Sensors & Input
Explore our extensive range of sensor modules and input devices, stocked locally for fast delivery across Australia. Whether you're building a weather station, robot, or smart home project, you'll find temperature, humidity, gas, motion, distance, pressure, and biometric sensors to suit any application.
Perfect for Arduino and Raspberry Pi makers, STEM students, and professional developers alike. From IMUs and GPS modules to NFC readers and data loggers, everything you need to add real-world sensing to your next project is right here.
Octopus Temperature Sensor Brick TMP36 Analog for Arduino Micro:bit
SKU: EF-EF04079 | Brand: ElecFreaks
Octopus TMP36 Temperature Sensor Brick is a temperature sensor with low voltage and accurate celsius read. It can provide voltage output,which forms a linear relationship with celsius temperature. TMP36 do not need an...
Delivered by Wed 17 Jun
Strain Gauge Load Cell - 4 Wires - 5Kg
SKU: AF-4541 | Brand: Adafruit
A strain gauge is a type of electronic sensor used to measure force or strain (big surprise there). They are made of an insulating flexible backing with a metallic foil pattern. The resistance of a strain gauge change...
Delivered by Wed 17 Jun
HC-SR04 Ultrasonic Sensor Distance Measuring Module Ultra01+
SKU: EF-EF03085 | Brand: ElecFreaks
The HC-SR04 is a widely used ultrasonic distance sensor that provides non-contact measurement from 2 cm to 450 cm with up to 3 mm resolution. It uses a 40 kHz ultrasonic transducer pair — one transmitter and one recei...
Delivered by Wed 17 Jun
SparkFun weather:bit - micro:bit Carrier Board (Qwiic)
SKU: SF-DEV-15837 | Brand: SparkFun
The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional weather station. With the weather:bit you will have acces...
Delivered by Wed 17 Jun
Gravity: 8-Digital LED Segment Display Module (Red)
SKU: DF-DFR0646-R | Brand: DFRobot
An 8-digit red LED segment display module with Gravity I2C interface. This module can display numbers, basic characters, and supports 16 levels of brightness adjustment — ideal for clocks, counters, dashboards, and da...
Delivered by Wed 17 Jun
Octopus ADKeypad
SKU: EF-EF04017 | Brand: ElecFreaks
Octopus Electronic Bricks, you can use them to build electronics projects just as easy as piling bricks. By using Octopus electronic bricks, you may connect Arduino / Freaduino compatible boards easily with various...
Delivered by Wed 17 Jun
Ring:bit Car Accessories (Sonar:bit，Tracking Module and LED Light bar)
SKU: EF-EF03435 | Brand: ElecFreaks
An accessory pack for the ElecFreaks Ring:bit Car V2, adding obstacle avoidance, line-following, and colourful LED lighting to your micro:bit-powered car. The kit includes three modules that plug directly into the Rin...
Delivered by Wed 17 Jun
Octopus Alphanumeric LED Brick
SKU: EF-EF04058 | Brand: ElecFreaks
A common cathode alphanumeric LED display module driven by the HT16K33 chip over I2C. The 0.56-inch digit height makes it suitable for displaying letters, numbers, and basic symbols in electronics projects and interac...
Delivered by Wed 17 Jun
Adafruit LSM303AGR Accelerometer Magnetometer - STEMMA QT Qwiic
SKU: AF-4413 | Brand: Adafruit
The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses mag...
Delivered by Wed 17 Jun
PSRAM Camera Module (OV2640)
SKU: M5-U038 | Brand: Little Bird
Description M5CameraX is a development board for image recognition. It features an ESP32(4M Flash + 520K RAM) chip and 2-Megapixel carmera(OV2640).M5Camera offers plenty of storage, with an extra 4 Mbyte ...
Delivered by Wed 17 Jun
Gravity: URM09 Ultrasonic Sensor ( I²C)
SKU: DF-SEN0304 | Brand: DFRobot
DFRobot URM09 is an ultrasonic sensor specifically designed for fast ranging and obstacle avoidance application. Its measuring frequency can reach up to 50Hz. The sensor adopts built-in temperature compensation and I2...
Delivered by Wed 17 Jun
Octopus Crash Sensor Brick
SKU: EF-EF04013 | Brand: ElecFreaks
The Octopus Crash Sensor Brick is a simple collision detection module based on a momentary crash switch. When physical contact is made, the switch triggers a digital signal — making it ideal for bump detection in robo...
Delivered by Wed 17 Jun
SparkFun Grid-EYE Infrared Array Breakout - AMG8833 (Qwiic)
SKU: SF-SEN-14607 | Brand: SparkFun
Get ready to be able to see like the Predator! The SparkFun Grid-EYE Infrared Array Breakout board is an 8x8 thermopile array, meaning you have a square array of 64 pixels capable of independent temperature detec...
Delivered by Wed 17 Jun
SparkFun Logic Level Converter - Single Supply
SKU: SF-PRT-14765 | Brand: SparkFun
The SparkFun Single Supply Logic Level Converter is logic level and power supply translator in one small package. This little board breaks out the Texas Instruments TXB0104 4-bit bi-directional voltage-level tran...
Delivered by Wed 17 Jun
Temperature and Humidity Sensor Module KY-028
SKU: LB-LR0010 | Brand: Little Bird
Digital TempTemperature sensing module using an NTC thermistor. The output signal at ‘DO’ switches high when the preset (adjustable) temperature is reached. An analog output signal from the sensor is availab...
Delivered by Wed 17 Jun
Rainbow HAT
SKU: PR-PIM242 | Brand: Little Bird
Rainbow HAT has a buffet of sensors, inputs and displays to explore Android ThingsTM. Use it as a weather station, a clock, a timer or stopwatch, a mood light, or endless other things. We've worked with the Android...
Delivered by Wed 17 Jun
Rainbow HAT
SKU: PR-PIM253 | Brand: Little Bird
Rainbow HAT is a feature-packed add-on board for the Raspberry Pi, loaded with sensors, inputs, displays, and LEDs. Use it as a weather station, clock, timer, mood light, or as a hands-on introduction to multiple Pi c...
Delivered by Wed 17 Jun
SparkFun Qwiic OpenLog
SKU: SF-DEV-15164 | Brand: SparkFun
The SparkFun Qwiic OpenLog is an I²C-based data logger that stores serial data to a microSD card. Based on the popular OpenLog, this version replaces the serial interface with I²C and Qwiic connectors, allowing you to...
Delivered by Wed 17 Jun
Flora Lux Sensor - TSL2561 Light Sensor [v1.0]
SKU: AF-1246 | Brand: Adafruit
Add light-reactive sensing to your wearable Flora project with this high precision Lux sensor. The TSL2561 luminosity sensor is an advanced digital light sensor, ideal for use in a wide range of light situations. Comp...
Delivered by Wed 17 Jun
AM2320 Digital Temperature and Humidity Sensor
SKU: PI-COM1700 | Brand: Pimoroni
The AM2320 is a digital temperature and humidity sensor with an I2C interface. Its straightforward I2C communication makes it easy to connect to any Raspberry Pi or Arduino, and it works alongside other I2C sensors an...
Delivered by Wed 17 Jun
Compare your options
All buying guides
The Teacher's Guide to micro:bit Robots: Kits, Buggies, and Robotics Compared
Compare micro:bit-compatible robot kits, buggies, and robotics platforms by age range, assembly difficulty, sensors, and curriculum fit — for classrooms, clubs, and home learners across Australia.
49 products compared
Title The Maker's Guide to ADCs: Resolution, Speed, and Interface Compared
Compare analogue-to-digital converters by bit depth, sample rate, and bus (I²C vs SPI) to pick the right chip for your Arduino, Raspberry Pi, or microcontroller project.
16 products compared
