Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Adafruit ALS-PT19 Analog Light Sensor Breakout
SKU: AF-2748 | Brand: Adafruit
The Adafruit ALS-PT19 is a compact analog light sensor that provides a simple voltage output proportional to ambient light intensity. Its spectral response closely matches that of the human eye, thanks to a high infra...
Delivered by Wed 10 Jun
SparkFun Humidity and Temperature Sensor Breakout - Si7021
SKU: SF-SEN-13763 | Brand: SparkFun
A low-cost, highly accurate digital humidity and temperature sensor breakout board based on the Silicon Labs Si7021. Communicates over I²C with just two data lines, providing relative humidity and precise temperature ...
Delivered by Wed 10 Jun
Gravity: Arduino CO/Combustible Gas Sensor (MQ9)
SKU: DF-SEN0134 | Brand: DFRobot
The Gravity MQ-9 gas sensor detects carbon monoxide (CO) and combustible gases including methane and propane. It uses a semiconductor SnO2 sensing element that cycles between high and low temperatures — detecting CO a...
Delivered by Wed 10 Jun
Thermocouple Type-K Glass Braid Insulated [K]
SKU: AF-270 | Brand: Adafruit
A Type-K thermocouple with fiberglass braid insulation, rated to 500°C — far beyond the ~200°C limit of standard vinyl-insulated thermocouples. The bare bead probe design is suited to measuring both air and surface te...
Delivered by Wed 10 Jun
Gravity: 27 Pcs Arduino Sensor Kit
SKU: DF-KIT0011 | Brand: DFRobot
INTRODUCTION If you want to start playing with sensors, this sensor kit for arduino will be the perfect choice for you to get started. It comes with bundle of the most popular DFRobot sensors...
Delivered by Wed 10 Jun
Waterproof DS18B20 Digital temperature sensor + extras
SKU: AF-381 | Brand: Adafruit
This is a pre-wired and waterproofed version of the DS18B20 sensor. Handy for when you need to measure something far away, or in wet conditions. While the sensor is good up to 125°C the cable is jacketed in PVC ...
Delivered by Wed 10 Jun
PN532 NFC/RFID controller breakout board [v1.6]
SKU: AF-364 | Brand: Adafruit
The PN532 is the most popular NFC chip, and is what is embedded in pretty much every phone or device that does NFC. It can pretty much do it all, such as read and write to tags and cards, communicate with phones (s...
Delivered by Wed 10 Jun
Adafruit VL6180X Time of Flight Distance Ranging Sensor (VL6180)
SKU: AF-3316 | Brand: Adafruit
The Adafruit VL6180X is a close-range Time-of-Flight (ToF) distance sensor from ST that measures from approximately 5 mm to 100 mm (up to 150–200 mm in good conditions). It also includes a built-in ambient light senso...
Delivered by Wed 10 Jun
Vishay TSOP34156 IR Receiver Module, 56kHz
SKU: PL-837 | Brand: Pololu
The Vishay TSOP34156 is a general-purpose modulated IR receiver for IR-based remote-control projects. It features a wide operating voltage range and allows for relatively high data rates; this particular unit is tune...
Delivered by Wed 10 Jun
Sharp GP2Y0A21YK0F Analog Distance Sensor 10-80cm
SKU: PL-136 | Brand: Pololu
The Sharp GP2Y0A21YK0F is an infrared distance sensor that outputs an analogue voltage corresponding to the distance of the nearest object within its 10–80 cm detection range. Using IR triangulation, it provides relia...
Delivered by Wed 10 Jun
Wired Miniature Electret Microphone
SKU: AF-1935 | Brand: Adafruit
That's one tiny microphone! At about the size of a mature aphid, this wired Electret Microphone is perfect for your FONA. This microphone's very similar to our PCB-mount Elecret Microphone but is significantly sma...
Delivered by Wed 10 Jun
SparkFun Triple Axis Accelerometer Breakout - ADXL345
SKU: SF-SEN-09836 | Brand: SparkFun
This new version adds 2 standoff holes as well as an extra decoupling capacitor. The ADXL345 is a small, thin, low power, 3-axis MEMS accelerometer with high resolution (13-bit) measurement at up to +-16 g. Digital...
Delivered by Wed 10 Jun
Force Sensitive Resistor - Small
SKU: SF-SEN-09673 | Brand: SparkFun
A compact force sensitive resistor (FSR) from Interlink Electronics with a 4 mm (0.16″) diameter active sensing area. The resistance changes based on applied pressure — from over 1 MΩ with no pressure down to approxim...
Delivered by Wed 10 Jun
Infrared Thermometer - MLX90614
SKU: SF-SEN-09570 | Brand: SparkFun
Melexis' MLX90614ESF-BAA is an infrared thermometer designed for non-contact temperature sensing. An internal 17-bit ADC and a powerful DSP contribute to the MLX90614’s high accuracy and resolution. It has a huge numb...
Delivered by Wed 10 Jun
Learn to Solder - DIY Ultrasonic Ranging Electronic Kit
SKU: LB-LS6569 | Brand: Little Bird
A DIY soldering kit that builds into a functional ultrasonic distance meter. Using an HC-SR04 ultrasonic sensor, STC89C52 microcontroller, and 3-digit 7-segment display, this kit measures distances from 5cm to 4m with...
Delivered by Wed 10 Jun
RS485 Photosynthetically Active Radiation (PAR) Sensor (400-700nm)
SKU: DF-SEN0641 | Brand: DFRobot
The RS485 PAR Sensor measures photosynthetically active radiation in the 400–700 nm wavelength range — the light spectrum that plants use for photosynthesis. It converts incident radiation into a signal proportional t...
Delivered by Wed 10 Jun
C1001 60GHz mmWave Indoor Fall Detection Sensor for Arduino / ESP32 / micro:bit (11 Meters)
SKU: DF-SEN0623 | Brand: DFRobot
The C1001 mmWave Human Detection Sensor is a high-precision 60GHz millimeter-wave radar sensor engineered for advanced human detection. Unlike standard 24GHz millimeter-wave sensors that are limited to detecting prese...
Delivered by Wed 10 Jun
Sensor Trimpot ELECFREAKS PlanetX
SKU: EF-EF05018 | Brand: ElecFreaks
An analogue trimpot (trimmer potentiometer) sensor module from the ELECFREAKS PlanetX series, designed for use with micro:bit via RJ11 connection. The potentiometer provides stepless rotation over a 0°–300° range, out...
Delivered by Wed 10 Jun
Adafruit S-35710 Low-Power Wake Up Timer Breakout
SKU: AF-5959 | Brand: Adafruit
The Adafruit S-35710 Wake Up Timer Breakout is an ultra-low-power watchdog timer that can be programmed to trigger an alarm from 1 second up to 194 days, using a 24-bit second counter. Drawing only 0.2 µA, it's an int...
Delivered by Wed 10 Jun
PIR in case
SKU: LB-PIR-CABLE | Brand: Little Bird
A compact passive infrared (PIR) motion sensor housed in a protective case with a 45cm cable. Detects motion within a 6-metre range and 120° field of view, making it ideal for security systems, automatic lighting, and...
Delivered by Wed 10 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
