Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
C1001 60GHz mmWave Indoor Fall Detection Sensor for Arduino / ESP32 / micro:bit (11 Meters)
SKU: DF-SEN0623 | Brand: DFRobot
The C1001 mmWave Human Detection Sensor is a high-precision 60GHz millimeter-wave radar sensor engineered for advanced human detection. Unlike standard 24GHz millimeter-wave sensors that are limited to detecting prese...
Delivered by Wed 10 Jun
SparkFun Pulsed Coherent Radar Sensor - Acconeer XM125 (Qwiic)
SKU: SF-SEN-24540 | Brand: SparkFun
Forget ultrasonic and infrared sensors; the SparkFun Qwiic Pulsed Coherent Radar Sensor - Acconeer XM125 brings powerful 60 GHz radar technology to your projects. This sensor isn't limited to surface detection; it c...
Delivered by Fri 19 Jun
SparkFun Human Presence and Motion Sensor - STHS34PF80 (Qwiic)
SKU: SF-SEN-22494 | Brand: SparkFun
The STHS34PF80 sensor, from ST Microelectronics, is designed to measure the precise black-body radiation (as described by Planck's law) of an object; as well as monitor ambient temperature conditions within its 80° fi...
Delivered by Wed 10 Jun
Gravity: Electrochemical Oxygen Sensor (0-100%Vol) - I2C
SKU: DF-SEN0496 | Brand: DFRobot
This full-scale oxygen sensor uses an original AO2 CiTiceL electrochemical probe to measure oxygen concentrations from 0–100%Vol via I2C digital output. A built-in calibration algorithm on the signal board supports si...
Delivered by Fri 19 Jun
SparkFun GPS-RTK-SMA Breakout - ZED-F9P (Qwiic)
SKU: SF-GPS-16481 | Brand: SparkFun
With GPS you are able to know where you are, where you're going, and how to get there anywhere on Earth within 30 seconds. This means the higher the accuracy the better! GPS Real Time Kinematics (RTK) has mastered dia...
Delivered by Fri 19 Jun
Gravity: LTC4316 I2C Address Shifter - I2C Conflict Resolver for Arduino & Raspberry Pi
SKU: DF-DFR1193 | Brand: DFRobot
The Gravity LTC4316 I2C Address Shifter resolves I2C address conflicts, allowing multiple sensors with the same address to operate on a single bus. Insert this module between your microcontroller and sensor – address ...
Delivered by Fri 19 Jun
50m TOF Laser Ranging Sensor (±3cm Accuracy, 100Hz, 100K LUX Resistant)
SKU: DF-SEN0648 | Brand: DFRobot
The TOFSense F2P is a professional-grade laser distance sensor using dTOF (Direct Time-of-Flight) technology. With 50m range, ±3cm accuracy, and 100Hz refresh rate, it's engineered for drones, traffic monitoring, indu...
Delivered by Fri 19 Jun
Adafruit SPA06-003 Temperature + Pressure Sensor
SKU: AF-6420 | Brand: Adafruit
The Adafruit SPA06-003 is an affordable barometric pressure and temperature sensor from Goertek, ideal for basic environmental sensing and DIY quadcopter builds. It measures 300–1100 hPa (approximately −500 to +9000 m...
Delivered by Tue 30 Jun
Adafruit STHS34PF80 IR Presence / Motion Sensor
SKU: AF-6426 | Brand: Adafruit
The Adafruit STHS34PF80 is a compact IR presence and motion sensor that detects human and animal presence up to 4 metres away — without requiring a lens. Unlike traditional chunky PIR sensors with simple digital outpu...
Delivered by Tue 30 Jun
Adafruit SEN6x Breakout for Sensirion SEN66 - STEMMA QT / Qwiic
SKU: AF-6331 | Brand: Adafruit
The Adafruit SEN6x Breakout lets you quickly connect a Sensirion SEN66 (or other SEN6x) environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding r...
Delivered by Tue 30 Jun
Yahboom K230 vision module + Adjustable Bracket
SKU: YH-3000101267 | Brand: Yahboom
Yahboom K230 vision module is a high-performance, low-power embedded AI vision processing module designed for edge computing scenarios. It is designed based on the end-side AloT chip of the RISC-V architecture, with 6...
Delivered by Wed 10 Jun
Lark Weather Station - Portable Educational Weather Device (Compatible with Arduino, micro:bit, ESP32)
SKU: DF-EDU0157-EN | Brand: DFRobot
The Lark Weather Station is a compact, all-in-one portable weather device that measures wind speed, wind direction, temperature, humidity, and air pressure. It supports real-time data output via I2C and UART, making i...
Delivered by Fri 19 Jun
LPB40B IP65 DToF Single-Point Ranging LiDAR Sensor (0.05-40m, UART)
SKU: DF-SEN0586 | Brand: DFRobot
The LPB40B is a single-point ranging LiDAR sensor based on Direct Time-of-Flight (DToF) technology. It measures distances from 0.05 to 40 m on high-reflectivity targets, with ±5 cm accuracy across the full range. The ...
Delivered by Fri 19 Jun
Adafruit SEN54 or SEN55 Adapter Breakout - STEMMA QT / Qwiic
SKU: AF-5964 | Brand: Adafruit
The Adafruit SEN54/SEN55 Adapter Breakout lets you quickly connect a Sensirion SEN5x environmental sensor node to any microcontroller or single-board computer via STEMMA QT / Qwiic — no soldering or breadboarding requ...
Delivered by Tue 30 Jun
SparkFun Pressure Sensor - BMP384 (Qwiic)
SKU: SF-SEN-19662 | Brand: SparkFun
The SparkFun Qwiic Pressure Sensor features the BMP384 pressure sensor from Bosch Sensortec. The BMP384 excels at high-resolution measurements (up to 24-bit) and uses a gel-filled cavity to provide extra resistance t...
Delivered by Fri 19 Jun
SparkFun Qwiic dToF Imager - TMF8820
SKU: SF-SEN-19036 | Brand: SparkFun
A direct time-of-flight (dToF) sensor from AMS that measures distances up to 5 metres using SPAD (Single Photon Avalanche Photodiode) and histogram technology. The TMF8820 provides 3×3 multi-zone output with multi-obj...
Delivered by Fri 19 Jun
Adafruit ESP32-S2 Feather with BME280 Sensor - STEMMA QT
SKU: AF-5303 | Brand: Adafruit
The Adafruit ESP32-S2 Feather with BME280 is identical to the standard ESP32-S2 Feather but with an on-board BME280 temperature, humidity, and barometric pressure sensor at I2C address 0x77. This makes it an instant I...
Delivered by Tue 30 Jun
Adafruit TMP235 - Plug-and-Play STEMMA Analog Temperature Sensor - TMP235
SKU: AF-4686 | Brand: Adafruit
The Adafruit TMP235 is a plug-and-play analog temperature sensor with a 3-pin JST PH (STEMMA) connector. Unlike I2C sensors, this one outputs a simple analog voltage proportional to temperature — just connect it to an...
Delivered by Tue 30 Jun
SparkFun Photodetector Breakout - MAX30101 (Qwiic)
SKU: SF-SEN-16474 | Brand: SparkFun
The SparkFun Photodetector Breakout is an updated version of the SparkFun Particle Sensor Breakout includes the MAX30101, a highly sensitive optical sensor and successor to the MAX30105 and MAX30102. The MAX30101 Brea...
Delivered by Fri 19 Jun
M5StickC Yun Hat(SH20,BMP280,SK6812)
SKU: M5-U070 | Brand: Little Bird
The M5StickC Yun HAT is a cloud-shaped multi-sensor environmental monitoring accessory designed to mount on the M5StickC via the top socket. It integrates a temperature and humidity sensor (SHT20), barometric pressure...
Delivered by Wed 10 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
