Sensors & Input

SKU: DF-DFR0998 | Brand: DFRobot

This real-time clock (RTC) module uses the SD3031 chip, which has an integrated crystal oscillator and temperature compensator. This provides high-precision timing and stability. At a temperature of 25 °C, the accurac...

SKU: DF-SEN0536 | Brand: DFRobot

The Gravity SCD41 Infrared CO2 Sensor provides accurate carbon dioxide, temperature, and humidity measurements in a single compact module. Based on Sensirion's SCD41 sensor, it uses photoacoustic NDIR (non-dispersive ...

SKU: SF-SEN-20844 | Brand: SparkFun

The SparkFun ENS160 Indoor Air Quality Sensor is a digital multi-gas sensor solution with four sensor elements that can be used in a wide range of applications including building automation, smart home, and HVAC. The ...

SKU: EC-DPI32110W | Brand: Elecrow

ESP32-S2-WROVER and ESP32-S2-WROVER-I use ESP32-S2 chip. The ESP32-S2 chip is equipped with an Xtensa® 32-bit LX7 single-core processor with a working frequency of up to 240 MHz. The user can turn off the power of the...

SKU: EC-ARS03218S | Brand: Elecrow

The board is designed for beginners in Arduino, with various components available that makes you build more than 10 projects easily. You won’t have to solder or connect anything at all, just plug it in a shield and st...

SKU: M5-K023 | Brand: Little Bird

The PM2.5 Air Quality Kit combines a PMSA003 laser particulate sensor with an SHT20 temperature and humidity sensor in a single M5Stack-compatible module. It measures ambient particulate concentration, temperature, an...

SKU: DF-SEN0291 | Brand: DFRobot

Gravity: I2C Digital Wattmeter is a high-resolution, high-precision, large-scale measurement module that can measure the voltage, current and power of various electronic modules and electrical equipment within 26V 8A,...

SKU: SF-BOB-15439 | Brand: SparkFun

The SparkFun PCA9306 Level Translator Breakout provides dual bidirectional voltage-level translation for I2C and SMBus lines. It lets you safely connect devices operating at different logic levels — for example, a 3.3...

SKU: FT-HUMID | Brand: Freetronics

Measure temperature and relative humidity with this simple, Arduino-compatible sensor module based on the DHT22. With just three connections (GND, power, and data), you can read both temperature and humidity from a si...

SKU: DF-SEN0636 | Brand: DFRobot

The Gravity UV Index Sensor measures ultraviolet radiation across the 240–370 nm wavelength range, covering UVA, UVB, and UVC bands. It directly outputs a UV index (0–11) and a harm risk level (1–5), eliminating the n...

SKU: DF-SEN0610 | Brand: DFRobot

##Introduction The Gravity: C4001 millimeter-wave presence sensor, operating at a wavelength signal of 24GHz, boasts a horizontal detection range of 100°, a presence detection range of 8 meters, and a motion detection...

SKU: SF-SEN-22956 | Brand: SparkFun

The SparkFun Photoacoustic Spectroscopy CO2 Sensor features the Infineon XENSIV PAS CO2 (PASCO2V01) sensor, which delivers highly accurate CO2 measurements in direct parts-per-million (ppm) format. The photoacoustic s...

SKU: DF-SEN0467 | Brand: DFRobot

This is a sensor that detects hydrogen sulfide concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentra...

SKU: SF-DEV-22462 | Brand: SparkFun

The SparkFun DataLogger IoT is a data logger that comes preprogrammed to automatically log GPS and various pressure, humidity, and distance sensors. All without writing a single line of code! The DataLogger automatica...

SKU: SF-SEN-23352 | Brand: SparkFun

QR codes are a great way for users to communicate with microcontrollers, whether it’s passing WiFi credentials to set up connectivity or sending personal information to fill out a digital badge. Reading them from a ma...

SKU: DF-DFR0979 | Brand: DFRobot

The Gravity CH423 I2C 24 Digital IO Expansion Module extends your microcontroller with 24 additional digital output/input pins over a standard I2C connection. Based on the CH423 chip, it provides 8 GPIOs with interrup...

SKU: DF-SEN0465 | Brand: DFRobot

This is a sensor that detects oxygen concentration and supports three output modes: analog, I2C, and UART. The probe has been calibrated at the factory, which can quickly and accurately measure the concentration of ox...

SKU: DF-SEN0470 | Brand: DFRobot

A factory-calibrated electrochemical sulfur dioxide (SO2) sensor with I2C, UART, and analogue output modes. Part of the DFRobot Gravity gas sensor series, this module quickly and accurately measures SO2 concentration ...

SKU: DF-KIT0176 | Brand: DFRobot

The Gravity I2C 1 kg Weight Sensor Kit is a complete scale-building kit that includes a load cell, HX711 signal adapter board, acrylic mounting bracket, and all hardware needed to measure weight from 1 g to 1,000 g. T...

SKU: DF-SEN0456 | Brand: DFRobot

This is a Arduino compatible pressure sensor module with a measuring range of 15-700kPa, which supports I2C digital output and can be calibrated according to known pressure values and allows fast and accurate measurem...