Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Adafruit 9-DOF Orientation IMU Fusion Breakout - BNO085 (BNO080) - STEMMA QT / Qwiic
SKU: AF-4754 | Brand: Adafruit
The BNO085 from Hillcrest Laboratories is a 9-DOF IMU with built-in sensor fusion — it combines accelerometer, gyroscope and magnetometer data on-chip and delivers ready-to-use orientation, motion detection and activi...
Delivered by Wed 10 Jun
Adafruit Sensirion SHT40 Temperature Humidity Sensor - STEMMA QT / Qwiic
SKU: AF-4885 | Brand: Adafruit
The Adafruit Sensirion SHT40 is a high-accuracy temperature and humidity sensor featuring a true I2C interface for simple two-wire communication. Part of the fourth generation of Sensirion's acclaimed SHT sensor famil...
Delivered by Wed 10 Jun
Adafruit TDK InvenSense ICM-20948 9-DoF IMU (MPU-9250 Upgrade) - STEMMA QT / Qwiic
SKU: AF-4554 | Brand: Adafruit
The Adafruit TDK InvenSense ICM-20948 is a compact 9-DoF Inertial Measurement Unit that packs a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer into a single breakout board. It pairs InvenSense's MEMS ...
Delivered by Wed 10 Jun
SparkFun 9DoF IMU Breakout - ICM-20948 (Qwiic)
SKU: SF-SEN-15335 | Brand: SparkFun
The SparkFun 9DoF IMU Breakout brings InvenSense's ICM-20948 9-axis motion tracking sensor to a Qwiic-enabled breakout board with an on-board logic level shifter and broken-out GPIO pins. The ICM-20948 is an extremely...
Delivered by Wed 10 Jun
Adafruit SCD-30 - NDIR CO2 Temperature and Humidity Sensor - STEMMA QT / Qwiic
SKU: AF-4867 | Brand: Adafruit
The Adafruit SCD-30 is a true NDIR (Non-Dispersive Infrared) CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. With an integrated...
Delivered by Wed 10 Jun
Adafruit MPR121 12-Key Capacitive Touch Sensor Gator Breakout - STEMMA QT / Qwiic
SKU: AF-4830 | Brand: Adafruit
The Adafruit MPR121 Gator Breakout adds 12 capacitive touch inputs to any microcontroller project — no soldering required. With large alligator/croc-clip friendly pads and STEMMA QT / Qwiic connectors, simply clip con...
Delivered by Tue 30 Jun
Adafruit MS8607 Pressure Humidity Temperature PHT Sensor - STEMMA QT / Qwiic
SKU: AF-4716 | Brand: Adafruit
The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a...
Delivered by Wed 10 Jun
Adafruit 9-DOF Absolute Orientation IMU Fusion Breakout - BNO055 - STEMMA QT / Qwiic
SKU: AF-4646 | Brand: Adafruit
The Adafruit BNO055 STEMMA QT breakout delivers complete 9-DOF orientation sensing with onboard sensor fusion and plug-and-play I2C connectivity. The Bosch BNO055 combines an accelerometer, gyroscope, and magnetometer...
Delivered by Wed 10 Jun
Adafruit MPU-6050 6-DoF Accel and Gyro Sensor - STEMMA QT Qwiic
SKU: AF-3886 | Brand: Adafruit
The Adafruit MPU-6050 breakout combines a 3-axis accelerometer and 3-axis gyroscope in a single compact sensor, providing 6 degrees of freedom (6-DoF) motion sensing over I2C. A proven and popular IMU, the MPU-6050 is...
Delivered by Tue 30 Jun
SparkFun 6DoF IMU Breakout - BMI270 (Qwiic)
SKU: SF-SEN-22397 | Brand: SparkFun
The SparkFun BMI270 6DoF IMU Breakout is a Qwiic-enabled board featuring the ultra-low-power BMI270 inertial measurement unit from Bosch. It combines a 16-bit tri-axial accelerometer and 16-bit tri-axial gyroscope wit...
Delivered by Wed 10 Jun
Adafruit Sensirion SHT45 Precision Temperature & Humidity Sensor
SKU: AF-5665 | Brand: Adafruit
The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. This version does not include a PTFE membr...
Delivered by Wed 10 Jun
Adafruit MCP9808 High Accuracy I2C Temperature Sensor Breakout
SKU: AF-5027 | Brand: Adafruit
The Adafruit MCP9808 is a high-accuracy digital temperature sensor with ±0.25°C typical accuracy over its −40°C to +125°C range and 0.0625°C resolution. It communicates over standard I2C and runs on 2.7V to 5.5V power...
Delivered by Wed 10 Jun
Adafruit MSA311 Triple Axis Accelerometer - STEMMA QT / Qwiic
SKU: AF-5309 | Brand: Adafruit
The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...
Delivered by Wed 10 Jun
SparkFun CO₂ Humidity and Temperature Sensor - SCD41 (Qwiic)
SKU: SF-SEN-22396 | Brand: SparkFun
This SparkFun CO2 Humidity and Temperature Sensor features the next-generation SCD41 photoacoustic CO2 sensor for high-accuracy environmental readings. The SCD41 uses Sensirion's PASens® photoacoustic measurement syst...
Delivered by Fri 19 Jun
ADXL375 - High G Accelerometer (+-200g) with I2C and SPI
SKU: AF-5374 | Brand: Adafruit
The Adafruit ADXL375 is a high-G triple-axis accelerometer capable of measuring up to ±200g of force. It communicates via I2C or SPI and includes STEMMA QT connectors for solderless I2C connections. An on-board 3.3V r...
Delivered by Wed 10 Jun
Adafruit EMC2101 I2C PC Fan Controller and Temperature Sensor - STEMMA QT / Qwiic
SKU: AF-4808 | Brand: Adafruit
The Adafruit EMC2101 breakout is an I2C fan controller and temperature sensor that makes it easy to integrate 3-pin or 4-pin PC fans into your projects. The Microchip/SMSC EMC2101 handles PWM speed control and tachome...
Delivered by Tue 30 Jun
SparkFun Air Quality Sensor - SGP40 (Qwiic)
SKU: SF-SEN-18345 | Brand: SparkFun
The SparkFun SGP40 Air Quality Sensor measures volatile organic compound (VOC) levels in indoor environments using Sensirion's CMOSens technology. The metal oxide (MOx) sensor with a temperature-controlled micro hotpl...
Delivered by Fri 19 Jun
Adafruit LSM6DSO32 6-DoF Accelerometer and Gyroscope - STEMMA QT / Qwiic
SKU: AF-4692 | Brand: Adafruit
The Adafruit LSM6DSO32 is a 6 Degree of Freedom (6-DoF) IMU featuring a triple-axis accelerometer with an extended ±32g range and a triple-axis gyroscope. It shares the same pinout and firmware compatibility as the LS...
Delivered by Tue 30 Jun
SparkFun Environmental Sensor Breakout - BME680 (Qwiic)
SKU: SF-SEN-16466 | Brand: SparkFun
A complete environmental sensor breakout based on the Bosch BME680, combining gas sensing (VOC), temperature, humidity, and barometric pressure in a compact 25.4 × 25.4mm (1" × 1") board. The gas sensor detects a wide...
Delivered by Fri 19 Jun
Adafruit HTU31 Temperature & Humidity Sensor Breakout Board
SKU: AF-4832 | Brand: Adafruit
The Adafruit HTU31 is a third-generation I²C temperature and humidity sensor from TE, offering improved accuracy and useful extras over its predecessor, the HTU21D. With typical humidity accuracy of ±2% (at 20–100% RH...
Delivered by Tue 30 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
