Sensors & Modules

SKU: AF-2748 | Brand: Adafruit

The Adafruit ALS-PT19 is a compact analog light sensor that provides a simple voltage output proportional to ambient light intensity. Its spectral response closely matches that of the human eye, thanks to a high infra...

SKU: SF-SEN-08680 | Brand: SparkFun

These are very thin variable potentiometers. By pressing down on various parts of the strip, the resistance linearly changes from 100Ohms to 10,000Ohms allowing the user to very accurately calculate the relative posit...

SKU: SF-SEN-00250 | Brand: SparkFun

10K thermistor with a negative temperature coefficient. Good choice for temp-sensing applications when you need a reliable NTC thermistor. Vishay part #: NTCLE100E3103JB0 Note: You get only one thermistor. Document...

SKU: DF-DFR0055 | Brand: DFRobot

This is universal sensor adapter V2.0, it can be accessed by digital input modules and analog input module. The module with Arduino sensor expansion board, in combination.Improvment compare with the old version,we a...

SKU: DF-SEN0160 | Brand: DFRobot

A digital weight sensor kit based on the HX711 24-bit ADC, capable of measuring up to 1 kg. The HX711 is designed specifically for weight scale applications, interfacing directly with a bridge sensor to deliver precis...

SKU: DF-SEN0134 | Brand: DFRobot

The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO a...

SKU: AF-245 | Brand: Adafruit

The 2-Axis Joystick provides analogue input for your projects using two independent 10K potentiometers — one per axis. It reports position as either voltage or resistance, making it compatible with a wide range of mic...

SKU: SF-SEN-13332 | Brand: SparkFun

This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in res...

SKU: DF-KIT0011 | Brand: DFRobot

INTRODUCTION If you want to start playing with sensors, this sensor kit for arduino will be the perfect choice for you to get started. It comes with bundle of the most popular DFRobot sensors...

SKU: AF-381 | Brand: Adafruit

This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...

SKU: DF-DFR0075 | Brand: DFRobot

This keyboard uses an analog input to read the five key state which saves IO resource for the Arduino. It can be used together with our I/O expansion boards to make amazing interactive project. SPECIFICATIONS ...

SKU: AF-3316 | Brand: Adafruit

The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light senso...

SKU: SF-WRL-12775 | Brand: SparkFun

This is the SparkFun RFM69 Breakout, a small piece of tech that breaks out all the pins available on the RFM69HCW module as well as making the transceiver easy to use. The RFM69HCW is an inexpensive and versatile r...

SKU: SF-SEN-09836 | Brand: SparkFun

This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital...

SKU: SF-SEN-09673 | Brand: SparkFun

A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...

SKU: SF-SEN-09570 | Brand: SparkFun

Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge numb...

SKU: DF-DFR0065 | Brand: DFRobot

This is a basic breakout board for the FTDI FT232RL USB to serial IC. The pinout of this board matches the FTDI cable to work with official Arduino and cloned 3.3V Arduino boards. It can also be used for gene...

SKU: DF-SEN0214 | Brand: DFRobot

The Gravity Analog 20A Current Sensor measures both AC and DC current using the Hall effect, outputting a proportional analog voltage to your microcontroller. With high-voltage isolation built into the circuit design ...

SKU: AF-3595 | Brand: Adafruit

The Adafruit APDS9960 is a multi-function sensor that combines proximity detection, ambient light sensing, RGB colour sensing and gesture recognition in a single I2C breakout. It uses an integrated IR LED and four dir...

SKU: DF-DFR0627 | Brand: DFRobot

The Gravity IIC to Dual UART Module converts a single I2C connection into two independent hardware serial ports. Each sub-UART has its own 256-byte FIFO buffer for transmitting and receiving, with individually configu...