Robotics & Motion

SKU: MG-980-0529 | Brand: Little Bird

Speed into STEAM with this indi kit designed to engage kids ages 4+ in hours of exciting exploratory learning and play at home. Perfect forparents, grandparents, caretakers, or anyone looking to equip their young lear...

SKU: AF-4554 | Brand: Adafruit

The Adafruit TDK InvenSense ICM-20948 is a compact 9-DoF Inertial Measurement Unit that packs a 3-axis accelerometer, 3-axis gyroscope, and 3-axis magnetometer into a single breakout board. It pairs InvenSense's MEMS ...

SKU: DF-ROB0153 | Brand: DFRobot

If you are gonna build a robotics project, then you need to check out this guy, Black Gladiator. He is an agile tracked robot chassis, low noise, and easy to control, which could be a good partner for your any tank-li...

SKU: AF-2305 | Brand: Adafruit

The Adafruit DRV2605L Haptic Motor Controller is a dedicated driver for haptic feedback motors, controlled via I2C. Rather than simple on/off control, the TI DRV2605L chip offers a library of over 100 built-in vibrati...

SKU: AF-169 | Brand: Adafruit

Tiny little servo can rotate approximately 180 degrees (90 in each direction), and works just like the standard kinds you're used to but smaller. You can use any servo code, hardware or library to control these servos...

SKU: AF-324 | Brand: Adafruit

A stepper motor to satisfy all your robotics needs! This 4-wire bipolar stepper has 1.8° per step for smooth motion and a nice holding torque. The motor was specified to have a max current of 350mA so that it could...

SKU: DF-FIT0403 | Brand: DFRobot

This is a Gear Motor w/Encoder, model No. GB37Y3530-12V-90EN. It is a powerful 12V motor with a 90:1 metal gearbox and an integrated quadrature encoder that provides a resolution of 16 counts per revolution of the ...

SKU: SF-ROB-10398 | Brand: SparkFun

This vacuum pump really sucks! This pump operates at 12V and has enough suction for most small projects. We even used one to make our very own universal gripper using coffee grounds, balloon and some other parts. F...

SKU: DF-FIT0492-A | Brand: DFRobot

A high-torque 12V DC geared motor with a 100:1 metal gear reducer. Built with 100% copper coils and a metal gearbox for durability, this compact motor delivers up to 50 kg·cm of stall torque at 50 RPM — ideal for robo...

SKU: DF-DFR0429 | Brand: DFRobot

INTRODUCTION An ordinary DC motor requires an H Bridge to work with a microcontroller such as an UNO. For newcomers to electronics, the process of finding the right motor driver, connecti...

SKU: DF-MBT0021-EN-18650 | Brand: DFRobot

Maqueen Plus V2 is a STEAM educational robot platform for the micro:bit, made for classroom teaching, after-school projects and robot competitions. It builds on Maqueen Lite and earlier Maqueen Plus robots with a larg...

SKU: DF-ROB0148-EN-LB | Brand: DFRobot

This compact STEAM education robot is built around the Maqueen 4.2 core and is designed for children aged 8 and up. It arrives pre-assembled, with the motors, wheels, support wheel, housing and battery holder already ...

SKU: DF-FIT0801 | Brand: DFRobot

A compact DC-powered vacuum pump ideal for beginners building inflatable or pneumatic projects. With a power consumption of just 2.5W at 5V, it can share the same power supply as DC motors or servo systems in your pro...

SKU: DF-FIT0620 | Brand: DFRobot

A 12V DC electric solenoid lock with a steel case and steel casting parts. Apply power to retract the latch and unlock; remove power and the latch springs back to the locked position. The lock includes signal feedback...

SKU: SF-SEN-14727 | Brand: SparkFun

This miniature straight bar load cell (sometimes called a strain gauge) can translate up to 100g of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that cha...

SKU: LB-LR0214-50 | Brand: Little Bird

The 42BYG is a NEMA 17 bipolar stepper motor with a shaft-reversed design, commonly used in 3D printers, CNC machines, and DIY motion-control projects. With a 1.8° step angle and 40 N·cm holding torque, it provides re...

SKU: DF-FIT0200 | Brand: DFRobot

This immersible pump can be used to water your plants, make a fountain or waterfall, even change your fish tank wter.It works quietly with the sound level under 30db. The pump has a filter inside as well as a suct...

SKU: SF-ROB-08449 | Brand: SparkFun

A vibration motor! This itty-bitty, shaftless vibratory motor is perfect for non-audible indicators. Use in any number of applications to indicate to the wearer when a status has changed. All moving parts are protecte...

SKU: SF-ROB-13302 | Brand: SparkFun

These are a pair of hobby gearmotors from DAGU. These gearmotors are the same ones recommended for use in the Shadow Chassis and offer a cheap and easy-to-use setup to get your wheels turning. Each Hobby Gearmotor als...

SKU: AF-3190 | Brand: Adafruit

The Adafruit DRV8871 is a single-channel brushed DC motor driver breakout capable of delivering up to 3.6 A peak current with a wide 6.5–45V motor voltage range. Its resistor-set current limiting and built-in PWM supp...