Sensors & Input

SKU: AF-4754 | Brand: Adafruit

The BNO085 from Hillcrest Laboratories is a 9-DOF IMU with built-in sensor fusion — it combines accelerometer, gyroscope and magnetometer data on-chip and delivers ready-to-use orientation, motion detection and activi...

SKU: AF-4885 | Brand: Adafruit

The Adafruit Sensirion SHT40 is a high-accuracy temperature and humidity sensor featuring a true I2C interface for simple two-wire communication. Part of the fourth generation of Sensirion's acclaimed SHT sensor famil...

SKU: AF-4681 | Brand: Adafruit

The Adafruit BH1750 Light Sensor is a 16-bit ambient light sensor from Rohm that provides measurements directly in lux — the SI unit for illuminance. This makes it easy to compare readings against reference values or ...

SKU: AF-4366 | Brand: Adafruit

The Adafruit TLV493D is a 3-axis magnetometer designed for detecting and tracking nearby magnets in three dimensions. Manufactured by Infineon, this sensor measures magnetic fields across the X, Y, and Z axes with 12-...

SKU: AF-4479 | Brand: Adafruit

The Adafruit LIS3MDL is a triple-axis magnetometer (compass) breakout from ST, with selectable measurement ranges from ±4 gauss (±400 µT) up to ±16 gauss (±1600 µT). It's ideal for detecting magnetic north, measuring ...

SKU: AF-4867 | Brand: Adafruit

The Adafruit SCD-30 is a true NDIR (Non-Dispersive Infrared) CO2 sensor that directly measures carbon dioxide concentration in ambient air, rather than estimating it from volatile organic compounds. With an integrated...

SKU: AF-4831 | Brand: Adafruit

The Adafruit LTR390 is a dual-purpose UV and ambient light sensor with true UVA sensing at a peak spectral response between 300 and 350 nm. Unlike UV index approximation sensors, the LTR390 has a genuine UV photodiode...

SKU: AF-4716 | Brand: Adafruit

The Adafruit MS8607 is a factory-calibrated 3-in-1 sensor that measures barometric pressure, relative humidity, and temperature over I2C. Made by TE Connectivity, this PHT (Pressure, Humidity, Temperature) sensor is a...

SKU: AF-5665 | Brand: Adafruit

The Adafruit Sensirion SHT45 is the highest-accuracy sensor in the SHT4x family, delivering ±1.0% typical relative humidity accuracy and ±0.1 °C typical temperature accuracy. This version does not include a PTFE membr...

SKU: AF-5309 | Brand: Adafruit

The Adafruit MSA311 is a compact, low-cost triple-axis accelerometer with 14-bit resolution and a rich set of built-in motion detection features. Very similar to the MSA301 but with an updated I2C address (0x62 instea...

SKU: AF-4488 | Brand: Adafruit

The Adafruit LIS2MDL is a triple-axis magnetometer (compass) breakout from ST, capable of sensing magnetic fields across a wide ±50 gauss (±5000 µT) range with no range configuration required. It's ideal for detecting...

SKU: AF-4494 | Brand: Adafruit

The Adafruit DPS310 is a high-precision barometric pressure and altitude sensor from Infineon, mounted on a breakout board with STEMMA QT / Qwiic connectors for solderless I2C wiring. It delivers ±1 hPa absolute accur...

SKU: AF-5374 | Brand: Adafruit

The Adafruit ADXL375 is a high-G triple-axis accelerometer capable of measuring up to ±200g of force. It communicates via I2C or SPI and includes STEMMA QT connectors for solderless I2C connections. An on-board 3.3V r...

SKU: SF-SEN-23352 | Brand: SparkFun

QR codes are a great way for users to communicate with microcontrollers, whether it’s passing WiFi credentials to set up connectivity or sending personal information to fill out a digital badge. Reading them from a ma...

SKU: SF-SEN-19096 | Brand: SparkFun

The SparkFun BME688 Environmental Sensor is a breakout that combines a gas scanning sensor with temperature, humidity, and barometric pressure sensing for a complete environmental sensor in a single package. The ga...

SKU: SF-DEV-17047 | Brand: SparkFun

The SparkFun Qwiic GPIO adds eight additional digital I/O pins to your project via I2C, based on the TCA9534 I/O Expander from Texas Instruments. Read and write pins just like standard Arduino digital pins using the i...

SKU: SF-SEN-16295 | Brand: SparkFun

The MCP9600 Breakout is a high accuracy Thermocouple Amplifier equipped with an I2C interface, accessed over our Qwiic system. Inside the chip are two temperature sensors, one for the thermocouple itself (the hot junc...

SKU: SF-SEN-22494 | Brand: SparkFun

The STHS34PF80 sensor, from ST Microelectronics, is designed to measure the precise black-body radiation (as described by Planck's law) of an object; as well as monitor ambient temperature conditions within its 80° fi...

SKU: SF-DEV-15837 | Brand: SparkFun

The SparkFun weather:bit is a fully loaded "carrier" board for the micro:bit that, when combined with the micro:bit, provides you with a fully functional weather station. With the weather:bit you will have acces...

SKU: AF-4413 | Brand: Adafruit

The Adafruit LSM303AGR combines a triple-axis accelerometer and triple-axis magnetometer in a single breakout board. The accelerometer measures gravity to determine which way is down, while the magnetometer senses mag...