Sensors & Modules

SKU: SF-SEN-18345 | Brand: SparkFun

The SparkFun SGP40 Air Quality Sensor measures volatile organic compound (VOC) levels in indoor environments using Sensirion's CMOSens technology. The metal oxide (MOx) sensor with a temperature-controlled micro hotpl...

SKU: AF-4821 | Brand: Adafruit

The Adafruit TMP117 is a high-accuracy I2C temperature sensor from Texas Instruments, offering 16-bit resolution (0.0078°C) and up to ±0.1°C accuracy across the most common temperature ranges. It's ideal for applicati...

SKU: AF-4829 | Brand: Adafruit

The Adafruit SGP40 is a next-generation MOX (metal-oxide) gas sensor from Sensirion for indoor air quality monitoring. Unlike its predecessor the SGP30, the SGP40 outputs a raw signal that is processed through Sensiri...

SKU: SF-DEV-17047 | Brand: SparkFun

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...

SKU: AF-4692 | Brand: Adafruit

The Adafruit LSM6DSO32 is a 6 Degree of Freedom (6-DoF) IMU featuring a triple-axis accelerometer with an extended ±32g range and a triple-axis gyroscope. It shares the same pinout and firmware compatibility as the LS...

SKU: SF-SEN-16476 | Brand: SparkFun

The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's MPR Series piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a wide pressure sensing range of 60mbar to ...

SKU: SF-SEN-16295 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-SEN-16466 | Brand: SparkFun

A complete environmental sensor breakout based on the Bosch BME680, combining gas sensing (VOC), temperature, humidity, and barometric pressure in a compact 25.4 × 25.4mm (1" × 1") board. The gas sensor detects a wide...

SKU: AF-4415 | Brand: Adafruit

The Adafruit Mini GPS PA1010D is a compact 25×25 mm GPS/GNSS breakout with a built-in patch antenna, dual UART and I2C interfaces, and STEMMA QT connectors for solderless plug-and-play use. Powered by the MTK3333 chip...

SKU: AF-6413 | Brand: Adafruit

The BMP585 from Bosch is a ported barometric pressure and temperature sensor featuring a tube attachment point for differential or remote pressure measurements. It delivers exceptional precision with altitude noise as...

SKU: SF-SEN-29211 | Brand: SparkFun

The SparkFun VEML7700 Qwiic Ambient Light Sensor provides accurate 16-bit light readings from 0 to 167,000 lux via I2C. The sensor features Vishay's Filtron™ technology for human-eye-like response and ultra-low power ...

SKU: SF-SEN-24540 | Brand: SparkFun

Forget ultrasonic and infrared sensors; the SparkFun Qwiic Pulsed Coherent Radar Sensor - Acconeer XM125 brings powerful 60 GHz radar technology to your projects. This sensor isn't limited to surface detection; it c...

SKU: SF-SEN-23880 | Brand: SparkFun

The SparkFun TMAG5273 Linear 3D Hall-Effect Sensor is a low-power, high-precision magnetic field sensor that detects the presence, strength, and direction of magnetic fields in three dimensions. Built on a standard 25...

SKU: SF-SEN-22494 | Brand: SparkFun

The STHS34PF80 sensor, from ST Microelectronics, is designed to measure the precise black-body radiation (as described by Planck's law) of an object; as well as monitor ambient temperature conditions within its 80° fi...

SKU: AF-5744 | Brand: Adafruit

The Tiny Code Reader from Useful Sensors is a small, low-cost hardware module that reads QR codes. It's designed to be a simple way to provision a system, for example, by providing the Wi-Fi network name and password ...

SKU: SF-SEN-21325 | Brand: SparkFun

Looking for an extremely accurate way to detect motion utilizing AI? We've got you covered with the Qwiic-enabled, SparkFun LSM6DSV16X 6DoF IMU Breakout. The LSM6DSV16X, from STMicroelectronics, is a high-performance,...

SKU: AF-5651 | Brand: Adafruit

An I2C breakout board for the RDA5807M FM radio chip, designed by ScoutMakes as a beginner-friendly introduction to electronics and wireless communications. Tune into FM stations, display RDS data (station and song na...

SKU: SF-SEN-19895 | Brand: SparkFun

The SparkFun 9DoF IMU Breakout combines the high-performance ISM330DHCX 3D accelerometer and gyroscope from STMicroelectronics with the MMC5983MA triple-axis magnetometer from MEMSIC, delivering nine degrees of freedo...

SKU: SF-KIT-19518 | Brand: SparkFun

The SparkFun PIR Breakout Starter Kit includes everything needed to get started with passive infrared motion detection. Built around the Panasonic EKMB1107112 PIR sensor, this kit's breakout board offers ultra-low 1µA...

SKU: AF-5543 | Brand: Adafruit

The Adafruit LSM6DS3TR-C + LIS3MDL is a precision 9 Degree of Freedom (9-DoF) inertial measurement unit on a single breakout board. It pairs the LSM6DS3TR-C accelerometer/gyroscope with the LIS3MDL magnetometer — prov...