Robotics & Motion

SKU: PL-2454 | Brand: Pololu

The QTR-L-1A reflectance sensor incorporates a right-angle infrared LED and a right-angle phototransistor in an inexpensive, tiny 0.35″ × 0.3″ module that can be mounted almost anywhere and is great for e...

SKU: DF-FIT0014 | Brand: DFRobot

How can your robot rule the world with an iron fist if it doesn't have a hand? This LG-NS robot gripper makes a great addition to a small arm or mobile base. The gripper features injection molded components and ...

SKU: SF-ROB-12350 | Brand: SparkFun

These plastic shaft spacers have an inner diameter of 1/4” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

SKU: SF-ROB-09347 | Brand: SparkFun

Here, for all your mechatronic needs, is a simple, high quality continuous continuous rotation servo motor. This servo is able to take in 6 volts and deliver 66.7 oz-in. of maximum torque at 70 r/min. A standard 3-p...

SKU: SF-DEV-14285 | Brand: SparkFun

The SparkFun Wireless Motor Driver Shield is designed to make connecting motors, sensors and other components to your Arduino-based project as fast and easy as possible. The heart of the Wireless Motor Driver Shield i...

SKU: SF-ROB-12316 | Brand: SparkFun

These micro gearmotors are incredibly tough and feature full metal gears. They have a gear ratio of 30:1 and operate up to 12 volts and have a stall torque of 9 oz-in. and a max speed of 900 RPM. Each micro gearmot...

SKU: DF-FIT0036 | Brand: DFRobot

This is a high quality plastic servo horn. It fits DF series servos. Made specifically for DF series servos. SPECIFICATIONS Outside diameter: 20mm(0.79") Center hole diameter: 3mm(0.12") Moun...

SKU: SF-ROB-09238 | Brand: SparkFun

This is a simple, but very powerful stepper motor with a 4-wire cable attached. This is a Bipolar Motor. Features: Step Angle (degrees) :1.8 2 Phase Rated Voltage : 12V Rated Current : 0.33A Holding Torque : 2.3k...

SKU: DF-KIT0020 | Brand: DFRobot

An Ultrasonic sensor with scan capability is a must have feature for most robot application. This Ultrasonic scanner kit provides a cost effective way to have such feature for your robot application. This kit is...

SKU: SF-KIT-14180 | Brand: SparkFun

Robots are fun, and Arduinos are easy. So wouldn’t it be nice if there were a kit that included everything you need to get your Arduino device set up to control a simple two-motor-circuit buddy? The SparkFun Ardumoto ...

SKU: SF-ROB-12193 | Brand: SparkFun

These plastic shaft spacers have an inner diameter of 1” and a thickness of 1/16”. These spacers are ideal for spacing out an area between a bearing and a shaft collar to reduce metal to metal contact.

SKU: DF-FIT0261 | Brand: DFRobot

INTRODUCTION Shape Memory metals that were developed by NASA for the space industry, and have been used for increasing applications down on earth.For example,there have been limited studie...

SKU: SF-DEV-14129 | Brand: SparkFun

The Ardumoto Shield is a dual-motor controller for Arduino based on the L298 H-bridge. It can drive two DC motors at up to 2A per channel, making it an excellent platform for RC vehicles and small autonomous robots. ...

SKU: SF-SEN-08713 | Brand: SparkFun

This is a piezoresistive force sensor from Tekscan. The harder you press, the lower the sensor’s resistance. Pressing lightly, the resistance changes from infinite to ~300k. The sensor itself is thin and flexible, but...

SKU: DF-SER0030 | Brand: DFRobot

This is a most powerful standard servo motor from DFRobot so far. A servomotor is a rotary actuator that allows precise control of angular position. This is specifically designed for the robotics application which ...

SKU: PL-1410 | Brand: Pololu

This 0.036″-thick stainless steel plate can be mounted to the front of the Zumo chassis to create a slanted, bulldozer-like blade for pushing around objects, such as other mini-sumo robots.

SKU: SF-ROB-12105 | Brand: SparkFun

These enclosures allow you to mount your micro gearmotor to other Actobotics products easily. Once your gearmotor is inserted, you can take advantage of the 0.77” hole pattern. These enclosures have a length of 1.14”,...

SKU: SF-COM-12096 | Brand: SparkFun

This 0.012" Flexinol® Actuator Wires (aka shape memory Nitinol) is a one foot long piece of nickel-titanium alloy that can flex and contract when a specific amount of heat or current is applied to it and are made spec...

SKU: AF-2943 | Brand: Adafruit

This anodised aluminium chassis provides a sturdy, lightweight foundation for building your own mini robot rover. With plenty of mounting holes and slots, it's easy to configure for 2-wheel or 4-wheel designs and simp...

SKU: AF-2944 | Brand: Adafruit

An aluminium top plate accessory for the Mini Robot Rover Chassis, adding a second level to your robot platform. Mount electronics, batteries, or sensors on top while keeping the lower chassis clear for motors and wir...