Sensors & Modules
Explore a broad range of sensors and modules for electronics projects, from temperature and distance sensors to IMUs, relay modules, ADC breakouts, and liquid level sensors. Whether you're building a weather station, robotics project, or home automation system, you'll find the right component here.
Popular with Australian hobbyists, STEM educators, and professional makers, these modules work with Arduino, Raspberry Pi, and other common platforms. Fast shipping across Australia to get your project moving.
Magnetic Contact Switch Sensor for Arduino
SKU: DF-SEN0481 | Brand: DFRobot
This magnetic switch (reed switch) consists of two magnetic reeds (usually composed of iron and nickel) sealed in a plastic case. The two magnetic reeds are overlapped but there is a small gap between them. When a sui...
Delivered by Mon 26 Oct
Gravity: I2C LIS2DW12 Triple Axis Accelerometer Sensor (±2g/±4g/±8g/±16g)
SKU: DF-SEN0409 | Brand: DFRobot
The LIS2DW12 is an ultra-low-power high-performance three-axis linear accelerometer. It has user-selectable full scales of ±2g/±4g/±8g/±16g and is capable of measuring accelerations with output data rates from 1.6 Hz ...
Delivered by Mon 26 Oct
Gravity: BMP388 Barometric Pressure Sensors
SKU: DF-SEN0251 | Brand: DFRobot
This new released BMP388 barometric pressure sensor by DFRobot is equipped with the functionality of temperature and pressure measurement. It supports Arduino code control. Compared with the earlier version of BMP180,...
Delivered by Mon 26 Oct
Fermion: 8-Bit Level Translator (Breakout)
SKU: DF-DFR0844 | Brand: DFRobot
After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy to be damaged because the level of the sensor and your controller are...
Delivered by Mon 26 Oct
Fermion: I2C H3LIS200DL Triple Axis Accelerometer (Breakout) (±100g/±200g)
SKU: DF-SEN0408 | Brand: DFRobot
The Fermion H3LIS200DL is an ultra-low-power, low-noise triple-axis accelerometer with user-selectable full-scale ranges of ±100g and ±200g. Capable of measuring accelerations with output data rates from 0.5 Hz to 1 k...
Delivered by Mon 26 Oct
Fermion: MEMS Gas Sensor - MiCS-5524 (Breakout)
SKU: DF-SEN0440 | Brand: DFRobot
A compact MEMS gas sensor breakout based on the MiCS-5524, capable of detecting concentrations of multiple gases including carbon monoxide (CO), methane (CH4), ethanol (C2H5OH), propane (C3H8), butane (C4H10), hydroge...
Delivered by Mon 26 Oct
Fermion: I2C LIS331HH Triple Axis Accelerometer (Breakout) (±6g/±12g/±24g)
SKU: DF-SEN0407 | Brand: DFRobot
The LIS331HH is an ultra-low-power high precision triple-axis linear accelerometer with 16-bit data output. It has user selectable full scales of ±6g/±12g/±24g and is capable of measuring accelerations with output dat...
Delivered by Mon 26 Oct
Fermion: SHT31-F Digital Temperature & Humidity Sensor (Breakout)
SKU: DF-SEN0332 | Brand: DFRobot
This Digital Temperature & Humidity Sensor Breakout Board is based upon the Sensirion SHT31-F sensor IC. Thanks to Sensirion’s CMOSens® technology, highly integrated capacitive humidity sensing components and band-gap...
Delivered by Mon 26 Oct
Fermion: 4-Bit Level Translator (Breakout)
SKU: DF-DFR0843 | Brand: DFRobot
After purchasing an open-source product that is not electrical level compatible, you may find that your sensor cannot work normally or even is easy to be damaged because the level of the sensor and your controller are...
Delivered by Mon 26 Oct
Fermion: BMP390L Digital Barometric Pressure Sensor (Breakout)
SKU: DF-SEN0423 | Brand: DFRobot
A high-precision digital barometric pressure sensor breakout based on the Bosch BMP390L. Designed for industrial-grade applications, it delivers exceptional temperature stability, low drift, and ultra-low power consum...
Delivered by Mon 26 Oct
Capacitive Liquid Level Sensor for Arduino
SKU: DF-SEN0507 | Brand: DFRobot
Different from our previous liquid level sensors, this capacitive liquid sensor can be used to detect high-viscosity and low-corrosive liquids, such as glue, lubricating oil, grease, ink, engine oil, powder and other ...
Delivered by Mon 26 Oct
2-Channel Level Converter (12V to 5V)
SKU: DF-DFR0912 | Brand: DFRobot
The 2-Channel Level Converter translates 12V signals down to 5V using optocoupler isolation, making it easy to interface industrial sensors and PLC signals with 5V microcontrollers like Arduino. It supports common ano...
Delivered by Mon 26 Oct
ESP32-S2-WROVER-I Module with uFL - 4 MB flash and 2 MB PSRAM
SKU: AF-4760 | Brand: Adafruit
The ESP8266 started a small revolution by bringing WiFi to a small and cheap package that also had enough processing power and enough pins to get small things done. Then the ESP32 came out with tons of pins, Bluetooth...
Delivered by Fri 6 Nov
Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier
SKU: AF-5165 | Brand: Adafruit
The Adafruit MCP9601 (MCP96L01) I2C Thermocouple Amplifier handles all the analogue complexity of thermocouple measurement over a simple I2C interface. Connect your thermocouple, wire up I2C (or use the solderless STE...
Delivered by Fri 6 Nov
Adafruit LED Glasses Driver - nRF52840 Sensor Board
SKU: AF-5217 | Brand: Adafruit
The Adafruit LED Glasses Driver is a slim, Bluetooth-enabled controller board built around the Nordic nRF52840 chipset. Originally designed to drive the Adafruit LED Glasses RGB LED matrix, it also works brilliantly a...
Delivered by Fri 6 Nov
Adafruit LPS25 Pressure Sensor - STEMMA QT / Qwiic
SKU: AF-4530 | Brand: Adafruit
The Adafruit LPS25 Pressure Sensor Breakout features the ST LPS25HB — an absolute barometric pressure sensor that measures atmospheric pressure from 260 to 1260 hPa. Use it for weather monitoring, altitude estimation,...
Delivered by Fri 6 Nov
Adafruit ICM-20649 Wide Range ±30g ±4000dps 6-DoF IMU
SKU: AF-4464 | Brand: Adafruit
The Adafruit ICM-20649 breakout features a wide-range 6-DoF IMU capable of measuring up to ±30g acceleration and ±4000°/s gyroscope rotation — roughly double the range of standard IMUs. When typical ±16g accelerometer...
Delivered by Thu 15 Oct
Adafruit HTS221 - Temperature & Humidity Sensor Breakout Board
SKU: AF-4535 | Brand: Adafruit
The Adafruit HTS221 is an affordable I²C/SPI temperature and humidity sensor breakout board from ST. It measures relative humidity from 0–100% RH with 3.5% accuracy (in the 20–80% range) and temperature from -40 to 12...
Delivered by Fri 6 Nov
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT
SKU: AF-5303 | Brand: Adafruit
The Adafruit ESP32-S2 Feather with BME280 is identical to the standard ESP32-S2 Feather but with an on-board BME280 temperature, humidity, and barometric pressure sensor at I2C address 0x77. This makes it an instant I...
Delivered by Fri 6 Nov
Optomax Digital Liquid Level Sensor
SKU: AF-3397 | Brand: Adafruit
The Optomax is an optical liquid level sensor that detects the presence or absence of almost any liquid — oil or water based. Inside the polysulfone housing, an infrared LED and matching phototransistor work together:...
Delivered by Fri 6 Nov
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
