Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
SCXL-MaxSonar-WRLT (MB7586)
SKU: DF-SEN0277 | Brand: DFRobot
The MB7586 SCXL-MaxSonar-WRLT is a long-range, weather-resistant ultrasonic distance sensor with millimetre resolution. It detects the nearest target from 500 mm to 9,999 mm (approximately 10 metres) and provides outp...
Out of stock
Pycom Pytrack - GPS+motion shield for WiPy, SiPy, and LoPy
SKU: PI-PYC007 | Brand: Pimoroni
The Pycom Pytrack is a GPS and motion sensor shield compatible with Pycom multi-network modules including the WiPy, SiPy, and LoPy. It provides accurate GNSS positioning, a 3-axis accelerometer, USB serial access, LiP...
Out of stock
MDBT42Q Breakout
SKU: PI-ESP004 | Brand: Pimoroni
This board has the same Bluetooth LE module that used on Puck.js and Pixl.js, pre-programmed with Espruino. Just apply power, connect with Bluetooth LE or Serial and start writing JavaScript! This is a boar...
Out of stock
SparkFun GPS-RTK2 Board - ZED-F9P (Qwiic)
SKU: SF-GPS-15136 | Brand: SparkFun
With GPS you are able to know where you are, where you’re going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...
Out of stock
SparkFun Triad Spectroscopy Sensor - AS7265x (Qwiic)
SKU: SF-SEN-15050 | Brand: SparkFun
The SparkFun Triad Spectroscopy Sensor combines three AS7265x spectral sensors with onboard UV, visible, and IR LEDs to measure light across 18 individual frequencies — from 410 nm (UV) to 940 nm (IR). It brings light...
Out of stock
RFID Reader ID-3LA (125 kHz)
SKU: SF-SEN-11862 | Brand: SparkFun
RFID (radio-frequency identification) is the wireless non-contact use of radio-frequency electromagnetic fields, for the purposes of identifying and tracking tags attached to objects. This is the ID-3LA, a very simple...
Out of stock
GPS Receiver for Arduino (Model A)
SKU: DF-TEL0083-A | Brand: DFRobot
This GPS Receiver is Discontinued Now, We recommend other best selling GPS Sensor as a suitable replacement. GPS receivers can be easily found in daily life, such as smartphones, cars, and tablets. T...
Out of stock
SparkFun OpenScale
SKU: SF-SEN-13261 | Brand: SparkFun
The SparkFun OpenScale is an open-source weight measurement board designed for load cells. Simply connect a four-wire or five-wire load cell of any capacity, plug into USB, open a serial terminal at 9,600 bps, and you...
Out of stock
SparkFun RFID Starter Kit
SKU: SF-KIT-13198 | Brand: SparkFun
This it the SparkFun RFID Starter Kit, an all-in-one kit that offer everything you need to get your next RFID project off the ground. This kit includes our USB RFID Reader, ID-12LA RFID module, and two 125kHz RFID car...
Out of stock
SparkFun IR Thermometer Evaluation Board - MLX90614
SKU: SF-SEN-10740 | Brand: SparkFun
An evaluation board for the MLX90614 non-contact infrared thermometer sensor. It pairs the MLX90614 with an ATmega328 running at 3.3 V (8 MHz Arduino bootloader), giving you a ready-to-use IR temperature sensor with s...
Out of stock
Leddar M16 Sensor Module (45 degree beam)
SKU: DF-SEN0200 | Brand: DFRobot
INTRODUCTION The Leddar M16 Sensor Module is an advanced sensing solution that combines 16 independent active elements into a single sensor, resulting in rapid, continuous and accurate de...
Out of stock
Leddar M16 Sensor Module (95 degree beam)
SKU: DF-SEN0201 | Brand: DFRobot
INTRODUCTION The Leddar M16 Sensor Module is an advanced sensing solution that combines 16 independent active elements into a single sensor, resulting in rapid, continuous and accurate de...
Out of stock
RPLIDAR A2 - 360 Degree Laser Scanner Development Kit
SKU: DF-DFR0445 | Brand: DFRobot
RPLIDAR A2 is the next generation low cost 360 degree 2D laser scanner (LIDAR) solution developed by SLAMTEC. It can take up to 4000 samples of laser ranging per second with high rotation speed. And equipped with S...
Out of stock
URM07-UART Low-Power Consumption Ultrasonic Sensor (20~750cm)
SKU: DF-SEN0153 | Brand: DFRobot
The URM07 is an ultra-low-power UART ultrasonic distance sensor with an effective range of 20–750 cm. Operating on 3.0–5.5 V, it is directly compatible with 3.3 V and 5 V microcontrollers including Arduino and Raspber...
Out of stock
u-blox ZED-X20P Allband GNSS RTK Breakout (Qwiic)
SKU: SF-GPS-28871 | Brand: SparkFun
This GNSS RTK breakout brings the u-blox X20 engine to a maker-friendly board for high-precision positioning projects. It is designed around the ZED-X20P all-band receiver and can process signals from GPS, Galileo, Be...
Out of stock
LG290P Quadband GNSS RTK Breakout (Qwiic)
SKU: SF-GPS-26620 | Brand: SparkFun
Built around the Quectel LG290P, this compact RTK GNSS breakout is designed for high-precision positioning projects that need quad-band, multi-constellation reception. It follows the same board dimensions, pin layout ...
Out of stock
GPS-RTK Dead Reckoning Kit (ZED-F9R, SMA)
SKU: SF-KIT-23452 | Brand: SparkFun
Get started with high-precision RTK GNSS and dead reckoning using u-blox's ZED-F9R module. This kit combines a sensor-fusion GPS breakout, a multiband SMA antenna and a USB cable so you have the core hardware needed f...
Out of stock
Simultaneous RFID Reader - M7E Hecto
SKU: SF-WRL-24738 | Brand: SparkFun
This UHF RFID reader brings long-range, multi-tag RFID reading and writing to embedded projects, desktop testing and inventory-style applications. Built around the JADAK M7E Hecto module, it works with standard EPCglo...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
