Sensors & Modules
Explore a broad range of sensors and modules for electronics projects, from temperature and distance sensors to IMUs, relay modules, ADC breakouts, and liquid level sensors. Whether you're building a weather station, robotics project, or home automation system, you'll find the right component here.
Popular with Australian hobbyists, STEM educators, and professional makers, these modules work with Arduino, Raspberry Pi, and other common platforms. Fast shipping across Australia to get your project moving.
Gravity: I2C RGB LED Colorful Button Module
SKU: DF-DFR0991 | Brand: DFRobot
This is an I2C button module with RGB LED. The module not only supports reading button status like conventional ones, but also controlling RGB LED color and switching on/off the light independently, which could create...
Delivered by Mon 24 Aug
Indoor ENS160 Air Quality Sensor - I2C
SKU: DF-SEN0537 | Brand: DFRobot
The ENS160 Air Quality Sensor uses ScioSense's ENS160 chip with TrueVOC and metal oxide (MOX) technology to monitor indoor air quality. It outputs TVOC (total volatile organic compounds), eCO2 (equivalent CO2), and AQ...
Delivered by Mon 24 Aug
Gravity: UART Fiber Optic Transceiver Module
SKU: DF-TEL0153 | Brand: DFRobot
Still make do with the hard and thick shielded twisted pair for remote signal-transmitting? And even drop the baud rate again and again just for transmission stability? Now get rid of these problems by using this Grav...
Delivered by Mon 24 Aug
SparkFun PIR Breakout Starter Kit (1uA)
SKU: SF-KIT-19518 | Brand: SparkFun
The SparkFun PIR Breakout Starter Kit includes everything needed to get started with passive infrared motion detection. Built around the Panasonic EKMB1107112 PIR sensor, this kit's breakout board offers ultra-low 1µA...
Delivered by Mon 24 Aug
Adafruit LSM6DS3TR-C + LIS3MDL - Precision 9 DoF IMU
SKU: AF-5543 | Brand: Adafruit
The Adafruit LSM6DS3TR-C + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It pairs the LSM6DS3TR-C accelerometer/gyroscope with the LIS3MDL magnetometer — prov...
Delivered by Fri 4 Sep
Single Li-Ion and LiPoly Battery Power Meter
SKU: AF-5383 | Brand: Adafruit
This small, palm-sized battery power meter has a small display that shows off how much juice is left in your single Lithium Ion/Polymer rechargeable battery. The color display has four levels of power indication once ...
Delivered by Thu 13 Aug
Gravity: Electrochemical Oxygen Sensor (0-100%Vol) - I2C
SKU: DF-SEN0496 | Brand: DFRobot
This full-scale oxygen sensor uses an original AO2 CiTiceL electrochemical probe to measure oxygen concentrations from 0–100%Vol via I2C digital output. A built-in calibration algorithm on the signal board supports si...
Delivered by Mon 24 Aug
MyoWare 2.0 Arduino Shield
SKU: SF-DEV-18426 | Brand: SparkFun
The MyoWare® 2.0 Arduino Shield is designed to easily connect up to six MyoWare 2.0 Muscle Sensors and Link Shields using 3.5mm TRS-to-TRS audio cables. The board comes pre-populated with male headers so all you would...
Delivered by Mon 24 Aug
MyoWare 2.0 Reference Cable
SKU: SF-CAB-19244 | Brand: SparkFun
The MyoWare 2.0 Reference Cable extends the reference pin on the MyoWare 2.0 Muscle Sensor, allowing you to place the reference electrode on a separate part of the body. This is useful when the sensor's built-in refer...
Delivered by Mon 24 Aug
Gravity: ENS160 Air Quality Sensor
SKU: DF-SEN0514 | Brand: DFRobot
This Gravity: ENS160 Air Quality Sensor, based on ScioSense's new ENS160 sensor chip, is specifically designed for indoor air quality monitoring and offers detection of multiple IAQ data (TVOC, eCO2, AQI).The innovati...
Delivered by Thu 13 Aug
Gravity: CO Sensor (Calibrated) - I2C & UART
SKU: DF-SEN0466 | Brand: DFRobot
This is a sensor that detects carbon monoxide and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of carbon ...
Delivered by Mon 24 Aug
GPS Module - GP1818MK (56 Channel)
SKU: SF-GPS-19166 | Brand: SparkFun
The GP-1818MK is a low-cost - high performance GPS module with built in antenna. It can provide position, velocity, and accurate timing through the standard NMEA-0183 protocol. Being low power and compact in design, t...
Delivered by Mon 24 Aug
Industrial 4-Channel Relay Module
SKU: DF-FIT0827 | Brand: DFRobot
The module adopts the standard Modbus RTU protocol, the communication interface supports RS485 or RS232 and supports communication baud rates of 2400, 4800, 9600, 19200, 38400 (default 9600). Each relay output is inde...
Delivered by Thu 13 Aug
RS485 Wind Speed Transmitter
SKU: DF-SEN0483 | Brand: DFRobot
This wind speed sensor is a professional meteorological instrument used to measure horizontal wind speed within 0~32.4m/s. It integrates a hall sensor inside. The shell and wind cups are made of aluminum alloy materia...
Delivered by Mon 24 Aug
Ring Inductive Proximity Sensor (15mm Hole Diameter)
SKU: DF-FIT0762 | Brand: DFRobot
These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...
Delivered by Mon 24 Aug
Gravity: I2C H3LIS200DL Triple Axis Accelerometer Sensor (±100g/±200g)
SKU: DF-SEN0412 | Brand: DFRobot
The H3LIS200DL is a high-performance triple-axis linear accelerometer with an ultra-low power consumption of 10uA. It offers user-selectable scales of ±100g/±200g and is capable of measuring accelerations with output ...
Delivered by Mon 24 Aug
Fermion: VL6180X ToF Distance Ranging Sensor (5-100mm) (Breakout)
SKU: DF-SEN0427 | Brand: DFRobot
The STMicroelectronics VL6180X Time of Flight Ranging Sensor embeds ST’s patented FlightSense™technology that allows distance to be accurately measured independent of target reflectance. The sensor is rated to perform...
Delivered by Mon 24 Aug
Gravity: Serial Data Logger for Arduino
SKU: DF-TEL0147 | Brand: DFRobot
Compared to the old MicroSD Card Module, this Gravity: Serial Data Logger can store data more conveniently, and supports direct data printing through serial port without additional codes.The Serial Data Logger provide...
Delivered by Mon 24 Aug
Gravity: I2C LIS331HH Triple Axis Accelerometer Sensor (±6g/±12g/±24g)
SKU: DF-SEN0411 | Brand: DFRobot
The Gravity: LIS331HH is a high-performance 3-axis linear accelerometer with ultra-low power consumption of just 10 µA in low-power mode. It offers user-selectable measurement ranges of ±6g, ±12g, or ±24g and delivers...
Delivered by Thu 13 Aug
Gravity: 5V Non-contact Liquid Level Sensor
SKU: DF-SEN0485 | Brand: DFRobot
This small 5V non-contact liquid level sensor with Gravity Interface is able to detect 0-100°C conductive liquid levels in non-metallic containers in sensing range of 3mm. Provided with digital quantity output(low), t...
Delivered by Thu 13 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
