Sensors & Modules

SKU: AF-5959 | Brand: Adafruit

The Adafruit S-35710 Wake Up Timer Breakout is an ultra-low-power watchdog timer that can be programmed to trigger an alarm from 1 second up to 194 days, using a 24-bit second counter. Drawing only 0.2 µA, it's an int...

SKU: SF-SEN-23715 | Brand: SparkFun

The SEN55 environmental node is a straightforward, all-in-one sensor solution platform for the accurate measurement of various environmental parameters, such as particulate matter, volatile organic compounds (VOCs), o...

SKU: SF-SEN-24048 | Brand: SparkFun

A line follower sensor gives your robot the ability to detect lines or nearby objects. The sensor works by detecting reflected light coming from its own infrared LED. By measuring the amount of reflected infrared ligh...

SKU: EF-EF05021 | Brand: ElecFreaks

The UV sensor is able to measure the total ultraviolet intensity of sunlight. You can use it to sense ozone and pollutants or make fire safety devices.

SKU: DF-SEN0577 | Brand: DFRobot

An industrial-grade single-line 2D pulsed Time-of-Flight (ToF) LiDAR scanner with 270° horizontal field of view and up to 25 m detection range. Compact, lightweight, and IP65-rated for both indoor and outdoor use. Fe...

SKU: DF-SEN0579 | Brand: DFRobot

This CS20 Dual-Resolution 3D TOF Solid-state LiDAR is equipped with a ToF image sensor with a resolution of 640*480 and uses ToF technology to capture three-dimensional information of objects and space. It can accu...

SKU: DF-SEN0537 | Brand: DFRobot

The ENS160 Air Quality Sensor uses ScioSense's ENS160 chip with TrueVOC and metal oxide (MOX) technology to monitor indoor air quality. It outputs TVOC (total volatile organic compounds), eCO2 (equivalent CO2), and AQ...

SKU: DF-SEN0496 | Brand: DFRobot

This full-scale oxygen sensor uses an original AO2 CiTiceL electrochemical probe to measure oxygen concentrations from 0–100%Vol via I2C digital output. A built-in calibration algorithm on the signal board supports si...

SKU: DF-SEN0514 | Brand: DFRobot

This Gravity: ENS160 Air Quality Sensor, based on ScioSense's new ENS160 sensor chip, is specifically designed for indoor air quality monitoring and offers detection of multiple IAQ data (TVOC, eCO2, AQI).The innovati...

SKU: DF-SEN0466 | Brand: DFRobot

This is a sensor that detects carbon monoxide and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of carbon ...

SKU: DF-SEN0483 | Brand: DFRobot

This wind speed sensor is a professional meteorological instrument used to measure horizontal wind speed within 0~32.4m/s. It integrates a hall sensor inside. The shell and wind cups are made of aluminum alloy materia...

SKU: DF-FIT0762 | Brand: DFRobot

These Inductive Ring Proximity sensors are designed to detect metal objects entering or passing through the ring. They operate on a 6-36V power supply and offer NPN output. The sensor features less than 1ms response t...

SKU: DF-SEN0512 | Brand: DFRobot

This scanning module reads barcodes or 2D codes with a scan speed of 15m/min. With small size and high-efficiency recognition, it is easy to be integrated into various industrial equipment and applications. The mod...

SKU: DF-TEL0132 | Brand: DFRobot

A compact multi-constellation GNSS positioning module based on the AT6558 chip with 32 tracking channels. It simultaneously receives signals from six satellite navigation systems: GPS, BeiDou, GLONASS, Galileo, QZSS, ...

SKU: DF-DFR0809 | Brand: DFRobot

The ESP32-C3-MINI-1-N4 is a compact Wi-Fi and Bluetooth Low Energy module from Espressif, built around the ESP32-C3FN4 chip with a 32-bit RISC-V single-core processor running at up to 160 MHz. It includes 4 MB of embe...

SKU: AF-5182 | Brand: Adafruit

The AM2315C is an enclosed I2C temperature and humidity sensor featuring the modern AHT20 sensor inside a rugged housing with mounting bracket. It offers the same convenient form factor as the original AM2315 but with...

SKU: AF-4534 | Brand: Adafruit

The Bonsai Buckaroo is a compact add-on board for micro:bit and Adafruit CLUE that turns your board into a plant care monitoring and watering system. Bolt it on with 5 screws to get a buzzer, motor driver, and soil mo...

SKU: AF-3575 | Brand: Adafruit

The Adafruit Touch Screen Breakout Board provides a simple way to connect a 4-wire resistive touch panel with a 1.0mm pitch FPC connector to your project. The connector is soldered onto a compact breakout board, with ...

SKU: DF-SEN0460 | Brand: DFRobot

The Gravity PM2.5 Air Quality Sensor uses laser scattering to measure suspended particulate matter in three size ranges — PM1.0, PM2.5, and PM10 — and outputs concentration data via I2C. With a minimum detectable part...

SKU: DF-SEN0433 | Brand: DFRobot

A digital vibration sensor module that detects vibration using an internal inductance coil. When vibration is detected, the module outputs a LOW signal and its on-board LED indicator lights up. Sensitivity is adjustab...