Sensors & Modules
Explore a broad range of sensors and modules for electronics projects, from temperature and distance sensors to IMUs, relay modules, ADC breakouts, and liquid level sensors. Whether you're building a weather station, robotics project, or home automation system, you'll find the right component here.
Popular with Australian hobbyists, STEM educators, and professional makers, these modules work with Arduino, Raspberry Pi, and other common platforms. Fast shipping across Australia to get your project moving.
SparkFun GPS Breakout - NEO-M9N, SMA (Qwiic)
SKU: SF-GPS-17285 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout is a high quality GPS board with equally impressive configuration options including SMA. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive sign...
Delivered by Mon 24 Aug
ESP32-S2-WROVER Module - 4 MB flash and 2 MB PSRAM
SKU: AF-4653 | Brand: Adafruit
The ESP32-S2-WROVER is a Wi-Fi module from Espressif built around the ESP32-S2 SoC — a single-core 240 MHz Xtensa LX7 processor with native USB support, 4 MB flash, and 2 MB PSRAM. It provides 2.4 GHz 802.11b/g/n Wi-F...
Delivered by Fri 4 Sep
SparkFun GPS Breakout - NEO-M9N, U.FL (Qwiic)
SKU: SF-GPS-15712 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it can receive signals from the ...
Delivered by Mon 24 Aug
SparkFun GPS Dead Reckoning Breakout - NEO-M8U (Qwiic)
SKU: SF-GPS-16329 | Brand: SparkFun
The SparkFun NEO-M8U GPS Breakout is a high quality, GPS board with equally impressive configuration options. The NEO-M8U takes advantage of u-blox's Untethered Dead Reckoning (UDR) technology. The module provides con...
Delivered by Mon 24 Aug
SparkFun GPS Breakout - NEO-M9N, Chip Antenna (Qwiic)
SKU: SF-GPS-15733 | Brand: SparkFun
The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality, GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver, meaning it ca...
Delivered by Thu 13 Aug
LV-MaxSonar-EZ4(MB1040)
SKU: DF-SEN0275 | Brand: DFRobot
The MB1040 LV-MaxSonar-EZ4 is a compact ultrasonic range sensor from MaxBotix that provides distance measurements from 15 cm to 645 cm (6" to 254") with 2.5 cm (1") resolution. It features the narrowest beam width of ...
Delivered by Mon 24 Aug
SparkFun GPS Breakout - Chip Antenna, SAM-M8Q (Qwiic)
SKU: SF-GPS-15210 | Brand: SparkFun
The SparkFun SAM-M8Q GPS Breakout features a u-blox SAM-M8Q 72-channel GNSS receiver with a built-in chip antenna. It supports GPS, GLONASS, Galileo, and BeiDou constellations simultaneously, providing improved positi...
Delivered by Mon 24 Aug
SparkFun GPS Breakout - ZOE-M8Q (Qwiic)
SKU: SF-GPS-15193 | Brand: SparkFun
The SparkFun ZOE-M8Q GPS Breakout is a miniaturised, high-accuracy GNSS receiver board with Qwiic (I2C) connectivity. The u-blox ZOE-M8Q is a 72-channel receiver that tracks GPS, GLONASS, BeiDou, and Galileo constella...
Delivered by Mon 24 Aug
SparkFun GPS Breakout - XA1110 (Qwiic)
SKU: SF-GPS-14414 | Brand: SparkFun
The SparkFun XA1110 GPS Breakout is a small I2C-supported module built for easy hookup, thanks to our Qwiic Connect System. Equipped with the XA1110 GPS module from GTOP, this board utilizes the MediaTek MT3333 chips...
Delivered by Thu 13 Aug
Maxbotix Ultrasonic Rangefinder - LV-EZ4 [LV-EZ4]
SKU: AF-982 | Brand: Adafruit
The LV-EZ4 from MaxBotix is a compact ultrasonic rangefinder that detects objects from 0 to 254 inches (6.45 metres), with calibrated range output from 6 to 254 inches at 1-inch resolution. Objects closer than 6 inche...
Delivered by Fri 4 Sep
SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)
SKU: SF-GPS-15136 | Brand: SparkFun
With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...
Delivered by Mon 24 Aug
SRF02 ultrasonic sensor
SKU: DF-SEN0005 | Brand: DFRobot
This low cost SFR02 ultrasonic ranger has both I2C and Serial interfaces. New AutoTune algorithms intelligently back the minimum range right up to the transducer ringdown for the very best performance possible, aut...
Delivered by Mon 24 Aug
Air Quality Monitor (PM 2.5, Formaldehyde, Temperature Humidity Sensor)
SKU: DF-SEN0233 | Brand: DFRobot
A multifunction air quality monitor that measures particulate matter (PM2.5), formaldehyde concentration, temperature, and humidity. It uses laser scattering to detect suspended particles in the air, an electrochemica...
Delivered by Thu 13 Aug
Breakout Board for XBee Module
SKU: SF-BOB-08276 | Brand: SparkFun
This is a simple breakout board for the popular XBee product from Digi. This board breaks out all 20 pins of the XBee to a 0.1" standard spacing dual row header. The spacing between 0.1" headers is 0.5" making it b...
Delivered by Mon 24 Aug
RFID Reader ID-3LA (125 kHz)
SKU: SF-SEN-11862 | Brand: SparkFun
RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple...
Delivered by Mon 24 Aug
SparkFun GPS Breakout
SKU: SF-BOB-11818 | Brand: SparkFun
This is a more universal GPS breakout board that uses a vertical SMD connector which is perfect for the GP-735T GPS receiver that we sell. It features 2 mounting holes and through-hole connections for wires or headers...
Delivered by Thu 13 Aug
URM37 Ultrasonic Sensor for Arduino / Raspberry Pi
SKU: DF-SEN0001 | Brand: DFRobot
URM37 V4.0 Arduino Ultrasonic Sensor comes with temperature compensation which provides better distance measurement accuracy. It is very unique feature in the industry. URM37 V4.0 Arduino Ultrasonic Sensor offers ...
Delivered by Mon 24 Aug
SparkFun IR Thermometer Evaluation Board - MLX90614
SKU: SF-SEN-10740 | Brand: SparkFun
An evaluation board for the MLX90614 non-contact infrared thermometer sensor. It pairs the MLX90614 with an ATmega328 running at 3.3 V (8 MHz Arduino bootloader), giving you a ready-to-use IR temperature sensor with s...
Delivered by Mon 24 Aug
Weatherproof TTL Serial JPEG Camera with NTSC Video and IR LEDs
SKU: AF-613 | Brand: Adafruit
Built for projects that need an outdoor-ready camera, this module combines a metal weatherproof enclosure, mounting hinge and a 1 meter long cable with the TTL serial and NTSC video signals brought out.It outputs NTSC...
Delivered by Fri 4 Sep
Gravity: Formaldehyde (HCHO) Sensor (Arduino Raspberry Pi Compatible)
SKU: DF-SEN0231 | Brand: DFRobot
The Formaldehyde (HCHO) sensor is an Arduino & Raspberry Pi compatible module, which is the ideal solution for indoor air quality monitor. This is a HCHO(CH2O) sensor module. It can be used to measure HCHO in a...
Delivered by Mon 24 Aug
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
