Sensors & Modules
Explore a broad range of sensors and modules for electronics projects, from temperature and distance sensors to IMUs, relay modules, ADC breakouts, and liquid level sensors. Whether you're building a weather station, robotics project, or home automation system, you'll find the right component here.
Popular with Australian hobbyists, STEM educators, and professional makers, these modules work with Arduino, Raspberry Pi, and other common platforms. Fast shipping across Australia to get your project moving.
SparkFun DeadOn RTC Breakout - DS3234
SKU: SF-BOB-10160 | Brand: SparkFun
Here is a real time clock based on the DS3234 Real Time Clock IC. The DS3234 is a low-cost, extremely accurate SPI bus real-time clock with an integrated temperature-compensated crystal oscillator and crystal. Th...
Delivered by Fri 12 Jun
ESP32(ESP-WROOM-32) WiFi Bluetooth Dual-Core MCU Module
SKU: DF-TEL0111 | Brand: DFRobot
INTRODUCTION The ESP32 WiFi and Bluetooth chip is the latest generation of Espressif products. It has a dual-core 32-bit MCU, which integrates WiFi HT40 and Bluetooth/BLE 4.2 technology inside. Compare...
Delivered by Tue 23 Jun
IR Thermal Imaging Camera Module – 80x62, Motion Detection, SPI/I2C, Raspberry Pi Compatible, 44° FOV
SKU: WS-31940 | Brand: Waveshare
Elevate your technological projects with our cutting-edge Long-wave IR Thermal Imaging Camera Module. Designed for seamless integration with Raspberry Pi and other development boards, this module is an ideal addition ...
Delivered by Fri 3 Jul
Thermal Imaging Camera Module LWIR – 80x62, SPI/I2C, Raspberry Pi Compatible, 90° FOV
SKU: WS-31941 | Brand: Waveshare
Elevate your technological projects with our cutting-edge Long-wave IR Thermal Imaging Camera Module. Designed for seamless integration with Raspberry Pi and other development boards, this module is an ideal addition ...
Delivered by Fri 3 Jul
Gravity: BME688 AI Environmental Sensor (VOC, Temperature, Humidity, Pressure)
SKU: DF-SEN0617 | Brand: DFRobot
The Gravity BME688 is an advanced MEMS environmental sensor from Bosch that measures temperature, humidity, barometric pressure, and volatile organic compounds (VOC) in a single compact module. It supports both I²C an...
Delivered by Tue 23 Jun
ESP32-C6 MINI Module - 4MB (PCB Antenna)
SKU: SF-WRL-24807 | Brand: SparkFun
The ESP32-C6 MINI is Espressif's compact WiFi 6 module integrating 2.4GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) into a single package with an on-board PCB antenna. Built around a hi...
Delivered by Fri 12 Jun
ESP32-C6 WROOM Module - 16MB (PCB Antenna)
SKU: SF-WRL-24806 | Brand: SparkFun
The ESP32-C6-WROOM-1 is Espressif's first Wi-Fi 6 module, integrating 2.4 GHz Wi-Fi 6 (802.11ax), Bluetooth 5.3 (LE), and IEEE 802.15.4 (Thread/Zigbee) on a single chip. Built around a high-performance 32-bit RISC-V c...
Delivered by Tue 23 Jun
Adafruit TSC2046 SPI Resistive Touch Screen Controller
SKU: AF-5767 | Brand: Adafruit
The Adafruit TSC2046 is an SPI resistive touch screen controller that offloads touch reading from your microcontroller. Instead of tying up analog pins and constantly polling, the TSC2046 handles all touch sensing ove...
Delivered by Thu 2 Jul
ESP32-H2-MINI-1 Module - 4MB Flash
SKU: AF-5716 | Brand: Adafruit
Coming soon! ESP32-H2-MINI-1 is a powerful, generic Bluetooth® Low Energy and IEEE 802.15.4 combo module that has a rich set of peripherals. This module is an ideal choice for a wide variety of application scenari...
Delivered by Thu 2 Jul
Nicla Voice
SKU: SF-SEN-21219 | Brand: SparkFun
The 22.86 x 22.86mm Nicla Voice allows for easy implementation of always-on speech recognition on the edge, because it integrates Syntiant’s powerful NDP120 Neural Decision processor to run multiple AI algorithms, ...
Delivered by Tue 23 Jun
FLiR Lepton Breakout Board V2
SKU: SF-BOB-16912 | Brand: SparkFun
The FLIR Lepton® Thermal Camera Breakout Board is an easy-to-interface evaluation board to quickly connect the FLIR Lepton camera module to common platforms like Raspberry Pi or custom hardware. It provides onboard po...
Delivered by Tue 23 Jun
SparkFun MicroMod GNSS Function Board - NEO-M9N
SKU: SF-GPS-18378 | Brand: SparkFun
The SparkFun MicroMod GNSS Function Board features a u-blox NEO-M9N 92-channel GNSS receiver, supporting concurrent reception of GPS, GLONASS, Galileo, and BeiDou constellations with approximately 1.5 m horizontal acc...
Delivered by Tue 23 Jun
SparkFun MicroMod GNSS Function Board - ZED-F9P
SKU: SF-GPS-19663 | Brand: SparkFun
With GNSS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GNSS Real Time Kinematics (RTK) has mastered d...
Delivered by Tue 23 Jun
SparkFun 6DoF IMU Breakout - ISM330DHCX (Qwiic)
SKU: SF-SEN-19764 | Brand: SparkFun
A Qwiic-compatible breakout board for the STMicroelectronics ISM330DHCX — a high-performance 3D accelerometer and 3D gyroscope designed for industrial applications. The 1" × 1" board communicates over I2C via the Qwii...
Delivered by Tue 23 Jun
Fermion: I2C H3LIS200DL Triple Axis Accelerometer (Breakout) (±100g/±200g)
SKU: DF-SEN0408 | Brand: DFRobot
The Fermion H3LIS200DL is an ultra-low-power, low-noise triple-axis accelerometer with user-selectable full-scale ranges of ±100g and ±200g. Capable of measuring accelerations with output data rates from 0.5 Hz to 1 k...
Delivered by Tue 23 Jun
Fermion: DS3232 Precise RTC (Breakout)
SKU: DF-DFR0821 | Brand: DFRobot
A high-precision real-time clock (RTC) breakout board based on the DS3232 chip, featuring an integrated crystal resonator and temperature compensator. The DS3232 maintains accuracy of ±3.5ppm (±0.3 seconds/day) across...
Delivered by Tue 23 Jun
Fermion: ICG 20660L Accel+Gyro 6-Axis IMU Module (Breakout)
SKU: DF-SEN0443 | Brand: DFRobot
The ICG-20660L is a high-precision 6-axis IMU module that integrates a 3-axis accelerometer(±2/4/8/16g), a 3-axis gyroscope(±125/250/500dps), and on-chip 16-bit ADCs. With up to ±1% initial sensitivity and low noise(6...
Delivered by Tue 23 Jun
Fermion: BMP390L Digital Barometric Pressure Sensor (Breakout)
SKU: DF-SEN0423 | Brand: DFRobot
A high-precision digital barometric pressure sensor breakout based on the Bosch BMP390L. Designed for industrial-grade applications, it delivers exceptional temperature stability, low drift, and ultra-low power consum...
Delivered by Tue 23 Jun
ESP32-S2-WROVER-I Module with uFL - 4 MB flash and 2 MB PSRAM
SKU: AF-4760 | Brand: Adafruit
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth...
Delivered by Thu 2 Jul
Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board
SKU: AF-4535 | Brand: Adafruit
The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...
Delivered by Thu 2 Jul
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
