Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Qwiic Soil Moisture Sensor
SKU: SF-SEN-24409 | Brand: SparkFun
This compact breakout board measures moisture in soil and similar materials using two large exposed pads as conductivity probes. As the soil gets wetter, conductivity between the pads increases, resistance drops, and ...
Delivered by Thu 1 Oct
Gravity HF Gas Sensor (Calibrated) - I2C/UART/Analogue
SKU: DF-SEN0475 | Brand: DFRobot
Measure hydrogen fluoride concentration with a factory-calibrated electrochemical probe that supports analogue, I2C and UART output modes. It is designed for quickly building an HF concentration detector for industria...
Delivered by Thu 1 Oct
Gravity Calibrated NH3 Ammonia Sensor - I2C/UART
SKU: DF-SEN0469 | Brand: DFRobot
This calibrated gas sensor measures ammonia concentration in the environment using an electrochemical probe. It supports three output modes — analogue, I2C and UART — so it can slot into a wide range of microcontrolle...
Delivered by Thu 1 Oct
SparkFun Electret Microphone Breakout
SKU: SF-BOB-12758 | Brand: SparkFun
The SparkFun Electret Microphone Breakout pairs a small electret microphone capsule with a 60× OPA344 op-amp preamplifier, making it easy to detect sound with a microcontroller's analogue-to-digital converter. Pick up...
Out of stock
ESP32-S2-WROOM WiFi Module Based on ESP32-S2 Chip with PCB Antenna
SKU: EC-DPI32110W | Brand: Elecrow
ESP32-S2-WROVER and ESP32-S2-WROVER-I use ESP32-S2 chip. The ESP32-S2 chip is equipped with an Xtensa® 32-bit LX7 single-core processor with a working frequency of up to 240 MHz. The user can turn off the power of the...
Out of stock
QTR-1A Reflectance Sensor (2-Pack)
SKU: PL-2458 | Brand: Pololu
The QTR-1A reflectance sensor carries a single infrared LED and phototransistor pair in an inexpensive, tiny 0.5" x 0.3" module that can be mounted almost anywhere and is great for edge detection and line fo...
Out of stock
ACS711EX Current Sensor Carrier -31A to +31A
SKU: PL-2453 | Brand: Pololu
A compact carrier board for the Allegro ACS711EX Hall effect-based linear current sensor with overcurrent fault output. It measures bidirectional current up to ±31 A with a proportional analogue voltage output centred...
Out of stock
HIH-4030 Humidity Sensor Carrier
SKU: PL-1643 | Brand: Pololu
Sparkfun’s carrier board for the HIH-4030 relative humidity (%RH) sensor from Honeywell outputs an analog voltage that varies nearly linearly with humidity. It operates at 5 V while drawing only 200 μA and ...
Out of stock
NODE Audio Dev Module (WM8978, DHT12)
SKU: M5-M017 | Brand: Little Bird
Description Node, like its namesake, is a smart node with full-featured functions in a IoT application scenarios. Together with M5Stack Core, it can be programmed as an intelligent speaker like Echo. Node provides ...
Out of stock
Temperature Sensor - TMP36
SKU: PI-COM1701 | Brand: Pimoroni
The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to the Celsius temperature. It also doesn’t require any external calibration to provide t...
Out of stock
Light Sensor Gizmo for Playground - Analog Input
SKU: TR-GIZLIGHT | Brand: 4tronix
The Playground system is an easy way to connect from Crumble, Raspberry Pi or BBC micro:bit to useful GizmosThe Light Sensor Gizmo provides an easy way to connect an Analog input which varies with the brightness of th...
Out of stock
MyoWare Muscle Sensor
SKU: PI-AT-04-001 | Brand: Pimoroni
The MyoWare Muscle Sensor is an all-in-one electromyography (EMG) sensor that measures the filtered and rectified electrical activity of a muscle. It outputs 0 V to Vs (supply voltage) depending on the level of activi...
Out of stock
Analog 2-axis Thumb Joystick with Select Button + Breakout Board
SKU: AF-512 | Brand: Adafruit
A PSP/Xbox-style analog thumb joystick with a built-in press-to-select button, mounted on a breakout board designed for easy panel mounting. Unlike simple directional joysticks, this analog stick provides precise, pro...
Out of stock
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
