Sensors & Input

SKU: LB-BK-LR0282 | Brand: Little Bird

Description This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of a...

SKU: LB-LR0282 | Brand: Little Bird

This Light Dependant Resistor (LDR) can be used to easily measure ambient light with your Arduino or other board with analog input. You will need to set this up as a voltage divider with a resistor of around 10KΩ. ...

SKU: SF-SEN-10988 | Brand: SparkFun

This is the same temperature sensor that is included in our SparkFun Inventor’s Kit. The TMP36 is a low voltage, precision centigrade temperature sensor. It provides a voltage output that is linearly proportional to t...

SKU: LB-LS2299 | Brand: Little Bird

A UV detection sensor module that measures ultraviolet light intensity in the 200–370 nm wavelength range. The analogue output (0–1 V DC) is proportional to the UV Index, making it suitable for measuring UV exposure i...

SKU: LB-LR0007 | Brand: Little Bird

Flame Detection Sensor Module for use with Arduino Sensor for flame wavelengths between 760 nm to 1100 nm infrared is most sensitive60 degree detection sensor   Two outputs mode: AO: analog output, real-time ou...

SKU: LB-LR0030 | Brand: Little Bird

A simple analog Hall effect sensor module for detecting magnetic fields with Arduino. When a magnet is detected, the on-board LED turns on and the analog output changes proportionally to the field strength — making it...

SKU: LB-LR0001 | Brand: Little Bird

This convenient little module allows you to control both the X-axis and Y-axis using two 10k potentiometers.  Also featured is an additional pushbutton switch providing another optional input for your project....

SKU: LB-LR0214-37 | Brand: Little Bird

Other Features: Voltage: 3V / 5V; Amplification factor: 330; Wavelength: 609nm; A product for Arduino.1 x   Pulse sensor Pulse Heart Rate Sensor Module  

SKU: AF-1713 | Brand: Adafruit

Add an ear to your project with this well-designed electret microphone amplifier with AGC. This fully assembled and tested board comes with a 20-20KHz electret microphone soldered on. For the amplification, we use th...

SKU: AF-4890 | Brand: Adafruit

Need to measure something with a very slim sensor? This precision 10K thermistor is an inexpensive way to measure temperature in a small gap, or taped to a flat surface, it's only 0.2mm wide!The resistance in 25°C is ...

SKU: SF-SEN-15901 | Brand: SparkFun

This Weather Meter Kit provides the three core sensors for a DIY weather station: an anemometer (wind speed), a wind vane (wind direction), and a rain gauge. All three sensors use passive magnetic reed switches rather...

SKU: AF-1063 | Brand: Adafruit

A well-designed electret microphone amplifier breakout built around the Maxim MAX4466 op-amp, specifically engineered for microphone amplification with excellent power supply noise rejection. The board comes fully ass...

SKU: AF-2831 | Brand: Adafruit

This Photo Transistor Light Sensor is a simple sensor that detects ambient light. It's kind of the opposite of an LED - when light hits the little chip inside, it induces current to flow from the long pin...

SKU: SF-SEN-10293 | Brand: SparkFun

A simple piezo element that can be used as both a sensor and a small audio transducer. When flexed or tapped, it generates a voltage that can be read by a microcontroller, making it ideal for knock and vibration detec...

SKU: AF-165 | Brand: Adafruit

The TMP36 is a low-power analog temperature sensor that outputs a voltage proportional to ambient temperature. It operates on 2.7–5.5V and requires no external calibration — simply read the analog voltage and convert ...

SKU: EC-ACS77312JS | Brand: Elecrow

Turn your Arduino into a simple game controller with this plug-and-play joystick shield. It features a two-axis thumb joystick with a select button plus four additional momentary push buttons — giving you retro game-p...

SKU: LB-LR0003 | Brand: Little Bird

This sound detection and microphone module provides both analogue and digital outputs for detecting sound with a microcontroller. The analogue output (AO) delivers a real-time voltage signal proportional to sound inte...

SKU: DF-SEN0206 | Brand: DFRobot

INTRODUCTION We can divide temperature measurement in to two types: contact and non-contact. Contact measurement can only accurately measure temperature when the testing object and the se...

SKU: AF-5463 | Brand: Adafruit

This rubber sheet is made of the same carbon-black impregnated rubber material that our conductive rubber cord uses. Traditionally it would be used for EMF shielding, or conductive gaskets - but it's very fun to play ...

SKU: LB-10K-5 | Brand: Little Bird

A pack of five NTC thermistor temperature probes, each with a 1-metre wire lead for remote temperature sensing. These 10 KΩ (at 25°C) NTC sensors are sealed in a cylindrical metal probe for durability and are suitable...