Sensors & Modules

SKU: LB-LR0214-73A | Brand: Little Bird

Secure your project with biometrics - this all-in-one optical fingerprint sensor will make adding fingerprint detection and verification super simple. These modules are typically used in safes - there's a high powered...

SKU: LB-LR0205 | Brand: Little Bird

An alcohol sensor module for Arduino with both digital (TTL) and analog output. It detects alcohol vapour in the 10–1000 PPM range, with analog output voltage increasing proportionally with concentration. The module a...

SKU: AF-1602 | Brand: Adafruit

Add lots of touch sensors to your next microcontroller project with this easy-to-use 8-channel capacitive touch sensor breakout board, starring the CAP1188. This chip can handle up to 8 individual touch pads, and has ...

SKU: AF-2340 | Brand: Adafruit

The Adafruit Capacitive Touch HAT adds 12 capacitive touch sensors to your Raspberry Pi using the MPR121 touch controller over I2C. Each sensor has a figure-8 hole designed for alligator clip connections — attach clip...

SKU: AF-2809 | Brand: Adafruit

The Adafruit LIS3DH is a popular, low-power triple-axis accelerometer breakout packed with features typically found only on higher-end sensors. With selectable measurement ranges, multiple interface options, and built...

SKU: SF-BOB-13878 | Brand: SparkFun

The SparkFun Load Sensor Combinator is a bare PCB that combines four load sensors into a standard four-wire Wheatstone bridge configuration. If you open up an electronic bathroom scale, you’ll find a large rat’s ne...

SKU: DF-SEN0159 | Brand: DFRobot

The Gravity CO2 Gas Sensor uses an MG-811 electrochemical sensing element to detect carbon dioxide concentration in the air. The output voltage decreases as CO2 concentration increases, and an onboard potentiometer le...

SKU: AF-3295 | Brand: Adafruit

Keep track of time even when your project loses power or gets reprogrammed. The PCF8523 Real Time Clock breakout is a battery-backed RTC that communicates over I2C and works with both 3.3 V and 5 V power and logic. Pe...

SKU: DF-SEN0211 | Brand: DFRobot

INTRODUCTION When you want to measure AC current it is impractical and hazardous to cut in to your live wiring. The analog AC current sensor developed by DFRobot is a good solution to this p...

SKU: DF-SEN0197 | Brand: DFRobot

The Gravity Voice Recorder Module is a compact board with integrated record and playback functions, based on the ISD1820 chip. Simply press the record button, speak into the onboard microphone, and release to save up ...

SKU: DF-SEN0224 | Brand: DFRobot

DFRobot presents the ultra low-power Arduino triple axis accelerometer! This device is based around a MEMS LIS2DH chip solution and has high-performance ultra-low power mode. The module is fitted with a Gravity I2...

SKU: LB-LS1177 | Brand: Little Bird

Laser Detector Module Want to set up your own laser tripwire? These little modules make it super simple. Just hook one up to your Arduino, line it up with a laser pointer, and you’ve got a working laser detection syst...

SKU: DF-SEN0636 | Brand: DFRobot

The Gravity UV Index Sensor measures ultraviolet radiation across the 240–370 nm wavelength range, covering UVA, UVB, and UVC bands. It directly outputs a UV index (0–11) and a harm risk level (1–5), eliminating the n...

SKU: DF-SEN0610 | Brand: DFRobot

##Introduction The Gravity: C4001 millimeter-wave presence sensor, operating at a wavelength signal of 24GHz, boasts a horizontal detection range of 100°, a presence detection range of 8 meters, and a motion detection...

SKU: AF-5913 | Brand: Adafruit

The Adafruit STEMMA Reflective Photo Interrupt Sensor uses a TCRT1000 right-angle optical module to detect reflective surfaces. An onboard IR LED emits light, and when an object reflects it back to the IR phototransis...

SKU: AF-5912 | Brand: Adafruit

The Adafruit SHT41 Trinkey is a tiny USB A device that combines an ATSAMD21 microcontroller with a Sensirion SHT41 temperature and humidity sensor. Simply plug it into any USB A port on your computer and start reading...

SKU: SF-SEN-22956 | Brand: SparkFun

The SparkFun Photoacoustic Spectroscopy CO2 Sensor features the Infineon XENSIV PAS CO2 (PASCO2V01) sensor, which delivers highly accurate CO2 measurements in direct parts-per-million (ppm) format. The photoacoustic s...

SKU: DF-SEN0467 | Brand: DFRobot

This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...

SKU: DF-SEN0570 | Brand: DFRobot

Fermion: MEMS Smoke Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal heat...

SKU: DF-SEN0571 | Brand: DFRobot

Fermion: MEMS Odor Smell Gas Detection Sensor employs state-of-the-art microelectromechanical system (MEMS) technology, endowing the sensor with compact dimensions (13x13x2.5mm), low power consumption (<20mA), minimal...