

SKU: DF-DFR0058 | Brand: DFRobot

This Arduino Rotation Potentimeter Sensor is a multi-ring rotation sensor. It is based on multi-turn precision potentiometer. It can rotate upto 10 laps. The voltage can be subdivided into 1024 copies. This sens...

SKU: DF-SEN0019 | Brand: DFRobot

This is an Arduino infrared distance sensor. It has an adjustable detection range, 3cm - 80cm. It is small, easy to use, assemble, and inexpensive. Useful for robotics, interactive media, industrial assembly line,...

SKU: DF-DFR0027 | Brand: DFRobot

What's the simplest way to check vibration with Arduino? Use a vibration sensor from DFRobot. You can directly plug it on our IO Expesion Shield V7. Just vibrate this sensor, Arduino can receive a digital signal. It'...

SKU: DF-SEN0231 | Brand: DFRobot

The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in a...

SKU: DF-SEN0007 | Brand: DFRobot

The SRF08 is an evolutionary step up from the SRF04. It requires less power to operate, has a longer range (up to 6m) and it performs its own internal timing of the return echo. The SRF08 is also fitted with an LDR...

SKU: DF-DFR0072 | Brand: DFRobot

At sometime or another you may run out of pins on your Arduino board and need to extend it with shift registers.  With this shift out module which is based on 74HC595. The datasheet refers to the 74HC595 as an "8...

SKU: SF-SEN-09416 | Brand: SparkFun

This is a glass, cylindrical RFID tag; it’s very similar to those implanted into pets for identification purposes. But really guys, it’s not for use inside your body. Please don’t implant this thing into yourselves. E...

SKU: AF-3538 | Brand: Adafruit

Add heat-vision to your project with the Adafruit AMG8833 Grid-EYE Breakout. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings over I2C — like...

SKU: SF-SEN-09403 | Brand: SparkFun

This is a simple-to-use Carbon Monoxide (CO) sensor, suitable for sensing CO concentrations in the air. The MQ-7 can detect CO-gas concentrations anywhere from 20 to 2000ppm. This sensor has a high sensitivity and f...

SKU: AF-904 | Brand: Adafruit

This breakout board will solve all your power-monitoring problems. Instead of struggling with two multimeters, you can just use the handy INA219B chip on this breakout to both measure both the high side voltage and DC...

SKU: DF-SEN0238 | Brand: DFRobot

DE-LIDAR TF01 is a unidirectional laser rangefinder, which based on ToF (Time of Flight) technology. It is comprised of particular optical and electrical devices that makes it stable, high sensitivity and high pre...

SKU: AF-3622 | Brand: Adafruit

Add heat-vision to any Feather board with the Adafruit AMG8833 Thermal Camera FeatherWing. This sensor from Panasonic contains an 8×8 array of infrared thermal sensors that returns 64 individual temperature readings o...

SKU: ON-SERVOEXP | Brand: Little Bird

Add 16 independent PWM outputs to your Onion Omega2 for controlling servos, DC motors, and LED brightness. The onboard 3-pin connectors let you plug in standard servos directly – no breadboard or extra wiring needed. ...

SKU: AF-6477 | Brand: Adafruit

This breakout makes the AS7343 multi-channel spectrometer easy to add to your project. Instead of only measuring overall brightness, it can quantify how much light is present across different wavelengths, letting you ...

SKU: AF-5810 | Brand: Adafruit

This breakout combines Vishay's VCNL4020 proximity sensor and ambient light sensor on one compact I2C board, making it a handy choice when you want to detect nearby objects and measure light levels at the same time. T...

SKU: AF-6498 | Brand: Adafruit

Measure ambient light in real lux with a sensor that handles everything from very dim conditions to bright outdoor sunlight. This breakout is built around the MAX44009, an easy-to-use ambient light sensor that automat...

SKU: AF-6388 | Brand: Adafruit

This compact breakout makes it easy to measure magnetic fields in three axes for compass, navigation and orientation projects. It is built around the QMC5883P, a magnetometer commonly used in quadcopter and robotics d...

SKU: AF-6479 | Brand: Adafruit

This breakout brings ambient light tri-stimulus colour sensing to your project using CIE XYZ plus an IR channel, rather than the more common RGB-style approach. It is designed for applications where you want access to...