Robotics

SKU: DF-FIT0297 | Brand: DFRobot

This is a 600mm (23.62") servo extension cable. This comes in very handy when your servo is further away from the controller than the wire on the servo allows. Male connector on one end goes to controller, female c...

SKU: SF-ROB-10551 | Brand: SparkFun

These small steppers are a great way to get things moving, especially when positioning and repeatability is a concern. When using a current limiting driver such as the Easydriver or Big Easydriver, a 12 volt power su...

SKU: AF-3244 | Brand: Adafruit

A compact three-layer round robot chassis kit with two DC drive motors, matching wheels, and a caster ball for balance. The high-strength anodised aluminium alloy frame provides a sturdy platform for building your own...

SKU: DF-FIT0486 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses ca...

SKU: DF-FIT0503 | Brand: DFRobot

INTRODUCTION This is a miniature stepper motor with 100:1 metal reduction gear box for enhanced torque. It has a voltage input range of 5 - 12V DC. This product is suitable for the 3D printers and applications wh...

SKU: DF-FIT0792 | Brand: DFRobot

A pack of four coreless micro motors measuring 6 × 14 mm, reaching 55,000 RPM at 3.7V. The longest in the 6 mm diameter range, this variant offers the most torque while maintaining compatibility with micro drone prope...

SKU: EC-ARS27361T | Brand: Elecrow

This motor shield uses dual TB6612 MOSFET drivers and a PCA9685PW I2C PWM controller to drive up to 4 DC motors or 2 stepper motors from an Arduino or compatible board. All motor control and speed management is handle...

SKU: EF-EF03423 | Brand: ElecFreaks

The Ring:bit expansion board is a simple PCB for the micro:bit. The Ring:bit extends the micro:bit's 3 GPIO ports. We will use this module to convert the P0/P1/P2 port to the common GVS port. It can be loaded 3 AAA ba...

SKU: DF-SEN0250 | Brand: DFRobot

The BMI160 6-axis inertial motion sensor is a new product from DFRobot. It is based on Bosch BMI160 6-axis MEMS sensor which integrates 16-bit 3-axis accelerometer with ultra-low-power 3-axis gyroscope. Bosch BMI160 ...

SKU: AF-3948 | Brand: Adafruit

A durable steel ball caster with smooth, fluid motion — ideal for providing a third contact point on small robot platforms. The 20mm overall height pairs well with common robot chassis and TT motor setups, and the two...

SKU: AF-3949 | Brand: Adafruit

A compact steel ball caster that provides smooth, omnidirectional movement for small robots and wheeled projects. With a 16mm overall height, it's well-suited as a third support point for two-wheeled robot chassis. E...

SKU: DF-SEN0245 | Brand: DFRobot

The VL53L0X laser range finder is a high-precision distance sensor that based on new Time-of-Flight (ToF) principle. VL53L0X provides accurate distance measurement whatever the target reflection unlike traditional ...

SKU: AF-1411 | Brand: Adafruit

The Adafruit 16-Channel PWM/Servo Shield brings PCA9685-based servo and PWM control to any Arduino in a convenient shield format. Using only I2C (SCL and SDA), the shield provides 16 channels of 12-bit PWM output with...

SKU: SF-ROB-09065 | Brand: SparkFun

Here is a simple, low-cost, high quality servo for all your mechatronic needs. This servo is very similar in size and specifications to the Hitec HS-55. This little guy is able to take in 6 volts and deliver 20.8 oz-i...

SKU: SF-SEN-10289 | Brand: SparkFun

This AT407 basic tilt switch can easily be used to detect orientation. Inside the can is a ball that make contact with the pins when the case is upright. Tilt the case over and the balls don’t touch, thus not making a...

SKU: DF-FIT0482 | Brand: DFRobot

INTRODUCTION A new micro metal gear motor with a difference! This motor comes with a built-in encoder which measures the motor's speed in real time. The average output number of pulses ca...

SKU: LB-LS0297 | Brand: Little Bird

A comprehensive 81-piece gear assortment for robotics, mechanical projects, and STEM education. This set includes a variety of gear types and sizes to suit different drive configurations and gear ratios. Perfect for ...

SKU: LB-LS7259-180 | Brand: Little Bird

A durable 9G micro servo with full metal gears and 180° rotation. Designed for WPL and MN series RC vehicles and custom robotics projects, it delivers reliable performance and long service life in compact builds. Key...

SKU: WS-31391 | Brand: Waveshare

Ensure that your mechanical projects are powered with precision and durability by integrating the WP5320/WP5335 Large Torque 180° Digital Servo. This robust and high-performance servo is designed to provide exceptiona...

SKU: DF-SER0048 | Brand: DFRobot

This compact 9g servo is designed for the Maqueen Mechanic system, giving your Maqueen Plus smooth, reliable movement for add-on mechanical builds.It uses high-quality metal gears and a metal servo connecting plate, w...