Sensors & Input

SKU: LB-LR0062 | Brand: Little Bird

This IR sensor can detect obstacles in front of it.  When an object is detected the green indicator light on the board will light up. There is a low-level output signal on the OUT port.It has a detection range of...

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...

SKU: DF-SEN0189 | Brand: DFRobot

The Gravity Analog Turbidity Sensor measures water clarity by detecting the level of suspended particles. It works by measuring light transmittance and scattering rate, which change with the amount of total suspended ...

SKU: AF-2831 | Brand: Adafruit

This Photo Transistor Light Sensor is a simple sensor that detects ambient light. It's kind of the opposite of an LED - when light hits the little chip inside, it induces current to flow from the long pin...

SKU: AF-1980 | Brand: Adafruit

The Adafruit TSL2591 is an ultra-high-range digital light sensor with a massive 600,000,000:1 dynamic range. It features both infrared and full-spectrum photodiodes, allowing you to separately measure infrared, full-s...

SKU: DF-SEN0101 | Brand: DFRobot

An RGB colour sensor breakout board based on the TAOS TCS3200 chip, with four built-in white LEDs for illumination. The TCS3200 can detect and measure a wide range of visible colours by converting light intensity to a...

SKU: DF-SEN0638 | Brand: DFRobot

HUSKYLENS 2 is a powerful AI vision sensor with a 1.6GHz dual-core processor and 6 TOPS AI accelerator. With 20+ built-in AI models and the ability to train and deploy custom YOLO models, it brings advanced computer v...

SKU: AF-189 | Brand: Adafruit

PIR sensors are used to detect motion from pets/humanoids from about 20 feet away (possibly works on zombies, not guaranteed). This one has an adjustable delay before firing (approx 2-4 seconds), adjustable sensiti...

SKU: DF-SEN0212 | Brand: DFRobot

The TCS34725 is an I2C RGB colour sensor that detects the red, green, and blue components of light in its environment and returns digital colour values. With high sensitivity, a wide dynamic range, and a built-in IR b...

SKU: AF-161 | Brand: Adafruit

CdS cells are little light sensors. As the squiggly face is exposed to more light, the resistance goes down. When its light, the resistance is about 5-10KΩ, when dark it goes up to 200KΩ. To use, connect one side o...

SKU: SF-ROB-09453 | Brand: SparkFun

This version of the QRE1113 breakout board features an easy-to-use analog output, which will vary depending on the amount of IR light reflected back to the sensor. This tiny board is perfect for line sensing applic...

SKU: DF-DFR0076 | Brand: DFRobot

This Gravity analog flame sensor detects fire and infrared light sources in the 760–1,100 nm wavelength range. With a 60° detection angle and analogue output proportional to flame distance, it's widely used in firefig...

SKU: AF-5990 | Brand: Adafruit

The Adafruit Infrared IR Remote Transceiver combines a high-powered IR transmitter and a sensitive 38 kHz IR receiver on a single board. With two 940 nm IR LEDs (one vertical, one horizontal) driven by an onboard N-ch...

SKU: WS-25515 | Brand: Waveshare

Round 2D Codes Scanner Module, Barcode/QR code Reader, With LED Indicator, Small Size, Easy to Integrate 2D Codes Scanner Module  1D/2D Codes Recognition | Small Size | Screen scanning   The Barcode ...

SKU: EF-EF03424 | Brand: ElecFreaks

Ring:bit car V2 line following module is a dedicated module designed for the Ring:bit car V2, it is easy to be installed to achieve the line following function for the Ring:bit car V2.Equipped with double infrared ...

SKU: DF-SEN0448 | Brand: DFRobot

A 4-wire slot-type photoelectric switch with integrated optical transmitter and receiver. The 5mm detection slot can detect objects passing through, including transparent materials, making it ideal for counting, posit...

SKU: AF-4162 | Brand: Adafruit

The Adafruit VEML7700 is a high-accuracy ambient light sensor from Vishay that outputs calibrated lux values over I2C. Unlike basic light sensors that return unitless brightness readings, the VEML7700 calculates lux (...

SKU: AF-3985 | Brand: Adafruit

This T-Slot Photo Interrupter with Cable is a simple plastic sensor with two elements - an IR LED and an IR photo-transistor, situated across a U-shaped gap. You can control the IR LED and turn it on to transmit IR...

SKU: AF-1375 | Brand: Adafruit

This breakout board is the simplest way to create a project with a single "toggle" capacitive touch sensor. No microcontroller is required here - just power with 1.8 to 5.5VDC and touch the pad to activate the sens...

SKU: DF-SEN0116 | Brand: DFRobot

An AB two-phase optical encoder designed for the DFRobot 2WD MiniQ robot chassis. Uses two infrared reflective sensors to generate quadrature pulse waveforms with approximately 90° phase difference, allowing you to de...