Sensors & Modules

SKU: AF-4821 | Brand: Adafruit

The Adafruit TMP117 is a high-accuracy I2C temperature sensor from Texas Instruments, offering 16-bit resolution (0.0078°C) and up to ±0.1°C accuracy across the most common temperature ranges. It's ideal for applicati...

SKU: AF-4829 | Brand: Adafruit

The Adafruit SGP40 is a next-generation MOX (metal-oxide) gas sensor from Sensirion for indoor air quality monitoring. Unlike its predecessor the SGP30, the SGP40 outputs a raw signal that is processed through Sensiri...

SKU: SF-DEV-17047 | Brand: SparkFun

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...

SKU: EC-WWI8266ESP | Brand: Elecrow

This serial WiFi transceiver module is based on ESP8266 SoC.. ESP8266 is a highly integrated chip that has Integrated TCP/IP protocol stack. It offers a complete and self-contained Wi-Fi networking solution, allowing ...

SKU: DF-SEN0343 | Brand: DFRobot

This high-resolution differential pressure sensor with I2C communication is used to measure the difference in pressure across two points on a device. A high-performance MEMS pressure chip and a special conditioning ch...

SKU: AF-4692 | Brand: Adafruit

The Adafruit LSM6DSO32 is a 6 Degree of Freedom (6-DoF) IMU featuring a triple-axis accelerometer with an extended ±32g range and a triple-axis gyroscope. It shares the same pinout and firmware compatibility as the LS...

SKU: SF-SEN-16476 | Brand: SparkFun

The SparkFun Qwiic MicroPressure Sensor is a miniature breakout equipped with Honeywell's MPR Series piezoresistive silicon pressure sensor. This MicroPressure Sensor offers a wide pressure sensing range of 60mbar to ...

SKU: DF-SEN0315 | Brand: DFRobot

Build an awesome interactive project with this PAJ7620U2 Gesture Sensor! It is an interactive sensor with 3D gesture recognition that can recognize 13 gestures at most within 20cm. The sensor offers stable performance...

SKU: AF-4469 | Brand: Adafruit

The Adafruit MLX90640 IR Thermal Camera Breakout features a 24×32 array of infrared thermal sensors that returns 768 individual temperature readings over I2C. It's an affordable way to add heat-vision to any microcont...

SKU: SF-SEN-16295 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: LB-24-THERMISTOR | Brand: Little Bird

A thermistor changes its resistance with temperature. Find our tutorial here A thermistor is a type of variable resistor whose resistance changes with temperature. Let's take a closer look at the thermistor module....

SKU: SF-SEN-16466 | Brand: SparkFun

A complete environmental sensor breakout based on the Bosch BME680, combining gas sensing (VOC), temperature, humidity, and barometric pressure in a compact 25.4 × 25.4mm (1" × 1") board. The gas sensor detects a wide...

SKU: DF-DFR0588 | Brand: DFRobot

Gravity: Analog SHT30 Temperature & Humidity Sensor adopts the new generation SHT30 temperature and humidity sensor from Sensirion. Thanks to Sensirion's CMOSens® technology, highly integrated capacitive humidity sens...

SKU: AF-4415 | Brand: Adafruit

The Adafruit Mini GPS PA1010D is a compact 25×25 mm GPS/GNSS breakout with a built-in patch antenna, dual UART and I2C interfaces, and STEMMA QT connectors for solderless plug-and-play use. Powered by the MTK3333 chip...

SKU: SF-SEN-15569 | Brand: SparkFun

This is the HC-SR04 ultrasonic distance sensor. This economical sensor provides 2cm to 400cm of non-contact measurement functionality with a ranging accuracy that can reach up to 3mm. Each HC-SR04 module includes an u...

SKU: AF-4258 | Brand: Adafruit

The Adafruit LPS35HW is a water-resistant barometric pressure and temperature sensor from ST. The sensing element is housed in a ceramic package with waterproof gel protection, making it safe to use in damp and humid ...

SKU: AF-979 | Brand: Adafruit

The LV-EZ0 from MaxBotix is a compact ultrasonic rangefinder providing short to long-range detection. It can detect objects from 0 to 254 inches (6.45 m) and provides calibrated range information from 6 inches out to ...

SKU: SF-SEN-14520 | Brand: SparkFun

The SparkFun Capacitive Touch Breakout provides a single momentary touch button using the AT42QT1011 capacitive sense chip. Simply supply 1.8–5 V and ground — the chip handles all touch monitoring and outputs a digita...

SKU: SS-101020023 | Brand: Seeed Studio

The Sound sensor module is a simple microphone. Based on the power amplifier LM386 and the electret microphone, it can be used to detect the sound strength of the environment. The value of output can be adjusted b...

SKU: AF-2651 | Brand: Adafruit

The BMP280 from Bosch is a precision barometric pressure and temperature sensor, and the next-generation upgrade to the BMP085/BMP180/BMP183 family. With support for both I2C and SPI communication, it offers flexibili...