Robotics & Motion

SKU: DF-DFR1030 | Brand: DFRobot

This is a Linear array solid LiDAR. Based on the principle of Triangulation, it is equipped with related optics, electricity, and algorithm design, to achieve 100 degrees of high-precision laser distance measurement, ...

SKU: DF-SER0060 | Brand: DFRobot

A high-torque digital servo with all-metal gears, an aluminium shell, and IP67 waterproof rating. Delivers up to 35 kg·cm of stall torque at 7V, making it suitable for demanding robotics applications, multi-joint mech...

SKU: DF-DFR0601 | Brand: DFRobot

This is a dual channel DC motor driver with an extremely small size of of 1.97”×1.97”×0.49”. The module comes with two motor channels that can drive two motors simultaneously, and each channel employs an indicator to ...

SKU: DF-FIT0795 | Brand: DFRobot

A pack of four coreless micro motors measuring 8 × 16 mm, reaching 50,000 RPM at 3.7V. With the widest diameter and highest current draw (170 mA) in the coreless micro motor range, these deliver the most torque — idea...

SKU: AF-5065 | Brand: Adafruit

Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This mak...

SKU: LB-LS2209 | Brand: Little Bird

A mounting bracket designed to attach an HC-SR04 ultrasonic ranging module and an analogue servo to a smart car chassis. Enables pan-and-scan obstacle detection for robotics projects. Key Features HC-SR04 Compatibl...

SKU: DF-FIT0654-1 | Brand: DFRobot

Note: The kits include two pairs of Mecanum wheels (80mm): two left-handed wheels and two right-handed wheels. Please pay attention to the L and R noted on the back of the product when installing,What wheels should yo...

SKU: EC-MCS01584R | Brand: Elecrow

The Relay Shield v1.1 is an Arduino compatible smart module with 4 mechanical relays providing an easy way to control high voltage. The max switching power is 35VDC 70W for each channel. It can be directly controlled ...

SKU: AF-4547 | Brand: Adafruit

A small submersible DC water pump for fountains, plant-watering systems, and other beginner projects. The pump draws water in from the side of the plastic casing and pushes it out through the tubing port. It runs on 3...

SKU: DF-SER0046 | Brand: DFRobot

A 9g micro servo with an extended 270° rotation range, metal gears, and built-in analog feedback (0–3.3V). The wider rotation range makes it suitable for applications requiring more travel than a standard 180° servo, ...

SKU: AF-4280 | Brand: Adafruit

The Adafruit DC & Stepper Motor Bonnet drives up to 4 DC motors or 2 stepper motors from your Raspberry Pi, with full PWM speed control. It uses a dedicated PWM driver chip over I2C, so only two pins (SDA/SCL) are nee...

SKU: AF-4252 | Brand: Adafruit

This plastic adapter connects a micro servo to LEGO-compatible cross axle parts such as gears, wheels, and beams. Simply push the adapter's spline housing onto the shaft of a compatible micro servo, and the other end ...

SKU: EF-EF09083 | Brand: ElecFreaks

The ElecFreaks EF90D is a compact 360-degree continuous rotation digital servo designed for use with the BBC micro:bit. It operates at 3V, making it well-suited for micro:bit-powered robotics and motorised projects. T...

SKU: EF-EF08201 | Brand: ElecFreaks

The Ring:bit Car is a small DIY smart car driven by the BBC micro:bit and the Ring:bit. The Ring:bit extends the micro:bit's 3 GPIO ports and allow for different sensors and components to be easily attached to the ...

SKU: LB-CTC-2018 | Brand: Little Bird

This kit contains everything you need for the "Crack the Code" segment in the NSW technology curriculum and a few spares of the easy to lose components. Products may vary from images but will ensure they are suitabl...

SKU: AF-3882 | Brand: Adafruit

What's this? A record player for ants?? Not at all! This is a DVD/CD Spindle Motor, that thing that's inside a CD or DVD player, that turns the disc around really fast. These motors have some great benefits that ma...

SKU: AF-3768 | Brand: Adafruit

You have a TT motor, but you need to attach it to your CNC project, eh? Not so easy if you don't have an L-Bracket DC Motor Mount just like this fine one here! Made of 2mm aluminum metal, it's got a solid co...

SKU: DF-FIT0033 | Brand: DFRobot

A 300 mm (11.8″) servo extension cable for when your servo needs to reach further than its built-in lead allows. Male connector on one end plugs into your controller, female connector mates with the servo. Also works ...

SKU: AF-996 | Brand: Adafruit

Control the flow of fluid using the flow of electrons! This liquid valve would make a great addition to your robotic gardening, aquarium, or pool project. There are two 1/2" (Nominal NPS) outlets. Normally, the val...

SKU: AF-1200 | Brand: Adafruit

Get your robot rolling with this durable and smooth metal ball caster. We like the size (not too big, not too small) and surprisingly smooth motion of this caster. It's also really easy to attach, with two screw mount...